A SCSI problem

Mike Westkamper mjwestkamper at weiinc.com
Mon Feb 2 20:45:01 UTC 2004


See below

-----Original Message-----
From: fedora-list-admin at redhat.com
[mailto:fedora-list-admin at redhat.com]On Behalf Of Mike Westkamper
Sent: Friday, January 30, 2004 11:39 AM
To: fedora-list at redhat.com
Subject: RE: A SCSI problem




-----Original Message-----
From: fedora-list-admin at redhat.com
[mailto:fedora-list-admin at redhat.com]On Behalf Of Alexander Dalloz
Sent: Friday, January 30, 2004 6:07 AM
To: fedora-list at redhat.com
Subject: RE: A SCSI problem


Am Fr, den 30.01.2004 schrieb Mike 
Westkamper um 01:23:

[ snip ]

> Greetings:
> 
> After a few days away I am back trying to solve this problem.
> 
> I modified the modules.conf to:
> ===============
> alias eth0 3c509
> alias scsi_host_adapter aic7xxx
> options aic7xxx 'aic7xxx=probe_eisa_vl.tag_info:{{}.{.10}}.seltime:1'

Do you really need this options line? I am not sure about which SCSI
adapter you use. If it is a normal PCI adapter, even embedded and not a
single slot card, these options certainly cause errors. It was just an
example from modinfo I posted you before. It is often helpful to ask
google for information by other users if you have problems with special
hardware. It is good to know the whole and exact product name to search
for.

> ===============
> 
> Next I did a mkinitrd and logged the results:
> ===============
> Looking for deps of module scsi_mod
> Looking for deps of module sd_mod	scsi_mod
> Looking for deps of module scsi_mod
> Looking for deps of module unknown
> Looking for deps of module aic7xxx	scsi_mod
> Looking for deps of module scsi_mod
> Looking for deps of module ide-disk
> Looking for deps of module ext2
> Using modules:  ./kernel/drivers/scsi/scsi_mod.o
> ./kernel/drivers/scsi/sd_mod.o ./kernel/drivers/scsi/aic7xxx/aic7xxx.o
> Using loopback device /dev/loop0
> /sbin/nash -> /tmp/initrd.iF2107/bin/nash
> /sbin/insmod.static -> /tmp/initrd.iF2107/bin/insmod
> `/lib/modules/2.4.22-1.2149.nptlcustom/./kernel/drivers/scsi/scsi_mod.o' ->
> `/tmp/initrd.iF2107/lib/scsi_mod.o'
> `/lib/modules/2.4.22-1.2149.nptlcustom/./kernel/drivers/scsi/sd_mod.o' ->
> `/tmp/initrd.iF2107/lib/sd_mod.o'
> `/lib/modules/2.4.22-1.2149.nptlcustom/./kernel/drivers/scsi/aic7xxx/aic7xxx
> .o' -> `/tmp/initrd.iF2107/lib/aic7xxx.o'
> Loading module scsi_mod
> Loading module sd_mod
> Loading module aic7xxx with options
> 'aic7xxx=probe_eisa_vl.tag_info:{{}.{.10}}.seltime:1'
> ===============

ramdisk did build properly

> Upon rebooting the machine, carefully choosing the correct kernel, the boot
> process proceeds normally until it produced the following error on the
> console:
> ===============
> /lib/aic7xxx.0
>  insmod errors can be caused by incorrect IO or IRQ .....
> /bin/insmod exited abnormally
> ===============

Ok, the problem is a ressources conflict. Maybe the options line I
commented above is causing trouble.

> The error text may not be exactly correct as it was scrolling when I tried
> to catch it. I could not find the message in the boot sequence logged in
> /var/log/messages or dmesg or in boot.log A fdisk -l did not show the SCSI
> drives.
> 
> Next, if I do an insmod aic7xxx the module loads and the drives appear.

After loading the module properly, can you do a "cat /proc/interrupts",
"cat /proc/pci" (if it's a PCI adapter) and "cat /proc/ioports" to see
which hardware resources the SCSI adapter uses?

> Help is really appreciated.

Alexander




Thanks again,

The SCSI Adapter is an embedded Adaptec AHA274x on an EISA bus. It is dual channel with 8 36 GB drives attached.

[root at auxfs proc]# cat interrupts
           CPU0
  0:    6063610          XT-PIC  timer
  1:       4124          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:      26457          XT-PIC  eth0
  8:          1          XT-PIC  rtc
 11:        491          XT-PIC  aic7xxx
 14:      65633          XT-PIC  ide0
NMI:          0
ERR:          0
[root at auxfs proc]# cat ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
0213-0213 : isapnp read
0220-022f : 3c509 PnP
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0a79-0a79 : isapnp write
9c00-9cff : aic7xxx

Mike


Below is the output of messages. It looks as if the aic7xxx is installed then crashes. Anu Ideas?

Feb  2 10:16:03 auxfs syslogd 1.4.1: restart.
Feb  2 10:16:03 auxfs syslog: syslogd startup succeeded
Feb  2 10:16:03 auxfs kernel: klogd 1.4.1, log source = /proc/kmsg started.
Feb  2 10:16:03 auxfs kernel: Linux version 2.4.22-1.2149.nptlcustom (root at auxfs) (gcc version 3.2.3 20030422 (Red Hat Linux 3.2.3-6)) #2 Wed Jan 21 09:34:10 EST 2004
Feb  2 10:16:03 auxfs kernel: BIOS-provided physical RAM map:
Feb  2 10:16:04 auxfs kernel:  BIOS-88: 0000000000000000 - 000000000009f000 (usable)
Feb  2 10:16:04 auxfs kernel:  BIOS-88: 0000000000100000 - 00000000040ffc00 (usable)
Feb  2 10:16:04 auxfs kernel: 64MB LOWMEM available.
Feb  2 10:16:04 auxfs kernel: On node 0 totalpages: 16639
Feb  2 10:16:04 auxfs kernel: zone(0): 4096 pages.
Feb  2 10:16:04 auxfs kernel: zone(1): 12543 pages.
Feb  2 10:16:04 auxfs kernel: zone(2): 0 pages.
Feb  2 10:16:04 auxfs kernel: DMI not present.
Feb  2 10:16:04 auxfs kernel: ACPI: Unable to locate RSDP
Feb  2 10:16:04 auxfs syslog: klogd startup succeeded
Feb  2 10:16:04 auxfs kernel: Kernel command line: ro root=LABEL=/
Feb  2 10:16:04 auxfs kernel: Initializing CPU#0
Feb  2 10:16:04 auxfs kernel: Detected 60.002 MHz processor.
Feb  2 10:16:04 auxfs kernel: Console: colour VGA+ 80x25
Feb  2 10:16:04 auxfs kernel: Calibrating delay loop... 119.19 BogoMIPS
Feb  2 10:16:04 auxfs kernel: Memory: 62228k/66556k available (1358k kernel code, 3940k reserved, 1094k data, 120k init, 0k highmem)
Feb  2 10:16:04 auxfs kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Feb  2 10:16:04 auxfs kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Feb  2 10:16:04 auxfs kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Feb  2 10:16:04 auxfs kernel: Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Feb  2 10:16:04 auxfs kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Feb  2 10:16:04 auxfs kernel: Intel Pentium with F0 0F bug - workaround enabled.
Feb  2 10:16:04 auxfs kernel: CPU: Intel Pentium 60/66 stepping 07
Feb  2 10:16:04 auxfs kernel: Checking 'hlt' instruction... OK.
Feb  2 10:16:04 auxfs kernel: POSIX conformance testing by UNIFIX
Feb  2 10:16:04 auxfs kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
Feb  2 10:16:04 auxfs kernel: mtrr: detected mtrr type: none
Feb  2 10:16:04 auxfs kernel: ACPI: Subsystem revision 20031002
Feb  2 10:16:04 auxfs kernel: ACPI: Interpreter disabled.
Feb  2 10:16:04 auxfs kernel: PCI: System does not support PCI
Feb  2 10:16:04 auxfs kernel: isapnp: Scanning for PnP cards...
Feb  2 10:16:04 auxfs kernel: isapnp: Card '3Com 3C509B EtherLink III'
Feb  2 10:16:04 auxfs kernel: isapnp: 1 Plug & Play card detected total
Feb  2 10:16:04 auxfs kernel: Linux NET4.0 for Linux 2.4
Feb  2 10:16:04 auxfs kernel: Based upon Swansea University Computer Society NET3.039
Feb  2 10:16:04 auxfs kernel: Initializing RT netlink socket
Feb  2 10:16:04 auxfs kernel: apm: BIOS not found.
Feb  2 10:16:04 auxfs kernel: Starting kswapd
Feb  2 10:16:00 auxfs ifup:  done. 
Feb  2 10:16:04 auxfs kernel: VFS: Disk quotas vdquot_6.5.1
Feb  2 10:16:04 auxfs kernel: Detected PS/2 Mouse Port.
Feb  2 10:16:04 auxfs kernel: pty: 512 Unix98 ptys configured
Feb  2 10:16:04 auxfs kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Feb  2 10:16:04 auxfs kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Feb  2 10:16:04 auxfs kernel: ttyS1 at 0x02f8 (irq = 3) is a 16550A
Feb  2 10:16:04 auxfs kernel: Real Time Clock Driver v1.10e
Feb  2 10:16:04 auxfs kernel: NET4: Frame Diverter 0.46
Feb  2 10:16:04 auxfs kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Feb  2 10:16:04 auxfs kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Feb  2 10:16:04 auxfs kernel: ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Feb  2 10:16:04 auxfs kernel: hda: QUANTUM FIREBALL SE2.1A, ATA DISK drive
Feb  2 10:16:04 auxfs kernel: hdb: ST31720A, ATA DISK drive
Feb  2 10:16:04 auxfs kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb  2 10:16:04 auxfs kernel: hda: attached ide-disk driver.
Feb  2 10:16:04 auxfs kernel: hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Feb  2 10:16:04 auxfs kernel: hda: task_no_data_intr: error=0x04 { DriveStatusError }
Feb  2 10:16:04 auxfs kernel: hda: 4124736 sectors (2112 MB) w/80KiB Cache, CHS=4092/16/63
Feb  2 10:16:04 auxfs kernel: hdb: attached ide-disk driver.
Feb  2 10:16:04 auxfs kernel: hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Feb  2 10:16:04 auxfs kernel: hdb: task_no_data_intr: error=0x04 { DriveStatusError }
Feb  2 10:16:04 auxfs kernel: hdb: 3331852 sectors (1706 MB), CHS=3305/16/63
Feb  2 10:16:04 auxfs kernel: Partition check:
Feb  2 10:16:04 auxfs kernel:  hda: hda1 hda2 hda3 hda4 < hda5 >
Feb  2 10:16:04 auxfs kernel:  hdb: hdb1
Feb  2 10:16:04 auxfs kernel: ide: late registration of driver.
Feb  2 10:16:04 auxfs kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Feb  2 10:16:04 auxfs kernel: md: Autodetecting RAID arrays.
Feb  2 10:16:04 auxfs kernel: md: autorun ...
Feb  2 10:16:04 auxfs kernel: md: ... autorun DONE.
Feb  2 10:16:04 auxfs kernel: Initializing Cryptographic API
Feb  2 10:16:04 auxfs kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Feb  2 10:16:04 auxfs kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Feb  2 10:16:04 auxfs kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
Feb  2 10:16:04 auxfs kernel: TCP: Hash tables configured (established 4096 bind 8192)
Feb  2 10:16:04 auxfs kernel: Linux IP multicast router 0.06 plus PIM-SM
Feb  2 10:16:04 auxfs kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Feb  2 10:16:05 auxfs kernel: RAMDISK: Compressed image found at block 0
Feb  2 10:16:05 auxfs kernel: Freeing initrd memory: 235k freed
Feb  2 10:16:05 auxfs kernel: VFS: Mounted root (ext2 filesystem).
Feb  2 10:16:05 auxfs kernel: SCSI subsystem driver Revision: 1.00
Feb  2 10:16:05 auxfs kernel: Freeing unused kernel memory: 120k freed
Feb  2 10:16:05 auxfs kernel: Adding Swap: 167288k swap-space (priority -1)
Feb  2 10:16:05 auxfs kernel: parport0: PC-style at 0x378 [PCSPP]
Feb  2 10:16:05 auxfs kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
Feb  2 10:16:05 auxfs kernel:         <Adaptec aic7770 SCSI adapter>
Feb  2 10:16:05 auxfs kernel:         aic7770: Twin Channel, A SCSI Id=7, B SCSI Id=7, primary A, 4/253 SCBs
Feb  2 10:16:05 auxfs kernel: 
Feb  2 10:16:05 auxfs kernel: (scsi0:A:0): 10.000MB/s transfers (10.000MHz, offset 15)
Feb  2 10:16:05 auxfs kernel:   Vendor: IBM       Model: DCAS-32160        Rev: S65A
Feb  2 10:16:05 auxfs kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
Feb  2 10:16:05 auxfs kernel: (scsi0:A:1): 10.000MB/s transfers (10.000MHz, offset 15)
Feb  2 10:16:05 auxfs kernel:   Vendor: IBM       Model: DNES-318350       Rev: SA30
Feb  2 10:16:05 auxfs kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
Feb  2 10:16:05 auxfs kernel: (scsi0:A:2): 10.000MB/s transfers (10.000MHz, offset 15)
Feb  2 10:16:05 auxfs kernel:   Vendor: IBM       Model: DNES-318350       Rev: SA30
Feb  2 10:16:05 auxfs kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
Feb  2 10:16:05 auxfs kernel: (scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 15)
Feb  2 10:16:05 auxfs kernel:   Vendor: IBM       Model: DNES-318350       Rev: SA30
Feb  2 10:16:05 auxfs kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
Feb  2 10:16:05 auxfs kernel: (scsi0:A:6): 10.000MB/s transfers (10.000MHz, offset 15)
Feb  2 10:16:05 auxfs kernel:   Vendor: PLEXTOR   Model: CD-ROM PX-40TS    Rev: 1.04
Feb  2 10:16:05 auxfs kernel:   Type:   CD-ROM                             ANSI SCSI revision: 02
Feb  2 10:16:05 auxfs kernel: (scsi0:B:0): 10.000MB/s transfers (10.000MHz, offset 15)
Feb  2 10:16:05 auxfs kernel:   Vendor: IBM       Model: DNES-318350       Rev: SA30
Feb  2 10:16:05 auxfs kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
Feb  2 10:16:05 auxfs kernel: (scsi0:B:1): 10.000MB/s transfers (10.000MHz, offset 15)
Feb  2 10:16:05 auxfs kernel:   Vendor: IBM       Model: DNES-318350       Rev: SA30
Feb  2 10:16:05 auxfs kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
Feb  2 10:16:05 auxfs kernel: (scsi0:B:2): 10.000MB/s transfers (10.000MHz, offset 15)
Feb  2 10:16:05 auxfs kernel:   Vendor: IBM       Model: DNES-318350       Rev: SA30
Feb  2 10:16:05 auxfs kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
Feb  2 10:16:05 auxfs kernel: (scsi0:B:6): 10.000MB/s transfers (10.000MHz, offset 15)
Feb  2 10:16:05 auxfs kernel:   Vendor: IBM       Model: DNES-318350       Rev: SA30
Feb  2 10:16:05 auxfs kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
Feb  2 10:16:05 auxfs kernel: scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
Feb  2 10:16:05 auxfs kernel: scsi0:A:1:0: Tagged Queuing enabled.  Depth 32
Feb  2 10:16:05 auxfs kernel: scsi0:A:2:0: Tagged Queuing enabled.  Depth 32
Feb  2 10:16:05 auxfs kernel: scsi0:A:3:0: Tagged Queuing enabled.  Depth 32
Feb  2 10:16:05 auxfs kernel: scsi0:B:0:0: Tagged Queuing enabled.  Depth 32
Feb  2 10:16:05 auxfs kernel: scsi0:B:1:0: Tagged Queuing enabled.  Depth 32
Feb  2 10:16:05 auxfs kernel: scsi0:B:2:0: Tagged Queuing enabled.  Depth 32
Feb  2 10:16:05 auxfs kernel: scsi0:B:6:0: Tagged Queuing enabled.  Depth 32
Feb  2 10:16:05 auxfs kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Feb  2 10:16:05 auxfs kernel: Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Feb  2 10:16:05 auxfs kernel: Attached scsi disk sdc at scsi0, channel 0, id 2, lun 0
Feb  2 10:16:05 auxfs kernel: Attached scsi disk sdd at scsi0, channel 0, id 3, lun 0
Feb  2 10:16:05 auxfs kernel: Attached scsi disk sde at scsi0, channel 1, id 0, lun 0
Feb  2 10:16:05 auxfs kernel: Attached scsi disk sdf at scsi0, channel 1, id 1, lun 0
Feb  2 10:16:05 auxfs kernel: Attached scsi disk sdg at scsi0, channel 1, id 2, lun 0
Feb  2 10:16:05 auxfs kernel: Attached scsi disk sdh at scsi0, channel 1, id 6, lun 0
Feb  2 10:16:05 auxfs kernel: SCSI device sda: 4226725 512-byte hdwr sectors (2164 MB)
Feb  2 10:16:05 auxfs kernel:  sda: sda1 sda2 sda3
Feb  2 10:16:05 auxfs kernel: SCSI device sdb: 35843670 512-byte hdwr sectors (18352 MB)
Feb  2 10:16:05 auxfs kernel:  sdb: sdb1
Feb  2 10:16:05 auxfs kernel: SCSI device sdc: 35843670 512-byte hdwr sectors (18352 MB)
Feb  2 10:16:05 auxfs kernel:  sdc: sdc1
Feb  2 10:16:05 auxfs kernel: SCSI device sdd: 35843670 512-byte hdwr sectors (18352 MB)
Feb  2 10:16:05 auxfs kernel:  sdd: sdd1
Feb  2 10:16:05 auxfs kernel: SCSI device sde: 35843670 512-byte hdwr sectors (18352 MB)
Feb  2 10:16:05 auxfs kernel:  sde: sde1
Feb  2 10:16:05 auxfs kernel: SCSI device sdf: 35843670 512-byte hdwr sectors (18352 MB)
Feb  2 10:16:05 auxfs kernel:  sdf: sdf1
Feb  2 10:16:05 auxfs kernel: SCSI device sdg: 35843670 512-byte hdwr sectors (18352 MB)
Feb  2 10:16:05 auxfs kernel:  sdg: sdg1
Feb  2 10:16:05 auxfs kernel: SCSI device sdh: 35843670 512-byte hdwr sectors (18352 MB)
Feb  2 10:16:05 auxfs kernel:  sdh: sdh1
Feb  2 10:16:05 auxfs kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
Feb  2 10:16:05 auxfs kernel: sr0: scsi-1 drive
Feb  2 10:16:05 auxfs kernel: Uniform CD-ROM driver Revision: 3.12
Feb  2 10:16:05 auxfs kernel: scsi : 0 hosts left.
Feb  2 10:16:05 auxfs kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000
Feb  2 10:16:05 auxfs kernel:  printing eip:
Feb  2 10:16:05 auxfs kernel: c01d3fdb
Feb  2 10:16:05 auxfs kernel: *pde = 00000000
Feb  2 10:16:05 auxfs kernel: Oops: 0002
Feb  2 10:16:05 auxfs kernel: sg sr_mod cdrom aic7xxx sd_mod scsi_mod  
Feb  2 10:16:05 auxfs kernel: CPU:    0
Feb  2 10:16:05 auxfs kernel: EIP:    0060:[<c01d3fdb>]    Not tainted
Feb  2 10:16:05 auxfs kernel: EFLAGS: 00010286
Feb  2 10:16:05 auxfs kernel: 
Feb  2 10:16:05 auxfs kernel: EIP is at pci_unregister_driver [kernel] 0xb (2.4.22-1.2149.nptlcustom)
Feb  2 10:16:05 auxfs kernel: eax: 00000000   ebx: 00000000   ecx: c5067540   edx: 00000000
Feb  2 10:16:05 auxfs kernel: esi: c5069320   edi: 00000000   ebp: bfea94e8   esp: c35edf74
Feb  2 10:16:05 auxfs kernel: ds: 0068   es: 0068   ss: 0068
Feb  2 10:16:05 auxfs kernel: Process modprobe (pid: 384, stackpage=c35ed000)
Feb  2 10:16:05 auxfs kernel: Stack: 00000000 00000000 c505de7a c5069320 c504a807 00000001 c5067540 00003282 
Feb  2 10:16:05 auxfs kernel:        c5044000 c011d0dc c5044000 00000000 00000000 c011c445 c5044000 00000000 
Feb  2 10:16:05 auxfs kernel:        c35ec000 00000000 00000000 c01093a3 bff98f1a bff98f1a 09fcc3c8 00000000 
Feb  2 10:16:05 auxfs kernel: Call Trace:   [<c505de7a>] ahc_linux_pci_exit [aic7xxx] 0xa (0xc35edf7c)
Feb  2 10:16:05 auxfs kernel: [<c5069320>] aic7xxx_pci_driver [aic7xxx] 0x0 (0xc35edf80)
Feb  2 10:16:05 auxfs kernel: [<c504a807>] cleanup_module [aic7xxx] 0x37 (0xc35edf84)
Feb  2 10:16:05 auxfs kernel: [<c5067540>] aic7xxx_driver_template [aic7xxx] 0x0 (0xc35edf8c)
Feb  2 10:16:05 auxfs kernel: [<c011d0dc>] free_module [kernel] 0xac (0xc35edf98)
Feb  2 10:16:05 auxfs kernel: [<c011c445>] sys_delete_module [kernel] 0xa5 (0xc35edfa8)
Feb  2 10:16:05 auxfs kernel: [<c01093a3>] system_call [kernel] 0x33 (0xc35edfc0)
Feb  2 10:16:05 auxfs kernel: 
Feb  2 10:16:05 auxfs kernel: 
Feb  2 10:16:05 auxfs kernel: Code: 89 02 c7 06 00 00 00 00 8b 1d 88 48 33 c0 89 50 04 81 fb 88 
Feb  2 10:16:05 auxfs kernel:  <6>inserting floppy driver for 2.4.22-1.2149.nptlcustom
Feb  2 10:16:05 auxfs kernel: Floppy drive(s): fd0 is 1.44M
Feb  2 10:16:05 auxfs kernel: FDC 0 is a post-1991 82077
Feb  2 10:16:05 auxfs kernel: eth0: 3c5x9 at 0x220, 10baseT port, address  00 60 97 50 f2 5f, IRQ 5.
Feb  2 10:16:05 auxfs kernel: 3c509.c:1.19 16Oct2002 becker at scyld.com
Feb  2 10:16:05 auxfs kernel: http://www.scyld.com/network/3c509.html
Feb  2 10:16:05 auxfs kernel: ip_tables: (C) 2000-2002 Netfilter core team
Feb  2 10:16:05 auxfs kernel: eth0: 3c5x9 at 0x220, 10baseT port, address  00 60 97 50 f2 5f, IRQ 5.
Feb  2 10:16:05 auxfs kernel: 3c509.c:1.19 16Oct2002 becker at scyld.com
Feb  2 10:16:05 auxfs kernel: http://www.scyld.com/network/3c509.html
Feb  2 10:16:05 auxfs kernel: ip_tables: (C) 2000-2002 Netfilter core team
Feb  2 10:16:05 auxfs kernel: eth0: Setting 3c5x9/3c5x9B half-duplex mode if_port: 0, sw_info: 1321
Feb  2 10:16:05 auxfs kernel: eth0: Setting Rx mode to 1 addresses.
Feb  2 10:16:06 auxfs irqbalance: irqbalance startup succeeded
Feb  2 10:16:07 auxfs portmap: portmap startup succeeded
Feb  2 10:16:09 auxfs rpc.statd[700]: Version 1.0.6 Starting
Feb  2 10:16:09 auxfs nfslock: rpc.statd startup succeeded
Feb  2 10:16:10 auxfs random: Initializing random number generator:  succeeded
Feb  2 10:16:11 auxfs rc: Starting pcmcia:  succeeded
Feb  2 10:16:12 auxfs netfs: Mounting other filesystems:  succeeded
Feb  2 10:16:15 auxfs autofs: automount startup succeeded
Feb  2 10:16:16 auxfs smartd[779]: smartd version 5.21 Copyright (C) 2002-3 Bruce Allen 
Feb  2 10:16:16 auxfs smartd[779]: Home page is http://smartmontools.sourceforge.net/  
Feb  2 10:16:16 auxfs smartd[779]: Opened configuration file /etc/smartd.conf 
Feb  2 10:16:16 auxfs smartd[779]: Configuration file /etc/smartd.conf parsed. 
Feb  2 10:16:16 auxfs smartd[779]: Device: /dev/hda, opened 
Feb  2 10:16:16 auxfs smartd[779]: Device: /dev/hda, not found in smartd database. 
Feb  2 10:16:16 auxfs smartd[779]: Device: /dev/hda, is SMART capable. Adding to "monitor" list. 
Feb  2 10:16:16 auxfs smartd[779]: Monitoring 1 ATA and 0 SCSI devices 
Feb  2 10:16:16 auxfs smartd: smartd startup succeeded
Feb  2 10:16:17 auxfs smartd[781]: smartd has fork()ed into background mode. New PID=781. 
Feb  2 10:16:20 auxfs sshd:  succeeded
Feb  2 10:16:22 auxfs xinetd: xinetd startup succeeded
Feb  2 10:16:24 auxfs xinetd[808]: xinetd Version 2.3.12 started with libwrap loadavg options compiled in.
Feb  2 10:16:24 auxfs xinetd[808]: Started working: 2 available services
Feb  2 10:16:31 auxfs sendmail: sendmail startup succeeded
Feb  2 10:16:34 auxfs sendmail: sm-client startup succeeded
Feb  2 10:16:36 auxfs crond: crond startup succeeded
Feb  2 10:16:37 auxfs anacron: anacron startup succeeded
Feb  2 10:16:38 auxfs atd: atd startup succeeded
Feb  2 10:16:45 auxfs login(pam_unix)[877]: session opened for user root by LOGIN(uid=0)
Feb  2 10:16:45 auxfs  -- root[877]: ROOT LOGIN ON tty1
Feb  2 10:26:01 auxfs login(pam_unix)[878]: authentication failure; logname=LOGIN uid=0 euid=0 tty=tty2 ruser= rhost=  user=root
Feb  2 10:26:04 auxfs login[878]: FAILED LOGIN 1 FROM (null) FOR root, Authentication failure
Feb  2 10:26:07 auxfs login(pam_unix)[878]: session opened for user root by LOGIN(uid=0)
Feb  2 10:26:07 auxfs  -- root[878]: ROOT LOGIN ON tty2
Feb  2 10:27:50 auxfs smb: smbd startup succeeded
Feb  2 10:28:01 auxfs smb: nmbd startup succeeded

























-- 
Alexander Dalloz | Enger, Germany | GPG key 1024D/ED695653 1999-07-13
Fedora GNU/Linux Core 1 (Yarrow) on Athlon CPU kernel 2.4.22-1.2149.nptl
Sirendipity 11:58:58 up 20:46, 7 users, 0.19, 0.14, 0.09 
                   [ Γνωθι σ'αυτον - gnothi seauton ]



-- 
fedora-list mailing list
fedora-list at redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list


-- 
fedora-list mailing list
fedora-list at redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list





More information about the fedora-list mailing list