A7V8X-X help configure hw Sensor!?!?
Giuseppe Cavallo
giuseppecavallo at email.it
Thu Jan 15 01:06:31 UTC 2004
Alle 00:14, giovedì 15 gennaio 2004, ne... ha scritto:
> On Jan 14, 2004 at 23:12, Giuseppe Cavallo in a soothing rage wrote:
> >Hi all,
> >I have many problem when I must configure the hardware sensor of my MB
> > Asus A7V8X-X. If samebody have already configured this MB in fedora
> > kernel 2.4.22-1.2140.nptl can help me please?!?! I send a lspci output:
>
> See http://www2.lm-sensors.nu/~lm78/ under supported devices.
> Then hit your installation media for lm_sensors or try this
> site: http://atrpms.physik.fu-berlin.de/dist/.
>
> I generally compile i2c and lm_sensors from source from the
> first site I mentioned above.
> HTH
> N.Emile...
After that I install the kernel and the lm_sensor partch I have had this
output with sensors command:
it87-isa-0290
Adapter: ISA adapter
Algorithm: ISA algorithm
VCore 1: +1.65 V (min = +1.42 V, max = +1.57 V) ALARM
VCore 2: +0.00 V (min = +2.40 V, max = +2.61 V) ALARM
+3.3V: +6.56 V (min = +3.14 V, max = +3.46 V) ALARM
+5V: +4.89 V (min = +4.74 V, max = +5.24 V)
+12V: +12.40 V (min = +11.40 V, max = +12.60 V)
-12V: -27.36 V (min = -12.63 V, max = -11.41 V) ALARM
-5V: -13.64 V (min = -5.24 V, max = -4.76 V) ALARM
Stdby: +4.94 V (min = +4.74 V, max = +5.24 V)
VBat: +4.08 V
fan1: 3792 RPM (min = 0 RPM, div = 2)
fan2: 0 RPM (min = 3000 RPM, div = 2) ALARM
fan3: 0 RPM (min = 3000 RPM, div = 2) ALARM
M/B Temp: +42C (low = +20C, high = +40C) sensor = invalid
CPU Temp: +125C (low = +25C, high = +45C) sensor = diode
Temp3: +127C (low = +25C, high = +45C) sensor = invalid
But I think that only fan1 VCore1 are correct, while, the other are misplaced.
Why Have I this temperature? Where is the error??
--
[--Saluti Giuseppe Cavallo--/*ICQ=94835351*/--]
More information about the fedora-list
mailing list