A7V8X-X help configure hw Sensor!?!?

[Giuseppe Cavallo]

Alle 00:14, giovedì 15 gennaio 2004, ne... ha scritto:
> On Jan 14, 2004 at 23:12, Giuseppe Cavallo in a soothing rage wrote:
> >Hi all,
> >I have many problem when I must configure the hardware sensor of my MB
> > Asus A7V8X-X. If samebody have already configured this MB in fedora
> > kernel 2.4.22-1.2140.nptl can help me please?!?! I send a lspci output:
>
> See http://www2.lm-sensors.nu/~lm78/ under supported devices.
> Then hit your installation media for lm_sensors or try this
> site: http://atrpms.physik.fu-berlin.de/dist/.
>
> I generally compile i2c and lm_sensors from source from the
> first site I mentioned above.
> HTH
> N.Emile...

After that I install the kernel and the lm_sensor partch I have had this 
output with sensors command:
it87-isa-0290
Adapter: ISA adapter
Algorithm: ISA algorithm
VCore 1:   +1.65 V  (min =  +1.42 V, max =  +1.57 V)   ALARM
VCore 2:   +0.00 V  (min =  +2.40 V, max =  +2.61 V)   ALARM
+3.3V:     +6.56 V  (min =  +3.14 V, max =  +3.46 V)   ALARM
+5V:       +4.89 V  (min =  +4.74 V, max =  +5.24 V)
+12V:     +12.40 V  (min = +11.40 V, max = +12.60 V)
-12V:     -27.36 V  (min = -12.63 V, max = -11.41 V)   ALARM
-5V:      -13.64 V  (min =  -5.24 V, max =  -4.76 V)   ALARM
Stdby:     +4.94 V  (min =  +4.74 V, max =  +5.24 V)
VBat:      +4.08 V
fan1:     3792 RPM  (min =    0 RPM, div = 2)
fan2:        0 RPM  (min = 3000 RPM, div = 2)          ALARM
fan3:        0 RPM  (min = 3000 RPM, div = 2)          ALARM
M/B Temp:    +42C  (low  =   +20C, high =   +40C)   sensor = invalid
CPU Temp:   +125C  (low  =   +25C, high =   +45C)   sensor = diode
Temp3:      +127C  (low  =   +25C, high =   +45C)   sensor = invalid

But I think that only fan1 VCore1 are correct, while, the other are misplaced. 
Why Have I this temperature? Where is the error?? 

-- 
[--Saluti Giuseppe Cavallo--/*ICQ=94835351*/--]