[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Cannot burn disk 3 of Fedore Core 2

I have downloaded from two separate sites disk 3 of the 4 set Fedore Core 2.  I have tried four times, using 2 different types of CDs, to burn disk 3 to CD and have failed with a write error as described below.

/home/cgar/perm/inssu cdrecord -v speed=52 dev=0,0,0 -data FC2-i386-disc3.iso
Cdrecord-Clone 2.01a19 (i686-redhat-linux-gnu)
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.75-RH '@(#)scsi-linux-sg.c        1.75 02/10/21 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'ARTEC   '
Identifikation : 'WRR-52Z         '
Revision       : '1.25'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1359872 = 1328 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data   638 MB
Total size:      732 MB (72:35.60) = 326670 sectors
Lout start:      733 MB (72:37/45) = 326670 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11634 (97:26/66)
  ATIP start of lead out: 359846 (79:59/71)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 33176
Forcespeed is OFF.
Starting to write CD/DVD at speed 48 in real TAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
Starting new track at sector: 0
Track 01:  211 of  638 MB written (fifo  95%) [buf   2%]  33.3x.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 01 A6 03 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 05 00 01 A6 0B 0C 00 00 00 00 10 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x10 Qual 0x02 (id crc or ecc error) [No matching qualifier] Fru 0x0Sense flags: Blk 108043 (valid)
cmd finished after 0.015s timeout 40s

write track data: error after 221255680 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
Writing  time:   64.839s
Average write speed  76.1x.
Min drive buffer fill was 2%
Total of 1 possible drive buffer underruns predicted.
Fixating time:   15.748s
cdrecord: fifo had 3549 puts and 3486 gets.
cdrecord: fifo was 0 times empty and 1261 times full, min fill was 14%.

Clair Garman     301-270-2248   Takoma Park, MD

The remarkable thing about my mother is that for thirty years she served
us nothing but leftovers. The original meal has never been found.

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]