Sound gone with recent gstreamer update on FC2
Mike Loiterman
mike at ascendency.net
Tue Jun 8 04:32:56 UTC 2004
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I just did an apt-get update and upgrade. I believe I saw a
gstreamer module in the list, which I believe is messing things up.
Anyway, my sound is gone now.
When I try to open the Volume Control App I get this error: "Sorry,
no mixer elements and/or devices found"
If I try to raise the sound with the task bar applet, it just jumps
back to the bottom.
[23:31:38 root at dell7000: ~]# rpm -qa | grep gstreamer
gstreamer-plugins-0.8.1-1
gstreamer-tools-0.8.3-0.fdr.1.2
gstreamer-0.8.3-0.fdr.1.2
Lsmod:
Module Size Used by
snd_pcm_oss 40740 0
snd_mixer_oss 13824 1 snd_pcm_oss
snd_es1968 22784 0
snd_ac97_codec 50436 1 snd_es1968
snd_pcm 68872 2 snd_pcm_oss,snd_es1968
snd_page_alloc 7940 2 snd_es1968,snd_pcm
snd_timer 17156 1 snd_pcm
gameport 3328 1 snd_es1968
snd_mpu401_uart 4864 1 snd_es1968
snd_rawmidi 17184 1 snd_mpu401_uart
snd_seq_device 6152 1 snd_rawmidi
snd 38372 9
snd_pcm_oss,snd_mixer_oss,snd_es1968,snd_ac97_codec,snd_pcm,snd_timer,
snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 6112 1 snd
cisco_ipsec 393484 0
parport_pc 19392 1
lp 8236 0
parport 29640 2 parport_pc,lp
autofs4 10624 0
orinoco_cs 6152 1
orinoco 31500 1 orinoco_cs
hermes 6528 2 orinoco_cs,orinoco
ds 12292 5 orinoco_cs
yenta_socket 15104 1
pcmcia_core 46792 3 orinoco_cs,ds,yenta_socket
sunrpc 101064 1
ipt_REJECT 4736 1
ipt_state 1536 1
ip_conntrack 24968 1 ipt_state
iptable_filter 2048 1
ip_tables 13440 3 ipt_REJECT,ipt_state,iptable_filter
floppy 47440 0
sg 27552 0
scsi_mod 91344 1 sg
microcode 4768 0
dm_mod 33184 0
uhci_hcd 23708 0
ipv6 184288 10
ext3 102376 2
jbd 40216 1 ext3
Dmesg:
Linux version 2.6.5-1.358 (bhcompile at bugs.build.redhat.com) (gcc
version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Sat May 8 09:04:50
EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000eb800 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000014000000 (usable)
BIOS-e820: 00000000fffeb800 - 0000000100000000 (reserved)
0MB HIGHMEM available.
320MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 81920
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 77824 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI not present.
ACPI: Unable to locate RSDP
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb
mapped 4G/4G trampoline to ffff3000.
Initializing CPU#0
CPU 0 irqstacks, hard=02345000 soft=02344000
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 300.204 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 321444k/327680k available (1540k kernel code, 5460k reserved,
599k data, 144k init, 0k highmem)
Calibrating delay loop... 589.82 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security
failed.
Failure registering capabilities with the kernel
selinux_register_security: Registering secondary module capability
Capability LSM initialized
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183f9ff 00000000 00000000
00000000
CPU: After vendor identify, caps: 0183f9ff 00000000 00000000
00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0183f1ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium II (Deschutes) stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd9d3, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
PCI: IRQ 0 for device 0000:00:04.0 doesn't match PIRQ mask - try
pci=usepirqmask
PCI: Found IRQ 11 for device 0000:00:04.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: IRQ 0 for device 0000:00:04.1 doesn't match PIRQ mask - try
pci=usepirqmask
PCI: Found IRQ 11 for device 0000:00:04.1
PCI: Sharing IRQ 11 with 0000:00:03.0
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1086649025.4294965553:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 263M
agpgart: AGP aperture is 64M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing
enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024
blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfcd0-0xfcd7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfcd8-0xfcdf, BIOS settings: hdc:DMA, hdd:pio
hda: ST92011A, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: MATSHITADVD-ROM SR-8171, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=16383/255/63,
UDMA(33)
hda: hda1 hda2 hda3
hdc: ATAPI 20X DVD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
Synaptics Touchpad, model: 1
Firmware: 4.3
180 degree mounted touchpad
Sensor: 8
new absolute packet format
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
checking if image is initramfs...it isn't (no cpio magic); looks like
an initrd
Freeing initrd memory: 186k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 144k freed
NET: Registered protocol family 10
Disabled Privacy Extensions on device 022db720(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 11 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 11, io base 0000fce0
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: over-current change on port 2
EXT3 FS on hda2, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised:
dm at uk.sistina.com
hdc: packet command error: status=0x51 { DriveReady SeekComplete
Error }
hdc: packet command error: error=0x50
cdrom: open failed.
Adding 650624k swap on /dev/hda3. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
IA-32 Microcode Update Driver: v1.13 <tigran at veritas.com>
microcode: CPU0 updated from revision 0x15 to 0x2d, date = 05181999
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
SCSI subsystem initialized
inserting floppy driver for 2.6.5-1.358
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (2560 buckets, 20480 max) - 296 bytes per
conntrack
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 0000:00:04.0
PCI: Sharing IRQ 11 with 0000:01:00.0
Yenta: CardBus bridge found at 0000:00:04.0 [1028:0085]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:04.0, mfunc 0x01021c12, devctl 0x66
Yenta: ISA IRQ mask 0x0698, PCI irq 11
Socket status: 30000059
PCI: Found IRQ 11 for device 0000:00:04.1
PCI: Sharing IRQ 11 with 0000:00:03.0
Yenta: CardBus bridge found at 0000:00:04.1 [1028:0085]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:04.1, mfunc 0x01021c12, devctl 0x66
Yenta: ISA IRQ mask 0x0698, PCI irq 11
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
orinoco.c 0.13e (David Gibson <hermes at gibson.dropbear.id.au> and
others)
orinoco_cs.c 0.13e (David Gibson <hermes at gibson.dropbear.id.au> and
others)
divert: allocating divert_blk for eth0
eth0: Station identity 001f:0002:0001:0004
eth0: Looks like an Intersil firmware version 1.4.2
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:06:25:15:FD:96
eth0: Station name "Prism I"
eth0: ready
eth0: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
eth0: Error -110 setting multicast list.
eth0: Error -110 setting multicast list.
eth0: Error -110 setting multicast list.
eth0: New link status: Connected (0001)
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
eth0: no IPv6 routers present
cisco_ipsec: module license 'Proprietary' taints kernel.
divert: not allocating divert_blk for non-ethernet device cipsec0
Cisco Systems VPN Client Version 4.0.4 (A) kernel module loaded
PCI: Found IRQ 5 for device 0000:00:08.0
es1968: not attempting power management.
es1968: clocking to 48000
spurious 8259A interrupt: IRQ7.
- ------------------------------
Mike Loiterman
grantADLER
Tel: 630-302-4944
Fax: 773-442-0992
Email: mike at ascendency.net
PGP Key 0xD1B9D18E
GPG Key 0x661D0518
-----BEGIN PGP SIGNATURE-----
Version: PGP 8.0.3
Comment: Digitally signed by Mike Loiterman
iQA/AwUBQMVBd2jZbUnRudGOEQLurQCg3fwmNUNrAHMAVT+bBe0YNvbsp0MAoJWJ
NOIE9kQPxKOFDXVutClRu7e6
=LY6n
-----END PGP SIGNATURE-----
More information about the fedora-list
mailing list