USB 2.0

[Michael Yep]

Hello All:

I installed a USB 2.0 controller in my server, it keeps printing this error

usb 1-3: device not accepting address 2, error -110

I have found many people with this problem on the web, but I haven't found 
any solutions

Any help would be apreciated.

here is lsmod

Module                  Size  Used by
edd                    13720  0
joydev                 14528  0
sg                     41632  0
st                     44828  0
sd_mod                 25088  0
sr_mod                 21028  0
scsi_mod              118340  4 sg,st,sd_mod,sr_mod
ide_cd                 42628  0
cdrom                  42652  2 sr_mod,ide_cd
nvram                  13448  0
usbserial              35952  0
parport_pc             41024  1
lp                     15364  0
parport                44232  2 parport_pc,lp
sworks_agp             13472  0
agpgart                36140  1 sworks_agp
ehci_hcd               33412  0
ohci_hcd               24324  0
ipv6                  276348  37
thermal                16648  0
processor              21312  1 thermal
fan                     8196  0
button                 10384  0
battery                12804  0
ac                      8964  0
tg3                    75396  0
usbcore               116700  5 usbserial,ehci_hcd,ohci_hcd
e100                   38400  0
mii                     9344  1 e100
evdev                  13952  0
subfs                  12160  2
reiserfs              263504  4
dm_snapshot            21536  0
dm_mod                 57472  7 dm_snapshot
raid1                  19712  2
ext3                  121384  2
jbd                    75172  1 ext3

Here is lspci

0000:00:00.0 Host bridge: ServerWorks GCNB-LE Host Bridge (rev 32)
0000:00:00.1 Host bridge: ServerWorks GCNB-LE Host Bridge
0000:00:01.0 USB Controller: NEC Corporation USB (rev 43)
0000:00:01.1 USB Controller: NEC Corporation USB (rev 43)
0000:00:01.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
0000:00:06.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:00:07.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] 
(rev 10)
0000:00:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702 
Gigabit Ethernet (rev 02)
0000:00:0f.0 Host bridge: ServerWorks CSB6 South Bridge (rev a0)
0000:00:0f.1 IDE interface: ServerWorks CSB6 RAID/IDE Controller (rev a0)
0000:00:0f.2 USB Controller: ServerWorks CSB6 OHCI USB Controller (rev 05)
0000:00:0f.3 ISA bridge: ServerWorks GCLE-2 Host Bridge


Following is a partial dmesg:


usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.5-7.95-smp ohci_hcd
usb usb1: SerialNumber: 0000:00:01.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:00:01.1: OHCI Host Controller
ohci_hcd 0000:00:01.1: irq 17, pci mem e1865000
ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 2
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.5-7.95-smp ohci_hcd
usb usb2: SerialNumber: 0000:00:01.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd 0000:00:0f.2: OHCI Host Controller
ohci_hcd 0000:00:0f.2: irq 10, pci mem e1867000
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 3
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.5-7.95-smp ohci_hcd
usb usb3: SerialNumber: 0000:00:0f.2
usb 1-3: new full speed USB device using address 2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci_hcd 0000:00:01.2: EHCI Host Controller
ehci_hcd 0000:00:01.2: irq 16, pci mem e13bcc00
ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:01.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.5-7.95-smp ehci_hcd
usb usb4: SerialNumber: 0000:00:01.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
Linux agpgart interface v0.100 (c) Dave Jones
usb 1-3: device not accepting address 2, error -110
usb 4-5: new high speed USB device using address 2
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
usb 4-5: control timeout on ep0out
Non-volatile memory driver v1.2
eth0: no IPv6 routers present
end_request: I/O error, dev fd0, sector 0
eth1: no IPv6 routers present
end_request: I/O error, dev fd0, sector 0
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
SCSI subsystem initialized
st: Version 20040318, fixed bufsize 32768, s/g segs 256
BIOS EDD facility v0.13 2004-Mar-09, 2 devices found
usb 4-5: control timeout on ep0out
usb 4-5: device not accepting address 2, error -110
usb 4-5: new high speed USB device using address 3
mtrr: type mismatch for fd000000,800000 old: uncachable new: write-combining
mtrr: type mismatch for fd000000,800000 old: uncachable new: write-combining
usb 4-5: control timeout on ep0out
usb 4-5: control timeout on ep0out
usb 4-5: device not accepting address 3, error -110


Michael Yep
Development / Technical Operations
RemoteLink, Inc.
(630) 983-0072 x164