Handspring Treo300 vs FC2
Greg Swallow
gswallow at cfl.rr.com
Fri Jun 25 10:39:37 UTC 2004
/dev/pilot is the default device that Gnome Pilot Settings comes up with
when I start it from Evolution. I was assuming there is no matter since
one must also select the port (serial/USB/IrDA/Network).
There was something about ttyUSB0 and ttyUSB1 in the archive to 'chmod
666' each of these devices, but this seems to have made no difference.
There is no /dev/pilot, but I do have /dev/pda and several /dev/pda#,
but not luck using /dev/pda or /dev/pda1; there is no /dev/pda0.
Need to get synced pretty bad. iMac HD just took a nose dive and am not
going to the Windows 'GAME' computer for this.
Thanks for your support,
GregS <><
gswallow at cfl.rr.com
On Fri, 2004-06-25 at 06:23, Bob Chiodini wrote:
> On Fri, 2004-06-25 at 06:08, Greg Swallow wrote:
> > Use the hardware browser and find a System Device of Handpsring Visor.
> > It's really a Treo300, but the System Device pops in/out as I have the
> > Treo attached to the USB port. So FC2 sees the Treo, but Gnome Pilot
> > Settings seems to not be finding it.
> >
> > Trying to get an initial hot-sync with settings at:
> >
> > Cradle Settings:
> >
> > Name: Treo
> > Port: /dev/pilot
> > Speed: 57600
> > Timeout: 2
> > Type: [ ]Serial [x]USB [ ]IrDA [ ]Network
> >
> > [x]Yes, used sync software before...
> >
> > Still searching archive, but haven't found anything helpful yet.
> >
> > Thanks for your support,
> >
> > GregS <><
> gswallow at cfl.rr.com
>
> Greg,
>
> What does /dev/pilot point to? IIRC it should be /dev/usb/ttyUSB0 or
> ttyUSB1.
>
> Bob...
More information about the fedora-list
mailing list