USB CD-RW drive doesn't work FC2

Terry Polzin fox3ec208 at wideopenwest.com
Fri Jun 4 13:16:58 UTC 2004


This device worked fine under FC1,  SONY PCG-FX210 controller is USB1.1 device 
is 2.0. FC2 boot hangs while searching for new hardware, I have to initialize 
the CD-RW drive after boot.

THANKS,
Terry

Excerpt from /var/log/messages:

Jun  4 08:47:44 excaliber kernel: usb 1-1: new full speed USB device using 
address 2
Jun  4 08:47:45 excaliber kernel: Initializing USB Mass Storage driver...
Jun  4 08:50:26 excaliber kernel: usb 1-1: control timeout on ep0in


lsusb -v output:

Bus 002 Device 001: ID 0000:0000
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x0000
  idProduct          0x0000
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.5-1.358 uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:07.3
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x40
      Self Powered
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               none
          Usage Type               Data
        wMaxPacketSize     0x0002  bytes 2 once
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0xfe
  PortPwrCtrlMask    0x6a
  Language IDs: (length=4)
     0409 English(US)

Bus 001 Device 001: ID 0000:0000
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x0000
  idProduct          0x0000
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.5-1.358 uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:07.2
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x40
      Self Powered
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               none
          Usage Type               Data
        wMaxPacketSize     0x0002  bytes 2 once
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0xfe
  PortPwrCtrlMask    0x6a
  Language IDs: (length=4)
     0409 English(US)





More information about the fedora-list mailing list