6-in-1 card reader: works in fc1 and not in fc2

[Mads Villadsen]

I have a 6-in-1 card reader, that works in Fedora Core 1 when using the
tip here: http://fedoranews.org/krishnan/tips/tip044.shtml - ie. setting
max_scsi_luns in grub.conf and modules.conf.

However that doesn't work in Fedora Core 2. I have also tried the latest
kernel (kernel-2.6.6-1.383) since that was supposed to have som USB
fixes.

Here is the output from /var/log/messages when I insert the device:


May 26 11:41:11 ice kernel: usb 2-1: USB disconnect, address 4
May 26 11:41:14 ice kernel: usb 2-1: new full speed USB device using
address 5
May 26 11:41:15 ice kernel: scsi2 : SCSI emulation for USB Mass Storage
devices
May 26 11:41:15 ice kernel:   Vendor: ICSI      Model: SD Card
Rev: 2.7C
May 26 11:41:15 ice kernel:   Type:   Direct-Access
ANSI SCSI revision: 02
May 26 11:41:15 ice kernel: Attached scsi removable disk sda at scsi2,
channel 0, id 0, lun 0
May 26 11:41:16 ice scsi.agent[3888]: disk
at /devices/pci0000:00/0000:00:1e.0/0000:02:0e.0/usb2/2-1/2-1:1.0/host2/2:0:0:0

As far as I can tell it seems to think that there is only one card slot.

I also tried:
	echo "scsi add-single-device 0 0 0 0" > /proc/scsi/scsi

but that doesn't change the output of cat /proc/scsi/scsi:
Attached devices:
Host: scsi2 Channel: 00 Id: 00 Lun: 00
  Vendor: ICSI     Model: SD Card          Rev: 2.7C
  Type:   Direct-Access                    ANSI SCSI revision: 02

Has anyone had any experience with this?
-- 
Mads Villadsen <maxx at krakoa.dk>