[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Flyvideo 3000 capturing board



> Fons van der Beek said the following on 09/06/2004 19:17:
> >>>Hello all
> >>>
> >>>Does anybody use a FlyVideo 3000 (PAL B) PC-TV  capture board in Fedora
>
> <snip>
>
> > Hello, mine looks like this, it detects ok, but no capturing, allthough
it
> > worked before
> > and frequent kernel-panics:
>
> Before where? FC1?

On Fedora C2, just by plugging in, after that I changed something in the
configuration of Core 2
unfortunatly I don't know what...

>
> > alias parport_lowlevel parport_pc
> > alias eth0 8139too
> > alias usb-controller usb-uhci
> > alias usb-controller1 ehci-hcd
> > alias char-major-61-* lirc_serial
> > alias usb-controller ehci-hcd
> > alias usb-controller2 uhci-hcd
> > alias char-major-108-* ppp_generic
> > alias /dev/ppp ppp_generic
> > alias tty-ldisc-3 ppp_async
> > alias tty-ldisc-14 ppp_synctty
> > alias ppp-compress-21 bsd_comp
> > alias ppp-compress-24 ppp_deflate
> > alias ppp-compress-26 ppp_deflate
> > alias char-major-116-* snd
> > alias snd-card-0 snd-intel8x0
> > options snd major=116 cards_limit=1
> > options snd-intel8x0 index=0 id="ICH"
> > alias char-major-14-* soundcore
> > alias sound-service-0-0 snd-mixer-oss
> > alias sound-service-0-1 snd-seq-oss
> > alias sound-service-0-3 snd-pcm-oss
> > alias sound-service-0-8 snd-seq-oss
> > alias sound-service-0-12 snd-pcm-oss
> > alias ppp-compress-18 ppp_mppe
> > alias net-pf-10 ipv6
> > alias char-major-81 saa7134
> > install pwc /sbin/modprobe --first-time --ignore-install pwc && {
> > /sbin//sbin/modprobe --ignore-install --force
> > /deamons/pwcx-8.2-gcc32/pwcx-gcc32.o >/dev/null 2>&1 || :; }
> > install snd-card-0 /sbin/modprobe --first-time --ignore-install
snd-card-0
> > && { /usr/sbin/alsactl restore >/dev/null 2>&1 || :; }
> > install usb-controller /sbin/modprobe --first-time --ignore-install
> > usb-controller && { modprobe printer; }
> > install usb-controller1 /sbin/modprobe --first-time --ignore-install
> > usb-controller1 && { modprobe printer; }
> > remove snd-card-0 { /usr/sbin/alsactl store >/dev/null 2>&1 || :; } ;
> > /sbin/modprobe -r --first-time --ignore-remove snd-card-0
>
> I would disable the pwc module and test to see wether you still have
> problems.
>
> PS. you can trim down your /etc/modprobe.conf file alot by removing
> alias's that are already present in /etc/modprobe.conf.dist
>
> --
> Greg

I've tried it, still no luck............

I've upgrade my system from Redhat 8 to Fedora Core 2, applying the Nvidia
8k kernel.
I had some trubbles on Redhat 8 (gtk2+, freefont) and I needed lm_sensors
and the capturing card working together
so upgrading to Fedora core 2 seemed the right solution, but afterwards i
can say that upgrading a (little bit ) trubblesome Redhat 8.0 system into
Fedora Core 2 wasn't  that wise at all (Shit in -> Shit out )

I Guess rebuilding  the system with Fedora core 2 from scratch is gone save
me (and you) a lot of time....

With kind regards
Fons van der Beek



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]