IDE controller in Core 1

[Mark Susol | Ultimate Creative Media]

I've had some troubles with hardware on a 1U server I have running Fedora
Core1. The slave drive seems to be the main issue. The original slave drive
came up with a bunch of bad sector errors after only a short time deployed.

Now I made a copy of the slave drive and put in a new one. I'm still having
troubles with this drive now..although different issues.

On start up I get in dmsg:

hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: DMA disabled
ide0: reset: success

But under really heavy load, I start will see the following come up and a
manual reboot is required:

May 25 14:45:12 startbox kernel: EXT3-fs error (device ide0(3,66)):
ext3_get_inode_loc: unable to read inode block - inode=9618429,
block=19234849

And then it will start this on reboot

May 25 15:37:08 startbox kernel: end_request: I/O error, dev 03:42 (hdb),
sector 142873472
May 25 15:37:08 startbox kernel: end_request: I/O error, dev 03:42 (hdb),
sector 38333656
May 25 15:37:09 startbox kernel: end_request: I/O error, dev 03:42 (hdb),
sector 38333656

So do I have a problem with IDE drivers in this kenerl from the Fedora core
1 CDs ?

Info about my system:

ASRock P4S1 MoBo with SiS 661FX
Linux version 2.4.22-1.2115.nptl (bhcompile at daffy.perf.redhat.com) (gcc
version 3.2.3 20030422 (Red Hat Linux 3.2.3-6)) #1 Wed Oct 29 15:42:51 EST
2003
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST380011A, ATA DISK drive
hdb: Maxtor 6Y080L0, ATA DISK drive



Mark Susol
-------------------------------
u l t i m a t e ­ CreativeMedia
Web | Print | CD Media | eCommerce
www.ultimatecreativemedia.com
Ph: 301-668-0588