CD burning problem
Steve Fink
stevef at netvantix.com
Sun Dec 19 00:58:57 UTC 2004
On Sun, 2004-12-19 at 01:50 +0100, Jim Dishaw (dishawjp) wrote:
> Steve wrote:
> >#diff lshal-no-media.txt lshal-with-media.txt
>
> I did as you suggested (except for changing the output
> redirection from "<" to ">") and got the following output
> from the diff command
> :
> [root at eunix ~]# diff lshal-with-media.txt lshal-no-media.txt
> 2c2
> < Dumping 34 device(s) from the Global Device List:
> ---
> > Dumping 33 device(s) from the Global Device List:
> 4,35d3
> < udi = '/org/freedesktop/Hal/devices/block_3_64-0'
> < info.udi = '/org/freedesktop/Hal/devices/block_3_64-0' (string)
> < volume.disc.is_rewritable = false (bool)
> < volume.disc.is_appendable = false (bool)
> < volume.disc.is_blank = true (bool)
> < volume.disc.has_data = false (bool)
> < volume.disc.has_audio = false (bool)
> < volume.disc.type = 'cd_r' (string)
> < volume.size = 2048 (0x800) (uint64)
> < volume.block_size = 2048 (0x800) (int)
> < volume.num_blocks = 4 (0x4) (int)
> < volume.is_disc = true (bool)
> < volume.is_mounted = false (bool)
> < volume.mount_point = '' (string)
> < volume.label = '' (string)
> < volume.uuid = '' (string)
> < volume.fsversion = '' (string)
> < volume.fsusage = '' (string)
> < volume.fstype = '' (string)
> < info.product = 'Volume' (string)
> < info.parent = '/org/freedesktop/Hal/devices/block_3_64' (string)
> < info.category = 'volume' (string)
> < info.capabilities = 'block volume' (string)
> < info.bus = 'block' (string)
> < block.no_partitions = true (bool)
> < block.have_scanned = false (bool)
> < block.is_volume = true (bool)
> < block.device = '/dev/hdb' (string)
> < block.major = 3 (0x3) (int)
> < block.minor = 64 (0x40) (int)
> < block.storage_device = '/org/freedesktop/Hal/devices/block_3_64' (string)
> <
> 479d446
> < volume.is_partition = false (bool)
> 517c484
> < block.have_scanned = true (bool)
> ---
> > block.have_scanned = false (bool)
> 894c861
> < Dumped 34 device(s) from the Global Device List:
> ---
> > Dumped 33 device(s) from the Global Device List:
> [root at eunix ~]#
>
> This would seem to indicate that the problem is not with
> hal, if I understand this correctly. I have tried burning
> as both normal user and root with no difference, which would
> seem to indicate that it is not a permissions error. At
> first I was thinking that it was another SELinux-udev issue
> but this also seems not to be the case. I'm really doing
> a lot of head scratching here. I do know that it's not
> hardware since I can burn by booting to FC2.
>
> Thanks for the response and any further input sincerely
> appreciated.
>
> Jim
>
>
>
> --
> This is an email sent via the webforum on http://fcp.homelinux.org
>
You're correct, the change indicates the problem is probably not hal.
Best of Luck,
Steve
More information about the fedora-list
mailing list