how to erase DVD+RW on FC2
Janis K
janis.vzp at latnet.lv
Thu May 20 14:53:15 UTC 2004
----- Original Message -----
From: "h.breimer" <acbk at zeelandnet.nl>
To: "For users of Fedora Core releases" <fedora-list at redhat.com>
Sent: Thursday, May 20, 2004 5:32 PM
Subject: Re: how to erase DVD+RW on FC2
> On Thu, 20 May 2004 17:05:45 +0300
> "Janis K" <janis.vzp at latnet.lv> wrote:
>
> > hello guys
> >
> > what is the right way to erase the DVD+RW disk on Fedora Core 2?
> >
> > I can write on my DVD+RW disk some files with k3b software, but how
> > can I erase my DVD+RW disk?
> >
> > I have PHILIPS DVD+R/RW burner
> >
> > the command "cdrecord -scanbus" shows this:
> >
> > scsidev: 'ATA'
> > devname: 'ATA'
> > scsibus: -2 target: -2 lun: -2
> > Warning: Using badly designed ATAPI via /dev/hd* interface.
> > Linux sg driver version: 3.5.27
> > Using libscg version 'schily-0.8'.
> > cdrecord: Warning: using inofficial libscg transport code version
> > (schily - Red Hat-scsi-linux-sg.c-1.80-RH '@(#)scsi-linux-sg.c
> > 1.80 04/03/08 Copyright 1997 J. Schilling').
> > scsibus1:
> > 1,0,0 100) 'PHILIPS ' 'DVDRW228 ' '1.29' Removable
> > CD-ROM 1,1,0 101) *
> > 1,2,0 102) *
> > 1,3,0 103) *
> > 1,4,0 104) *
> > 1,5,0 105) *
> > 1,6,0 106) *
> > 1,7,0 107) *
> >
> > -------------------
> >
> > and when i'm trying this: "dvdrecord dev=1,0,0 -v blank=fast" then I
> > get this:
> >
> > [root at fc2 /]# dvdrecord dev=1,0,0 -v blank=fast
> > dvdrtools v0.1.4
> > Portions (c) 2002-2003 Ark Linux <bero at arklinux.org>
> > Based on:
> > Cdrecord 1.11a15 (i386-redhat-linux-gnu) Copyright (C) 1995-2001 Jörg
> > Schilling
> > TOC Type: 1 = CD-ROM
> > scsidev: '1,0,0'
> > scsibus: 1 target: 0 lun: 0
> > dvdrecord: No such file or directory. Cannot open '/dev/sg*'. Cannot
> > open SCSI driver.
> > dvdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you
> > are root.
> >
> > can you please help me where to find some info on how to erase my
> > DVD+RW disk?
> >
> > thank you
> >
>
> For me :
> cdrecord -v dev=ATAPI:0,1,0 blank=fast
> works.
> recording:
> cdrecord -v dev=ATAPI:0,1,0 -eject -dao /path/to/some.iso
> as well.
> My cdwriter is /hdd
> success, but YMMV
>
> Henk
>
For me this command "cdrecord -v dev=ATAPI:1,0,0 blank=fast" says this:
...
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO
Supported modes: SAO
Drive buf size : 1310720 = 1280 KB
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Starting to write CD/DVD at speed 1.0 in real BLANK mode for single
session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Performing OPC...
Error: this media does not support blanking, ignoring.
This drive or media does not support the 'BLANK media' command
cdrecord: Cannot blank disk, aborting.
why I get "Error: this media does not support blanking, ignoring" ???
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
>
More information about the fedora-list
mailing list