Mouse problems
Roger Grosswiler
roger at gwch.net
Thu Jan 8 18:58:47 UTC 2004
>> Roger Grosswiler wrote:
>>>>Roger Grosswiler wrote:
>>>>
>>>>>Hi,
>>>>>
>>>>>I have a compaq proliant and always the same problem. my mouse is not
>>>>>working. as it never worked on the builting ps/2-port i installed a
>>>>> usb
>>>>>->
>>>>>ps/2-adaptor (HID) . this was working fine, until i had to reinstall
>>>>> my
>>>>>server. since then: doesn't work at all. i indicated also pci=bios-irq
>>>>>for
>>>>>a working mouse....
>>>>>
>>>>
>>>>[snip]
>>>>
>>>>what is the output from /sbin/lsmod? There should be the following
>>>>modules for a USB Mouse
>>>>
>>>>mousedev 5556 3
>>>>hid 24676 0 (unused)
>>>>input 5760 0 [keybdev mousedev hid]
>>>>usb-uhci 26316 0 (unused)
>>>>usbcore 78176 1 [hid usb-uhci]
>>>>
>>>>To me your XF86Config looks fine. I had similar problems on RH8/9
>>>>because of missing modules like HID.
>>>>
>>>>
>>>>>Configuration:
>>>>>--------------------
>>>>>ps/2-mouse (generic, 2-button) connected to a port on the
>>>>>usb-hid-interface.
>>>>
>>>>[snip]
>>>>
>>>>Alex
>>>>
>>>
>>> [root at morpheus root]# /sbin/lsmod
>>> Module Size Used by Not tainted
>>> parport_pc 19076 1 (autoclean)
>>> lp 9060 0 (autoclean)
>>> parport 37056 1 (autoclean) [parport_pc lp]
>>> autofs 13364 0 (autoclean) (unused)
>>> tlan 31836 1
>>> floppy 58012 0 (autoclean)
>>> sg 36492 0 (autoclean)
>>> sr_mod 18168 0 (autoclean)
>>> microcode 4700 0 (autoclean)
>>> ide-scsi 12208 0
>>> ide-cd 35776 0
>>> cdrom 33728 0 [sr_mod ide-cd]
>>> printer 8960 0
>>> scanner 12056 0 (unused)
>>> keybdev 2976 0 (unused)
>>> hid 24708 0 (unused)
>>> usb-ohci 21512 0 (unused)
>>> usbcore 79168 1 [printer scanner hid usb-ohci]
>>> mousedev 5556 2 (autoclean)
>>> input 5888 0 (autoclean) [keybdev hid mousedev]
>>> ext3 71300 2
>>> jbd 52084 2 [ext3]
>>> sym53c8xx 68112 5
>>> sd_mod 13708 10
>>> scsi_mod 108104 5 [sg sr_mod ide-scsi sym53c8xx sd_mod]
>>>
>>> ....seems to look good.....i have also connected the keyboard on the
>>> hid-interface, and this works fine....its just the mouse....as it is a
>>> very old machine, i installed fedora with pci=bios-irq, which worked
>>> fine,
>>> when i installed this machine for the first time...
>>
>> Okay, what happens when you disconnect and reconnect the mouse?
>> Please check it with dmesg | tail -n 20 when you removed the mouse
>> and when you reconnect it.
>
> if i disconnect my mouse, nothings in dmesg. but if i disconnect the
> hid-usb-hub, the following is in dmesg:
> usb.c: USB disconnect on device 01:0a.0-2 address 3
>
> on reconnect you see:
> hub.c: new USB device 01:0a.0-2, assigned address 4
> input: USB HID v1.10 Keyboard [MCT Corp. PS/2 - USB Interface Adaptor] on
> usb1:4.0
> input: USB HID v1.10 Mouse [MCT Corp. PS/2 - USB Interface Adaptor] on
> usb1:4.1
> ...and strangerwise, it works....but i do not not why.......no idea...so i
> hope it will not stop working like it started.
>
> do you have any idea, why it hasn't been working? did my fedora-box need
> some holidays?? ;-))
so, i've been rebooting my machine, and same effect: mouse does no move...
after dis- and reconnecting the hid-interface, the following messages have
been printed in dmesg:
hub.c: new USB device 01:0a.0-2, assigned address 5
input: USB HID v1.10 Keyboard [MCT Corp. PS/2 - USB Interface Adaptor] on
usb1:5.0
input: USB HID v1.10 Mouse [MCT Corp. PS/2 - USB Interface Adaptor] on
usb1:5.1
usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_CONTROL failed dev 5 rqt 128 rq 6 len 9 ret -110
whats the problem?????
>>
>>>
>>> thx anyway, was an idea, or perhaps i have overseen something..?
>>> Roger
>>
>> Alex
>>
>
>
More information about the fedora-list
mailing list