[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Help with 8-in-1 card reader



I've got a Belkin 8-in-1 card reader I'm trying to get working with FC1. I have an external USB disk drive and a USB digital camera working, so I think my usb-storage system is working. I made the max_scsi_luns mods to grub.conf and modules.conf recommended in the FedoraNEWS.org tip #44. I get a lot of messages in the message log, but none that suggest the system is seeing the SmartMedia card in the reader. Could someone offer some suggestions on what I'm doing wrong or offer suggestions on how I might figure out what I'm doing wrong?

Thanks! What I hope is pertinent information is included below.

Andrew Robinson

grub.conf:

title Fedora Core (2.4.22-1.2174.nptl-awr1)
  root (hd0,9)
kernel /boot/vmlinuz-2.4.22-1.2174.nptl-awr1 ro root=LABEL=/12 hdc=ide-scsi hdd=ide-scsi max_scsi_luns=8 rhgb quiet
  initrd /boot/initrd-2.4.22-1.2174.nptl-awr1.img

modules.conf:

add options scsi_mod max_scsi_luns=8

/var/log/messages:

kernel: hub.c: new USB device 00:02.2-2.4, assigned address 9
kernel: usb.c: USB device 9 (vend/prod 0x50d/0x248) is not claimed by any active driver.
kernel: Initializing USB Mass Storage driver...
kernel: usb.c: registered new driver usb-storage
kernel: scsi3 : SCSI emulation for USB Mass Storage devices
kernel:   Vendor: BELKIN    Model: USB 2 HS-CF       Rev: 1.63
kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
kernel: Attached scsi removable disk sda at scsi3, channel 0, id 0, lun 0
kernel: sda: Unit Not Ready, sense:
kernel: Current 00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : READ CAPACITY failed.
kernel: sda : status = 1, message = 00, host = 0, driver = 08
kernel: Current sd00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
kernel:  sda: I/O error: dev 08:00, sector 0
kernel:  I/O error: dev 08:00, sector 0
kernel:  unable to read partition table
kernel: USB Mass Storage support registered.
kernel: sda: Unit Not Ready, sense:
kernel: Current 00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : READ CAPACITY failed.
kernel: sda : status = 1, message = 00, host = 0, driver = 08
kernel: Current sd00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
kernel: sda: test WP failed, assume Write Enabled
kernel:  sda: I/O error: dev 08:00, sector 0
kernel:  I/O error: dev 08:00, sector 0
kernel:  unable to read partition table
kernel: Device not ready.  Make sure there is a disc in the drive.
kernel: Device not ready.  Make sure there is a disc in the drive.
updfstab.wrapper[6536]: No changes to be made
kernel: sda: Unit Not Ready, sense:
kernel: Current 00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : READ CAPACITY failed.
kernel: sda : status = 1, message = 00, host = 0, driver = 08
kernel: Current sd00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
kernel: sda: test WP failed, assume Write Enabled
kernel:  sda: I/O error: dev 08:00, sector 0
kernel:  I/O error: dev 08:00, sector 0
kernel:  unable to read partition table
kernel: Device not ready.  Make sure there is a disc in the drive.
kernel: Device not ready.  Make sure there is a disc in the drive.
kernel: sda: Unit Not Ready, sense:
kernel: Current 00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : READ CAPACITY failed.
kernel: sda : status = 1, message = 00, host = 0, driver = 08
kernel: Current sd00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
kernel: sda: test WP failed, assume Write Enabled
kernel:  sda: I/O error: dev 08:00, sector 0
kernel:  I/O error: dev 08:00, sector 0
kernel:  unable to read partition table
kernel: Device not ready.  Make sure there is a disc in the drive.
kernel: Device not ready.  Make sure there is a disc in the drive.
devlabel: devlabel service started/restarted





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]