Flyvideo 3000 capturing board

[Fons van der Beek]

> > Hello all
> >
> > Does anybody use a FlyVideo 3000 (PAL B) PC-TV  capture board in Fedora
core
> > 2?
> > if so, and if its functioning, would you be so kind to mail the
> > modules.conf, modprobe.conf.
> >
> > I got it working at start, but it isn't functioning anymore after i
modified
> > the modules.conf or modprobe.conf.
> > I would also be muched oblieged for a howto on installing this board for
a
> > 2.6 kernel.
>
> I have the same card, nothing special to setup. My old Flyvideo98/FM
> used the bttv module but the newer ones use this saa7134 module.
>
> If it is not already in your /etc/modprobe.conf then you need the
> following line.
>
>  alias char-major-81 saa7134

> I left it auto-detect the card & tuner and everything works just fine.
> Uee tvtime to watch TV without a hitch.
>
>
> PS. /etc/modules.conf was used by the 2.4 kernels, you can remove that
> if you only use 2.6.


Hello, mine looks like this, it detects ok, but no capturing, allthough it
worked before
and frequent kernel-panics:

alias parport_lowlevel parport_pc
alias eth0 8139too
alias usb-controller usb-uhci
alias usb-controller1 ehci-hcd
alias char-major-61-* lirc_serial
alias usb-controller ehci-hcd
alias usb-controller2 uhci-hcd
alias char-major-108-* ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
alias char-major-116-* snd
alias snd-card-0 snd-intel8x0
options snd major=116 cards_limit=1
options snd-intel8x0 index=0 id="ICH"
alias char-major-14-* soundcore
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias ppp-compress-18 ppp_mppe
alias net-pf-10 ipv6
alias char-major-81 saa7134
install pwc /sbin/modprobe --first-time --ignore-install pwc && {
/sbin//sbin/modprobe --ignore-install --force
/deamons/pwcx-8.2-gcc32/pwcx-gcc32.o >/dev/null 2>&1 || :; }
install snd-card-0 /sbin/modprobe --first-time --ignore-install snd-card-0
&& { /usr/sbin/alsactl restore >/dev/null 2>&1 || :; }
install usb-controller /sbin/modprobe --first-time --ignore-install
usb-controller && { modprobe printer; }
install usb-controller1 /sbin/modprobe --first-time --ignore-install
usb-controller1 && { modprobe printer; }
remove snd-card-0 { /usr/sbin/alsactl store >/dev/null 2>&1 || :; } ;
/sbin/modprobe -r --first-time --ignore-remove snd-card-0