[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Trouble burning CDs on an NEC 1300a



On Mon, Jun 07, 2004 at 18:21:57 +0200,
  Alexander Dalloz <alexander dalloz uni-bielefeld de> wrote:
> Am Mo, den 07.06.2004 schrieb Bruno Wolff III um 18:13:
> 
> > I am not sure if I am looking at a kernel problem, a cdrecord problem,
> > a drive problem or a configuration problem (e.g. using ide-scsi).
> 
> See the FC2 release notes:
> 
> http://download.fedora.redhat.com/pub/fedora/linux/core/2/i386/os/RELEASE-NOTES-en.html

OK. I think when I tried k3b I had already been using /dev/hdd, but for
cdroast I was using scan devices and it wasn't showing that name for
the DVD drives so I hadn't been using them. I tried again using cdroast
writing to /dev/hdd and still had problems.

> Be sure, you have no ide-scsi parameter in the kernel line in
> /etc/grub.conf.

I had tried that as part of trying possible solutions to the problem,
but I am not using ide-scsi boot parameters now or for the previous
sample.

I was able to (apparantly) blank a CDRW disc successfully. But when I tried
writing audio data to the drive things didn't work. Maybe I need to be
using a different mode for something to get things to work with this
particular type of drive.

Here is the latest cdrecord.out file from the failed attempt:

Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "/dev/hdd" gracetime=2 fs=4096k driveropts=burnfree -v -useinfo speed=4 -dao -eject -pad -audio "/tmp/.CD/track-01.wav" ...

scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.80-RH '@(#)scsi-linux-sg.c	1.80 04/03/08 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly mandrakesoft com>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : '_NEC    '
Identifikation : 'DVD_RW ND-1300A '
Revision       : '1.0A'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x001B
Profile: 0x001A
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A (current)
Profile: 0x0009
Profile: 0x0008 (current)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 1345536 = 1314 KB
FIFO size      : 4194304 = 4096 KB
pregap1: -1
Track 01: audio   39 MB (03:55.02) no preemp
Track 02: audio   29 MB (02:55.04) no preemp
Track 03: audio   35 MB (03:32.96) no preemp
Track 04: audio   40 MB (04:00.64) no preemp
Track 05: audio   28 MB (02:48.13) no preemp
Track 06: audio   32 MB (03:14.06) no preemp
Track 07: audio   36 MB (03:34.33) no preemp
Track 08: audio   42 MB (04:14.93) no preemp
Track 09: audio   31 MB (03:05.42) no preemp
Track 10: audio   38 MB (03:49.10) no preemp
Track 11: audio   20 MB (02:03.00) no preemp
Track 12: audio   43 MB (04:20.26) no preemp
Track 13: audio   60 MB (05:57.40) no preemp
Track 14: audio   46 MB (04:33.93) no preemp
Track 15: audio   27 MB (02:42.73) no preemp
Track 16: audio   50 MB (05:02.20) no preemp
Track 17: audio   74 MB (07:20.80) no preemp
Track 18: audio   43 MB (04:17.76) no preemp
Total size:      721 MB (71:27.76) = 321582 sectors
Lout start:      721 MB (71:29/57) = 321582 sectors
Current
Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in:  -11635 (97:26/65)
ATIP start of lead out: 337350 (75:00/00)
1T speed low:  0 (reserved val  0) 1T speed high:  4
2T speed low:  8 2T speed high:  0 (reserved val 10)
power mult factor: 4 6
recommended erase/write power: 3
A1 values: 02 4C B0
A2 values: 4A C8 06
Disk type:    Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 337350 Blocks current: 337350 Blocks remaining: 15768
Starting to write CD/DVD at speed   4.0 in real SAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
cdrecord: Success. write_g1: scsi sendcmd: no error
write track pad data: error after 0 bytes
CDB:  2A 00 FF FF FF 6A 00 00 1B 00
Starting new track at sector: 0
status: 0x4 (CONDITION MET/GOOD)
resid: 63504
cmd finished after 200.220s timeout 200s
cdrecord: Success. read buffer cap: scsi sendcmd: no error
CDB:  5C 00 00 00 00 00 00 00 0C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 12
cmd finished after 0.001s timeout 200s
cdrecord: Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63504
cmd finished after 0.000s timeout 200s
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.

cdrecord: Success. test unit ready: scsi sendcmd: no error
write track data: error after 0 bytes
CDB:  00 00 00 00 00 00
Writing  time:  207.694s
status: 0x2 (CHECK CONDITION)
Average write speed   2.3x.
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80
Fixating...
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid) operation 0% done
cmd finished after 0.009s timeout 200s
cdrecord: Success. flush cache: scsi sendcmd: no error
CDB:  35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid) operation 0% done
cmd finished after 0.000s timeout 200s
Trouble flushing the cache
Fixating time:   13.069s
BURN-Free was never needed.
cdrecord: fifo had 64 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]