FC3 SMP builds do NOT contain ext3 drivers in the build!!!!
Fred Skrotzki
fskrotzki at cephiretech.com
Thu Dec 2 19:14:53 UTC 2004
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,0)
# kernel /vmlinuz-version ro root=/dev/sda2
# initrd /initrd-version.img
#boot=/dev/sda
default=1
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title Fedora Core (2.6.9-1.681_FC3)
root (hd0,0)
kernel /vmlinuz-2.6.9-1.681_FC3 ro root=LABEL=/1
initrd /initrd-2.6.9-1.681_FC3.img
title Fedora Core (2.6.9-1.681_FC3smp)
root (hd0,0)
kernel /vmlinuz-2.6.9-1.681_FC3smp ro root=LABEL=/1
initrd /initrd-2.6.9-1.681_FC3smp.img
title Fedora Core (2.6.9-1.667smp)
root (hd0,0)
kernel /vmlinuz-2.6.9-1.667smp ro root=LABEL=/1
initrd /initrd-2.6.9-1.667smp.img
title Fedora Core-up (2.6.9-1.667)
root (hd0,0)
kernel /vmlinuz-2.6.9-1.667 ro root=LABEL=/1
initrd /initrd-2.6.9-1.667.img
-----Original Message-----
From: fedora-list-bounces at redhat.com
[mailto:fedora-list-bounces at redhat.com]On Behalf Of Terry Polzin
Sent: Thursday, December 02, 2004 2:07 PM
To: For users of Fedora Core releases
Subject: Re: FC3 SMP builds do NOT contain ext3 drivers in the build!!!!
On Thursday 02 December 2004 14:02, Fred Skrotzki wrote:
> Drive was low level formatted and verified before and after 3 builds. It
> boots and works fine under single proc. I even build it on another drive
> just to be sure.
>
> BOX is a full blown server class system. hot swap drives, etc...
> HP LP2000r dual 1.0 Ghz P4
> 1 gig ram
>
> here is the drive config
> Device Boot Start End Blocks Id System
> /dev/sda1 * 1 13 104391 83 Linux /boot
> ext3 /dev/sda2 14 1548 12329887+ 83 Linux /
> ext3 /dev/sda3 1549 1809 2096482+ 82 Linux
> swap swap /dev/sda4 1810 4427 21029085 5
> Extended
> /dev/sda5 1810 2070 2096451 83 Linux
> /var/log ext3
>
> fstab
> LABEL=/1 / ext3 defaults 1 1
> LABEL=/boot /boot ext3 defaults 1 2
> none /dev/pts devpts gid=5,mode=620 0 0
> none /dev/shm tmpfs defaults 0 0
> none /proc proc defaults 0 0
> none /sys sysfs defaults 0 0
> LABEL=/var/log1 /var/log ext3 defaults 1 2
> LABEL=SWAP-sda3 swap swap defaults 0 0
>
> Here is what is left on the screen when booting using SMP:
>
> ext3: unknown symbol journal_get_write_access
> ext3: unknown symbol journal_undo_access
> ext3: unknown symbol journal_create_access
> ext3: unknown symbol journal_destroy
> ext3: unknown symbol journal_clear_error
> ext3: unknown symbol journal_stop
> ext3: unknown symbol journal_init_inode
> ext3: unknown symbol journal_start
> ext3: unknown symbol log_wait_command
> ext3: unknown symbol journal_release_buffer
> ext3: unknown symbol journal_check_available_features
> ext3: unknown symbol journal_abort
> ext3: unknown symbol journal_restart
> insmod: error inserting '/lib/ext2.ko": -1 unknown symbol in module
> ERROR: /sbin/udevstart exited abnormally
> creating root drive
> umount /sys failed: 16
> Mounting root file system
> mount: error 19 mounting ext3
> mount: error 2 mounting none
> switching to new root
> switchroot: mount failed: 22
> umount /initrd/dev failed: 2
> Kernel panic - not syncing......
Would you send on a copy of your grub.conf.
--
fedora-list mailing list
fedora-list at redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
More information about the fedora-list
mailing list