Raid 1

[Rob]

Here is a howto:

http://www.tldp.org/HOWTO/Software-RAID-HOWTO-6.html#ss6.3

Rob

----- Original Message ----- 
From: "Jeetendra Mirchandani" <jeetu at cse.iitb.ac.in>
To: <fedora-list at redhat.com>
Sent: Friday, February 20, 2004 2:47 AM
Subject: Re: Raid 1


>
> i have a promise FastTrak S150 TX4 raid controller with 4 x 160 Gb sata
> drives
>
> though i couldnt build the drivers for FC1, they are working perfectly on
> rh9. It has a fasttrak utility installed in bios that lets u make arrays
>
> and in linux it just shows 'sda' and not md0 etc...that md0 is sowtware
> raid....
>
> ok, now someone tell me...if i had software raid, how do i rebuild in case
> of a crash?
> the h/w one will have the bios utility....what abt the software?
>
>
> Jeetu
>
>
> On Mon, 16 Feb 2004, Robert Hartung* wrote:
>
> > So to sum it up:
> >
> >   3ware is safe.  Belkin and even the Promise FastTrak TX2000 probably
won't
> > work as a true hardware only solution. So 3ware it is.  At least the
Belkin
> > card was a hand-me-down at $0 cost.
> >
> > Thanks,
> >
> > Bob
> >
> >
> > Quoting Sam Barnett-Cormack <s.barnett-cormack at lancaster.ac.uk>:
> >
> > > On Mon, 16 Feb 2004, WA9ALS - John wrote:
> > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Sam Barnett-Cormack" <s.barnett-cormack at lancaster.ac.uk>
> > > > To: <fedora-list at redhat.com>
> > > > Sent: Monday, February 16, 2004 6:21 AM
> > > > Subject: RE: Raid 1
> > > >
> > > >
> > > > > On Mon, 16 Feb 2004, Alexander Dalloz wrote:
> > > > >
> > > > > > Am Mo, den 16.02.2004 schrieb Sam Barnett-Cormack um 12:08:
> > > > > > > On Mon, 16 Feb 2004, Alexander Dalloz wrote:
> > > > > > >
> > > > > > > > Am Mo, den 16.02.2004 schrieb kaze um 04:57:
> > > > > > > > > I might be totally wrong, but if you set up the RAID as
> > > hardware
> > > > RAID, from
> > > > > > > > > the OS's point of view there is only one hard drive - so
there
> > > is
> > > > _no_ OS /
> > > > > > > > > software stuff to do.
> > > > > > > >
> > > > > > > > You are wrong, in the case you are speaking of those "fake"
RAID
> > > > > > > > adapters like the Belkin IDE the OP asked about or the low
budget
> > > > > > > > Promise or HighPoint controllers. they are just BIOS
supported
> > > pure
> > > > > > > > software (with special, often closed source driver)
controllers.
> > > > > > > > Speaking of IDE RAID controllers only the 3ware controllers
are
> > > real
> > > > > > > > hardware RAID controllers. They have an own logic chip doing
the
> > > > job.
> > > > > > >
> > > > > > > Actually, a lot of these cheap IDE RAID controllers really do
do
> > > > > > > something, and don't require any drivers. They do require a
> > > braindead
> > > > OS
> > > > > > > which trusts the BIOS completely. Of course, they generally do
only
> > > do
> > > > > > > RIAD0 and or RAID1, which are very light on the computation.
> > > > > >
> > > > > > Hi!
> > > > > >
> > > > > > Do you have specific examples about controllers (chips) working
as
> > > > > > RAID0/1 without any additional driver and on which OS? At least
you
> > > are
> > > > > > not speaking about Linux, aren't you?
> > > > >
> > > > > Not linux, no - as it's not braindead enough to let the BIOS tell
it
> > > > > what's going on. Windows is - the card in my desktop at work works
with
> > > > > no extra drivers under windows 2k, at least. Windows doesn't even
say
> > > it
> > > > > knows it's RAID. The setup is done entirely through the card's
BIOS.
> > > >
> > > > So if I get a new Dell server with hardware RAID, it that going to
work
> > > > EASILY as a single drive with FC1??
> > >
> > > Depends on what hardware RAID the system uses.
> > >
> > > -- 
> > >
> > > Sam Barnett-Cormack
> > > Software Developer                           |  Student of Physics &
Maths
> > > UK Mirror Service (http://www.mirror.ac.uk)  |  Lancaster University
> > >
> > >
> > > -- 
> > > fedora-list mailing list
> > > fedora-list at redhat.com
> > > To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
> > >
> >
> >
> >
> > -- 
> > fedora-list mailing list
> > fedora-list at redhat.com
> > To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
> >
>
>
> -- 
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list