Help with 8-in-1 card reader

[Andrew Robinson]

Cesar Cardoso wrote:
> The modules.conf line should be
> 
> options scsi_mod max_scsi_luns=8
> 
> 
> On Fri, 04 Jun 2004 20:04:12 -0500, Andrew Robinson <awrobinson at cox.net> wrote:
> 
>>modules.conf:
>>
>>add options scsi_mod max_scsi_luns=8
>>

According to the modules.conf man page, "add options ..." and "options 
..." are equivalent. In any case, I tried both and got the same results.

Now, I'm not sure exactly what I _should_ be seeing in the message log 
for the 8-in-1 card reader, but I don't see anything referring to the 
Smart Media card sitting in the reader. I know from installing this on 
Windoze that the Compact Flash slot is the first LUN, but I don't have a 
Compact Flash card to play with.

So again I ask if anyone has a suggestion on what I'm doing wrong or how 
I can figure out what I'm doing wrong.

Thanks!

Andrew Robinson

Message log:

kernel: hub.c: new USB device 00:02.2-2.4, assigned address 5
kernel: scsi4 : SCSI emulation for USB Mass Storage devices
kernel:   Vendor: BELKIN    Model: USB 2 HS-CF       Rev: 1.63
kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
kernel: Attached scsi removable disk sdb at scsi4, channel 0, id 0, lun 0
kernel: sdb: Unit Not Ready, sense:
kernel: Current 00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sdb : READ CAPACITY failed.
kernel: sdb : status = 1, message = 00, host = 0, driver = 08
kernel: Current sd00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sdb : block size assumed to be 512 bytes, disk size 1GB.
kernel:  sdb: I/O error: dev 08:10, sector 0
kernel:  I/O error: dev 08:10, sector 0
kernel:  unable to read partition table
usb.agent[6001]: missing kernel or user mode driver usb-storage
kernel: sdb: Unit Not Ready, sense:
kernel: Current 00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sdb : READ CAPACITY failed.
kernel: sdb : status = 1, message = 00, host = 0, driver = 08
kernel: Current sd00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sdb : block size assumed to be 512 bytes, disk size 1GB.
kernel: sdb: test WP failed, assume Write Enabled
kernel:  sdb: I/O error: dev 08:10, sector 0
kernel:  I/O error: dev 08:10, sector 0
kernel:  unable to read partition table
kernel: Device not ready.  Make sure there is a disc in the drive.
kernel: Device not ready.  Make sure there is a disc in the drive.
updfstab.wrapper[6027]: No changes to be made
kernel: sdb: Unit Not Ready, sense:
kernel: Current 00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sdb : READ CAPACITY failed.
kernel: sdb : status = 1, message = 00, host = 0, driver = 08
kernel: Current sd00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sdb : block size assumed to be 512 bytes, disk size 1GB.
kernel: sdb: test WP failed, assume Write Enabled
kernel:  sdb: I/O error: dev 08:10, sector 0
kernel:  I/O error: dev 08:10, sector 0
kernel:  unable to read partition table
kernel: Device not ready.  Make sure there is a disc in the drive.
kernel: Device not ready.  Make sure there is a disc in the drive.
kernel: sdb: Unit Not Ready, sense:
kernel: Current 00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sdb : READ CAPACITY failed.
kernel: sdb : status = 1, message = 00, host = 0, driver = 08
kernel: Current sd00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sdb : block size assumed to be 512 bytes, disk size 1GB.
kernel: sdb: test WP failed, assume Write Enabled
kernel:  sdb: I/O error: dev 08:10, sector 0
kernel:  I/O error: dev 08:10, sector 0
kernel:  unable to read partition table
kernel: Device not ready.  Make sure there is a disc in the drive.
kernel: Device not ready.  Make sure there is a disc in the drive.
devlabel: devlabel service started/restarted