help me epson CX3200

[Giuseppe Di Bona]

Don't work for me.

Thanks.


Il mer, 2004-06-09 alle 18:17, Peter Silcock ha scritto:
> Edit the file "/etc/sane.d/epson.conf" as follows: add a line containing
> 
> usb
> 
> on its own.  Alternatively, add a # at the beginning of this line:
> 
> scsi EPSON
> 
> and remove the # at the beginning of  the line
> 
> #usb /dev/usb/scanner0
> 
> There's more info at 
> http://www.linuxprinting.org/show_printer.cgi?recnum=Epson-Stylus_CX3200
> 
> Peter Silcock
> 
> 
> gdbnet at aliceposta.it wrote:
> 
> >Hi to all,
> >
> >I've just buy an Epson CX3200 multifunction printer.
> >I choosed this one because linuxprinting.org say it's supported, the
> >same xsane.org.
> >
> >Printing it's OK but i cannot use the scanner.
> >
> >Here some message from console:
> >
> >-----------------------------------------------
> >sane-find-scanner
> > 
> ># No SCSI scanners found. If you expected something different, make sure
> >that
> ># you have loaded a SCSI driver for your SCSI adapter.
> > 
> >found USB scanner (vendor=0x05a9 [OmniVision Technologies, Inc.],
> >product=0x0518 [USB Camera]) at libusb:001:003
> >found USB scanner (vendor=0x04b8 [EPSON], product=0x0802 [USB MFP]) at
> >libusb:001:002
> ># Your USB scanner was (probably) detected. It may or may not be
> >supported by
> ># SANE. Try scanimage -L and read the backend's manpage.
> > 
> ># Scanners connected to the parallel port or other proprietary ports
> >can't be
> ># detected by this program.
> >-----------------------------------------------
> >
> >scanimage -L
> > 
> >No scanners were identified. If you were expecting something different,
> >check that the scanner is plugged in, turned on and detected by the
> >sane-find-scanner tool (if appropriate). Please read the documentation
> >which came with this software (README, FAQ, manpages).
> >-----------------------------------------------
> >
> >xsane tell me there's no scanner.
> >
> >I use FC2.
> >
> >Thanks.
> >
> >
> >  
> >
>