[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

I865 Sound Problem



I recently got a Dell Dimension 8600 and installed Fedora Core 2 on it. 
The 8600 is based on the Intel 865 chipset with apparently integrated
graphics, audio, and network controller.  After struggling with some
video issues, it mostly runs wonderfully.  However, I've never been able
to make sound work in Fedora Core 2.  The system is a dual-boot and
sound is fine under Windows XP, so the hardware seems to be good.  It
seems like the hardware is supported, and there are no error messages
that I can find.

I've tried googling and found people with similar problems, but no one
with a documented solution.  It seems like it might be related to
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=123631 but the
solutions there have not worked for me.  Adding any value for ac97_quirk
doesn't seem to change things at all.  I've turned up the volume on
every mixer control I can find.  More detailed information is below.  I
appreciate any suggestions.  Let me know if more info would be helpful
in diagnosing the problem.

system-config-soundcard reports:

Vendor: Intel
Model: 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller
Module: snd-intel8x0

Playing the test sound results in no sound.  The following is displayed
in the terminal:

Simple mixer control 'PCM',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Front Left: Playback 23 [74%] [on]
  Front Right: Playback 23 [74%] [on]
-9

Kudzu will add the following to /etc/modules.conf if allowed to
configure the soundcard:

alias snd-card-0 snd-intel8x0
install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 &&
/usr/sbin/alsactl restore >/dev/null 2>&1 || :
remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
/sbin/modprobe -r --ignore-remove snd-intel8x0

Which also produces no sound.

/proc/asound/cards has:

0 [ICH5           ]: ICH - Intel ICH5
                     Intel ICH5 at 0xfeb7fa00, irq 3

The sound modules seem to be installed fine and lsmod reports:

Module                  Size  Used by
snd_pcm_oss            41000  0
snd_mixer_oss          13824  2 snd_pcm_oss
snd_intel8x0           26796  2
snd_ac97_codec         54788  1 snd_intel8x0
snd_pcm                69256  2 snd_pcm_oss,snd_intel8x0
snd_timer              17284  1 snd_pcm
snd_page_alloc          8072  2 snd_intel8x0,snd_pcm
gameport                3328  1 snd_intel8x0
snd_mpu401_uart         4864  1 snd_intel8x0
snd_rawmidi            17444  1 snd_mpu401_uart
snd_seq_device          6152  1 snd_rawmidi
snd                    39396  11
snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
loop                   10760  0
soundcore               6112  2 snd
parport_pc             19392  1
lp                      8236  0
parport                29640  2 parport_pc,lp
autofs4                12932  0
sunrpc                109924  1
e100                   25348  0
mii                     3584  1 e100
ipt_REJECT              4736  1
ipt_state               1536  2
ip_conntrack           24968  1 ipt_state
iptable_filter          2176  1
ip_tables              13568  3 ipt_REJECT,ipt_state,iptable_filter
floppy                 47440  0
sg                     27680  0
microcode               4768  0
dm_mod                 32800  0
usblp                   9472  1
usb_storage            53576  0
uhci_hcd               24472  0
ehci_hcd               22916  0
button                  4632  0
battery                 6924  0
asus_acpi               8984  0
ac                      3340  0
ipv6                  184672  10
ext3                  103656  2
jbd                    40728  1 ext3
ata_piix                5380  0
libata                 29188  1 ata_piix
sd_mod                 16384  0
scsi_mod               91984  4 sg,usb_storage,libata,sd_mod

lspci -vv output is:

00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
	Subsystem: Dell Computer Corporation: Unknown device 0174
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort+ >SERR- <PERR-
	Latency: 0
	Region 0: Memory at f0000000 (32-bit, prefetchable)
	Capabilities: [e4] #09 [0106]

00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics Device (rev 02) (prog-if 00 [VGA])
	Subsystem: Dell Computer Corporation: Unknown device 0174
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e8000000 (32-bit, prefetchable)
	Region 1: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
	Region 2: I/O ports at ed98 [size=8]
	Capabilities: [d0] Power Management version 1
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Computer Corporation: Unknown device 0174
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 4: I/O ports at ff80 [size=32]

00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Computer Corporation: Unknown device 0174
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 10
	Region 4: I/O ports at ff60 [size=32]

00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Computer Corporation: Unknown device 0174
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 9
	Region 4: I/O ports at ff40 [size=32]

00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Computer Corporation: Unknown device 0174
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 4: I/O ports at ff20 [size=32]

00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
	Subsystem: Dell Computer Corporation: Unknown device 0174
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin D routed to IRQ 5
	Region 0: Memory at ffa80800 (32-bit, non-prefetchable)
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] #0a [20a0]

00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev c2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fea00000-feafffff
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: Dell Computer Corporation: Unknown device 0174
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 9
	Region 0: I/O ports at <ignored>
	Region 1: I/O ports at <ignored>
	Region 2: I/O ports at <ignored>
	Region 3: I/O ports at <ignored>
	Region 4: I/O ports at ffa0 [size=16]
	Region 5: Memory at feb7fc00 (32-bit, non-prefetchable) [size=1K]

00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Dell Computer Corporation: Unknown device 0174
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 9
	Region 0: I/O ports at fe00
	Region 1: I/O ports at fe10 [size=4]
	Region 2: I/O ports at fe20 [size=8]
	Region 3: I/O ports at fe30 [size=4]
	Region 4: I/O ports at fea0 [size=16]

00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
	Subsystem: Dell Computer Corporation: Unknown device 0174
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 3
	Region 4: I/O ports at eda0 [size=32]

00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
	Subsystem: Dell Computer Corporation: Unknown device 0174
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 3
	Region 0: I/O ports at ee00
	Region 1: I/O ports at edc0 [size=64]
	Region 2: Memory at feb7fa00 (32-bit, non-prefetchable) [size=512]
	Region 3: Memory at feb7f900 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:01.0 Modem: Broadcom Corporation BCM4212 v.90 56k modem (rev 02) (prog-if 00 [Generic])
	Subsystem: Dell Computer Corporation: Unknown device 0001
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at feafe000 (32-bit, non-prefetchable)
	Region 1: I/O ports at df30 [size=16]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

01:08.0 Ethernet controller: Intel Corp. 82562EZ 10/100 Ethernet Controller (rev 02)
	Subsystem: Dell Computer Corporation: Unknown device 0174
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2000ns min, 14000ns max), Cache Line Size 10
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at feaff000 (32-bit, non-prefetchable)
	Region 1: I/O ports at df40 [size=64]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

-- 
Howard Holm <howard-fedora holmgrown com>



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]