Mustek 1200 UB Plus USB

[Nikanorov Andrey]

Thanks to Henning Meier-Geinitz. He told me how to make it better.
Just uncomment 'override "mustek-scanexpress-1200-ub-plus"' in
gt68xx.conf file. Then copy SBfw.usb to /usr/share/sane/gt68xx.  In this
case your scanner will be named properly: Mustek ScanExpress 1200 UB
Plus.


В Сбт, 17.01.2004, в 17:10, Nikanorov Andrey пишет:
> I do it!!! 
> All you need, get SBfw.usb from CDROM (from your
> scanner[file:/mnt/cdrom/WinXP]) or download it from Mustek web site.
> Also you can send request to me, and I send you this file only. After
> you should create directory 'gt68xx' in '/usr/share/sane/' and put file
> (SBfw.usb) in it. Then you should rename SBfw.usb to PS1fw.usb. That's
> all.
> 
> Start scanimage -T. You see something like this:
> 
> scanimage: scanning image of size 2563x3531 pixels at 8 bits/pixel
> scanimage: acquiring gray frame, 8 bits/sample
> scanimage: reading one scanline, 2563 bytes...  PASS
> scanimage: reading one byte...          PASS
> scanimage: stepped read, 2 bytes...     PASS
> scanimage: stepped read, 4 bytes...     PASS
> scanimage: stepped read, 8 bytes...     PASS
> scanimage: stepped read, 16 bytes...    PASS
> scanimage: stepped read, 32 bytes...    PASS
> scanimage: stepped read, 64 bytes...    PASS
> scanimage: stepped read, 128 bytes...   PASS
> scanimage: stepped read, 256 bytes...   PASS
> scanimage: stepped read, 512 bytes...   PASS
> scanimage: stepped read, 1024 bytes...  PASS
> scanimage: stepped read, 2048 bytes...  PASS
> scanimage: stepped read, 4096 bytes...  PASS
> scanimage: stepped read, 4095 bytes...  PASS
> scanimage: stepped read, 2047 bytes...  PASS
> scanimage: stepped read, 1023 bytes...  PASS
> scanimage: stepped read, 511 bytes...   PASS
> scanimage: stepped read, 255 bytes...   PASS
> scanimage: stepped read, 127 bytes...   PASS
> scanimage: stepped read, 63 bytes...    PASS
> scanimage: stepped read, 31 bytes...    PASS
> scanimage: stepped read, 15 bytes...    PASS
> scanimage: stepped read, 7 bytes...     PASS
> scanimage: stepped read, 3 bytes...     PASS
> 
> 
> > How coud I configure system to work with this scanner? For now, I'v get
> > error (unable to open device 'gt68xx:/dev/usb/scanner0') when tring to
> > start XSane for example.
> -- 
> Sneak Russian
>