Lexar JumpDrive mount problem
Alexandre Strube
surak at surak.eti.br
Sun Jan 18 18:21:28 UTC 2004
Em Dom, 2004-01-18 às 03:54, Dennis Gilmore escreveu:
> > This is for olympus cameras, but the procedure is almost the same for
> > your device. Just the line on /etc/updfstab is different:
> > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=113787
> the bugzilla solution works only on 2.4 kernels its not working properly on
> 2.6 so is not a solution for FC2 what i am getting in /var/log/messages is
Did you loaded every usb modules? fc1 with 2.6 doesn't load it by
default. I've posted something about this some days ago.
> Jan 18 16:42:50 nb1 scsi.agent[3085]: how to add device type=
> at /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.0/host2/2:0:0:0 ??
> Jan 18 16:42:50 nb1 kernel: Vendor: LEXAR Model: DIGITAL FILM
> Rev: /W1.
> Jan 18 16:42:50 nb1 kernel: Type: Direct-Access ANSI
> SCSI revision: 02
> Jan 18 16:42:50 nb1 kernel: SCSI device sda: 251904 512-byte hdwr sectors (129
> MB)
> Jan 18 16:42:50 nb1 kernel: sda: assuming Write Enabled
> Jan 18 16:42:50 nb1 kernel: sda: assuming drive cache: write through
> Jan 18 16:42:50 nb1 kernel: sda: sda1
> Jan 18 16:42:50 nb1 kernel: Attached scsi removable disk sda at scsi2, channel
> 0, id 0, lun 0
> Jan 18 16:42:50 nb1 kernel: Attached scsi generic sg0 at scsi2, channel 0, id
> 0, lun 0, type 0
> Jan 18 16:42:51 nb1 modprobe: FATAL: Module ide_probe_mod not found.
> Jan 18 16:42:51 nb1 kernel: updfstab: numerical sysctl 1 23 is obsolete.
>
> i changed its partition in /etc/updfstab.conf.default from 0 to 1 as my disk
> keys use /dev/sda1 not /dev/sda but when i booted into 2.4 to test it didnt
Its ok to use partition 0. As stated in man upfstab:
partition num
Specifies a default partition number which should be mounted
from this device. If 0 is used, no partition number appears.
updfstab always scans /proc/partitions for the proper partition
number before relying on this value.
My cameras are at /dev/sda1 and it's ok.
> automount but did create the entries in /etc/fstab and directories needed
> ill report back when i find more info on 2.6 kernels
Are you sure you copied the script right? It works fine for me, for
every /mnt/camera device. (See that this is the place unmounted for the
bugzilla script)
--
[]s
Alexandre Ganso
500 FOUR vermelha - Diretor Steel Goose Moto Group
More information about the fedora-list
mailing list