camera, again, from scratch
Gene Heskett
gene.heskett at verizon.net
Sat May 15 02:00:41 UTC 2004
Greetings;
With my camera removed from the usbautocam listing, plugged in
and turned on, I get this from an lsusb -v:
Bus 003 Device 007: ID 07b4:0105 Olympus Optical Co., Ltd Camedia C-700/C-3040/C-4000 Zoom Camera
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 Interface
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x07b4 Olympus Optical Co., Ltd
idProduct 0x0105 Camedia C-700/C-3040/C-4000 Zoom Camera
bcdDevice 1.00
iManufacturer 1 OLYMPUS
iProduct 2 C3100Z/C3020Z
iSerial 3 000217211011
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 7 Printer
bInterfaceSubClass 1 Printer
bInterfaceProtocol 2 Bidirectional
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Language IDs: (length=4)
0409 English(US)
Before I upgraded to FC1, I could do a
mount -t vfat /dev/sda1 /mnt/camera, and then use any copy
util to download the images in its card memory. Now I am
getting messages from mount to the effect that its not a
valid block device.
Hotplug is re-installed, and automount is running, and has
a lock on the /misc dir so tight I cannot see any of the
oughly 3 gigabytes of data stored in subdirs of /misc.
The /.automount directory is either similarly locked, or
empty. lsof does no links to /.automount, so I presume its empty.
With autofs stopped, this comes up in the logs when I turn it on:
May 14 21:55:53 coyote kernel: usb 3-2.2: new full speed USB device using address 8
May 14 21:55:53 coyote kernel: usb 3-2.2: Product: C3100Z/C3020Z
May 14 21:55:53 coyote kernel: usb 3-2.2: Manufacturer: OLYMPUS
May 14 21:55:53 coyote kernel: usb 3-2.2: SerialNumber: 000217211011
May 14 21:55:53 coyote kernel: scsi4 : SCSI emulation for USB Mass Storage devices
May 14 21:55:53 coyote kernel: Vendor: OLYMPUS Model: C-3020ZOOM(U) Rev: 1.00
May 14 21:55:53 coyote kernel: Type: Direct-Access ANSI SCSI revision: 02
May 14 21:55:53 coyote kernel: Attached scsi generic sg2 at scsi4, channel 0, id 0, lun 0, type 0
May 14 21:55:53 coyote scsi.agent[4980]: disk at /devices/pci0000:00/0000:00:11.4/usb3/3-2/3-2.2/3-2.2:1.0/host4/4:0:0:0
May 14 21:55:53 coyote modprobe: FATAL: Module sd_mod not found.
Note no mention of /dev/sda1, only sg2, and sg2 is worthless
for a block device. And what is sd_mod?
My ./config was posted in a previous message.
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.22% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attorneys please note, additions to this message
by Gene Heskett are:
Copyright 2004 by Maurice Eugene Heskett, all rights reserved.
More information about the fedora-list
mailing list