[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Lost all network connectivity after clean FC3 install



Hi Jay:

I agree with your diagnosis of eth0/eth1 gateway
collision, I just do not know how to take care of it.

Before I did not have to set a GW for eth0 and, if I
remember correctly, had a GW = 10.0.0.1 for eth1.

Anyway, my /sbin/route output:

Destination     Gateway         Genmask         Flags
Metric Ref    Use Iface
68.187.12.0     *               255.255.252.0   U    
0      0        0 eth0
169.254.0.0     *               255.255.0.0     U    
0      0        0 eth0
default         cable3-0-10-rcp 0.0.0.0         UG   
0      0        0 eth0

Note that my eth1 is down because if it goes up, my
internet connection fails.

Thanks for your help.

Enrico


 --- Jay Scherrer <jay scherrer com> ha scritto: 
> Enrico,
> 
> What is the  setting for eth0?
> eth0 and eth1 must have different ip's.
> I am not familiar with 10.0.0.0's netmask. I use
> 192.168.0.0 with a 
> netmask of 255.255.255.0 as I am not running such a
> large network.
> But if your eth1 has 10.0.0.1
> your eth0 set to DHCP
> and your other lan set to 10.0.0.50
> 
> 
> What does:  /sbin/route
> Show? 
> Have you set eth0 and eth1 with /sbin/route?
> example: /sbin/route add gateway etho
> (because  you don't have an firm ip address)
> for eth1 you would: /sbin/route add 10.0.0.1
> read your man route pages first.
> It looks like you have a collision between eth0 and
> eth1 for the 
> gateway. 


		
___________________________________ 
Nuovo Yahoo! Messenger: E' molto più divertente: Audibles, Avatar, Webcam, Giochi, Rubrica? Scaricalo ora! 
http://it.messenger.yahoo.it


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]