Lexar JumpDrive mount problem

[Alexandre Strube]

Em Dom, 2004-01-18 às 03:54, Dennis Gilmore escreveu:

> > This is for olympus cameras, but the procedure is almost the same for
> > your device. Just the line on /etc/updfstab is different:
> > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=113787

> the bugzilla solution works only on 2.4 kernels  its not working properly on 
> 2.6  so is not a solution for FC2  what i am getting in /var/log/messages is 

Did you loaded every usb modules? fc1 with 2.6 doesn't load it by
default. I've posted something about this some days ago.

> Jan 18 16:42:50 nb1 scsi.agent[3085]: how to add device type= 
> at /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.0/host2/2:0:0:0 ??
> Jan 18 16:42:50 nb1 kernel:   Vendor: LEXAR     Model: DIGITAL FILM      
> Rev: /W1.
> Jan 18 16:42:50 nb1 kernel:   Type:   Direct-Access                      ANSI 
> SCSI revision: 02
> Jan 18 16:42:50 nb1 kernel: SCSI device sda: 251904 512-byte hdwr sectors (129 
> MB)
> Jan 18 16:42:50 nb1 kernel: sda: assuming Write Enabled
> Jan 18 16:42:50 nb1 kernel: sda: assuming drive cache: write through
> Jan 18 16:42:50 nb1 kernel:  sda: sda1
> Jan 18 16:42:50 nb1 kernel: Attached scsi removable disk sda at scsi2, channel 
> 0, id 0, lun 0
> Jan 18 16:42:50 nb1 kernel: Attached scsi generic sg0 at scsi2, channel 0, id 
> 0, lun 0,  type 0
> Jan 18 16:42:51 nb1 modprobe: FATAL: Module ide_probe_mod not found.
> Jan 18 16:42:51 nb1 kernel: updfstab: numerical sysctl 1 23 is obsolete.
> 
> i changed its partition in /etc/updfstab.conf.default from 0 to 1 as my disk 
> keys use /dev/sda1  not /dev/sda but when i booted into 2.4 to test it didnt 

Its ok to use partition 0. As stated in man upfstab:
partition num
     Specifies  a  default  partition  number which should be mounted
     from this device. If 0 is used,  no  partition  number  appears.
     updfstab  always scans /proc/partitions for the proper partition
     number before relying on this value.

My cameras are at /dev/sda1 and it's ok.

> automount  but did create the entries in  /etc/fstab and directories needed 
> ill report back when i find more info on 2.6 kernels

Are you sure you copied the script right? It works fine for me, for
every /mnt/camera device. (See that this is the place unmounted for the
bugzilla script)

-- 
[]s

Alexandre Ganso 
500 FOUR vermelha - Diretor Steel Goose Moto Group