nvidia again...:-(
Robert Uebbing
robert at uebbing.com
Thu Jan 29 05:53:56 UTC 2004
Since a couple of days I am trying to get my nvidia graphics to work. I
have a Shuttle SN41G2. Fresh Fedora Core 1 install with kernel +
kernel-source update to 2149 (from download.fedora.redhat.com). Building
the network driver nvnet was no problem.
But I am haveing some serious problems with the XServer. I tried NVIDIA
's driver 5328 and 5336 and they install just fine (with CC=gcc32) and
they *seem* to work. Everytime I try to run glxgears the whole system
just freezes and I have to do a hard reset. Sometimes X just crashes
randomly I have to log in again. I did disable the DRI in the
XF86Config, but that did not help. Reading the archives and various
READMEs I come the conclusion that either my XF86Config is still not
correct or I am having problems with the symlinks for the libraries.
Can anyone help ? I am getting desperate...
Thanks for any pointers.
Robert
1. output from ldd /usr/binX11/glxgears:
libGL.so.1 => /usr/lib/tls/libGL.so.1 (0x00dde000)
libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0x00979000)
libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00886000)
libpthread.so.0 => /lib/tls/libpthread.so.0 (0x00989000)
libm.so.6 => /lib/tls/libm.so.6 (0x0085d000)
libc.so.6 => /lib/tls/libc.so.6 (0x00722000)
libGLcore.so.1 => /usr/lib/tls/libGLcore.so.1 (0x00239000)
libdl.so.2 => /lib/libdl.so.2 (0x00881000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x00223000)
2. My XF86Config file:
# XFree86 4 configuration created by redhat-config-xfree86
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name
of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "glx"
Load "extmod"
#Load "fbdevhw"
#Load "record"
Load "freetype"
Load "type1"
# Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "ViewSonic GT775"
DisplaySize 320 240
HorizSync 30.0 - 86.0
VertRefresh 50.0 - 160.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "Videocard vendor"
BoardName "NVIDIA GeForce 4 MX (generic)"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600"
"640x480"
EndSubSection
EndSection
More information about the fedora-list
mailing list