Ethernet card does not work with FC2
Andrea Marin
amarin at mr-service.it
Wed Jul 21 12:36:11 UTC 2004
I see that you have the ipV4 and ipV6 in the same interface "eth0" I'm
not an expert but I think that this is one problem
inet addr:XXX.XXX.XXX.XXX
inet6 addr: fe80::200:39ff:fede:293f/64
you can try to put in your "ifcfg-eth0" file only this option including
your first line
# Intel Corp.|82801BA/BAM/CA/CAM Ethernet Controller
DEVICE=eth0
BOOTPROTO=static
BROADCAST=XXX.XXX.XXX.XXX
HWADDR=XX:XX:XX:XX:XX:XX
IPADDR=XXX.XXX.XXX.XXX
NETMASK=XXX.XXX.XXX.XXX
NETWORK=XXX.XXX.XXX.XXX
ONBOOT=yes
TYPE=Ethernet
I understand that you have a laptop, if you have a pcmcia network-card
you must check if your card is support to linux because I have a laptop
whit a Allied Telesyn 2800TX pcmcia-card that is configured in the
/etc/sysconfig/netywork-script/ifcfg-eth0 and when I lunch the script
./network status everything is good but she doesn't work because she
isn't support whit the linux.
Bye Andrea
On Wed, 2004-07-21 at 14:16, Alberto M R Davila wrote:
> Hi Andrea,
>
> Yes, my ifconfig eth0 is fine and the network service is up... see below
> my log and dmesg... maybe it will help to debug ? Thanks a lot for your
> help.
>
>
> Alberto
>
> **********
>
> [root at tryps network-scripts]# ifconfig eth0
> eth0 Link encap:Ethernet HWaddr 00:00:39:DE:29:3F
> inet addr:XXX.XXX.XXX.XXX Bcast:XXX.XXX.XXX.XXX
> Mask:255.255.255.0
> inet6 addr: fe80::200:39ff:fede:293f/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 b) TX bytes:406 (406.0 b)
>
>
> [root at tryps network-scripts]# /etc/rc.c/init.d/network status
> bash: /etc/rc.c/init.d/network: No such file or directory
> [root at tryps network-scripts]# ls /etc/rc.c/init.d/network
> ls: /etc/rc.c/init.d/network: No such file or directory
> [root at tryps network-scripts]# ls /etc/rc.c/init.d/
> ls: /etc/rc.c/init.d/: No such file or directory
> [root at tryps network-scripts]# ls /etc/rc.c/init.d/
> ls: /etc/rc.c/init.d/: No such file or directory
> [root at tryps network-scripts]# cd /etc/rc.
> rc.d rc.local rc.sysinit
> [root at tryps network-scripts]# cd /etc/rc.d/
> [root at tryps rc.d]# ls
> init.d rc0.d rc2.d rc4.d rc6.d rc.sysinit
> rc rc1.d rc3.d rc5.d rc.local
> [root at tryps rc.d]# cd init.d/
> [root at tryps init.d]# ls
> acpid firstboot lisa nscd rpcidmapd tux
> aep1000 functions mdmonitor ntpd rpcsvcgssd
> vncserver
> anacron gpm mdmpd pcmcia saslauthd winbind
> apmd halt messagebus portmap sendmail xfs
> atd httpd microcode_ctl postgresql single xinetd
> autofs iptables named psacct smartd ypbind
> bcm5820 irda netdump random smb
> yppasswdd
> cpuspeed irqbalance netfs rawdevices snmpd ypserv
> crond isdn netplugd readahead snmptrapd ypxfrd
> cups kdcrotate network readahead_early squid yum
> dc_client killall nfs rhnsd sshd
> dc_server kudzu nfslock rpcgssd syslog
> [root at tryps init.d]# network status
> bash: network: command not found
> [root at tryps init.d]# ./network status
> Configured devices:
> lo eth0
> Currently active devices:
> lo eth0
More information about the fedora-list
mailing list