[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: ip Routing Through Cluster



On Fri, Jun 11, 2004 at 05:54:54AM -0400, gswallow cfl rr com wrote:

> 

> Am successfully bonding two dual PII266 machines via crossover
> cables to make a workstation out of the hardware I have 'round the
> house. node1 and node2 on network.com (192.168.2.0) can ping between
> eachother just fine on each machine's bond0 NIC
> (192.168.2.1/192.168.2.2 node1/node2). eth0 and eth1 in each machine
> are SLAVE of bond0 device.
....

> node1 can access internet fine...
....

> What amm I getting wrong here? And, please let me know if ya need more infor.

Remember that private internets are not routed!

  # The Internet Assigned Numbers Authority (IANA) has reserved the
  #    following three blocks of the IP address space for private internets:
  #
  #       10.0.0.0        - 10.255.255.255  (10/8 prefix)
  #       172.16.0.0      - 172.31.255.255  (172.16/12 prefix)
  #       192.168.0.0     - 192.168.255.255 (192.168/16 prefix)

What this means is that there should never be a published route
between net 192.168.2.xx and your 192.168.1.xx net (or any other
private internet).

Host routes and gateway hosts may solve the problem.  Check the man
page for route I see some examples at this URL that look close

   http://www.cpqlinux.com/routes.html

Note the gw (gateway) 

    Adding and Removing a Network in Linux

    route add -net 10.10.10.0/24 gw 192.168.0.1
    route del -net 10.10.10.0/24 gw 192.168.0.1

    Adding and Removing a specific host in Linux

    route add -host 10.10.10.45 gw 192.168.0.1
    route del -host 10.10.10.45 gw 192.168.0.1

See /etc/sysconfig/static-routes 

This URL may have hints...

  http://www.comptechdoc.org/os/linux/usersguide/linux_ugrouting.html

Note that the DHCP server must communicate the correct routes if DHCP
is used.  Both directions need routes and in some cases routing more
than one private network is impossible.

Some tricks like FIREWALL_IP translation might help.
   http://projectfiles.com/firewall/isp.htm

See also bridging and proxy arp....
See  /etc/gateways  if a dynamic routed is active.


The key is that private nets are not routed and very special actions
are needed to get to and from the Internet from the second private
net.
   
    "private <--> public" 
is common and easy

    "private <--> private <--> public" 
is trouble.

I also note that you have IPV6 networking active -- you might wish to
turn that off and simplify your task.  Eventually IPV6 will simplify
this stuff.

-- 
	T o m  M i t c h e l l 
	/dev/null the ultimate in secure storage.




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]