audio cd
Newtz, Brian
brian.newtz at BeldenBrick.com
Thu May 27 13:35:45 UTC 2004
Adam,
I had a problem with my CD not working either and found that my CD input was muted. Try using alsamixer from a terminal to unmute anything that shouldn't be muted.
-Brian
-----Original Message-----
From: fedora-list-bounces at redhat.com [mailto:fedora-list-bounces at redhat.com] On Behalf Of fedora-list-request at redhat.com
Sent: Thursday, May 27, 2004 9:04 AM
To: fedora-list at redhat.com
Subject: fedora-list Digest, Vol 3, Issue 459
Send fedora-list mailing list submissions to
fedora-list at redhat.com
To subscribe or unsubscribe via the World Wide Web, visit
http://www.redhat.com/mailman/listinfo/fedora-list
or, via email, send a message with subject or body 'help' to
fedora-list-request at redhat.com
You can reach the person managing the list at
fedora-list-owner at redhat.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of fedora-list digest..."
Today's Topics:
1. logwatch & tripwire (Hans Scheffers)
2. Audio CD (Adam Antoniak)
3. Mount NTFS partition (Fedora List)
4. Re: New release (Alexander Dalloz)
5. ethereal gui and stuff (Sy Beamont)
6. Re: kernel 2.6 and KVM's [Solution] (Don Maxwell)
7. Re: Problem compiling kernel 2.6 on FC2 (Ra?l Moratalla)
8. System-config-securitylevel breaks passive FTP (Simon Andrews)
9. Re: ethereal gui and stuff (Christopher K. Johnson)
10. Re: Asus P4P800 (was: New release) (Tarjei Knapstad)
11. upgrading to Xwindows (Rick Lim)
12. Re: rsyncing 79gb of data to 250gb drive (James Wilkinson)
13. Re: GUI for firewall configuration (Steve Thorpe)
14. Re: ATI Radeon 7000 and DRI (Ed Gurski)
15. Re: Asus P4P800 (Jakub Kamecki)
16. Re: Vncserver setup (William Hooper)
17. fschk at STARTUP (Andrea Carotti)
18. Re: ethereal gui and stuff (Sy Beamont)
19. bonobo-activation-server keeps running after logout??
(Neal D. Becker)
20. Trash always full? (Dylan Parry)
21. Re: ATI Rage Mobility under FC2 (Re: Mozilla problem after
upgrading to FC2) (William Hooper)
----------------------------------------------------------------------
Message: 1
Date: Thu, 27 May 2004 13:53:38 +0200
From: Hans Scheffers <hans at jiflin.nl>
Subject: logwatch & tripwire
To: fedora-list at redhat.com
Message-ID: <40B5D6C2.5040407 at jiflin.nl>
Content-Type: text/plain; charset=us-ascii; format=flowed
Hi,
I installed the tripwire package on my FC 1 system, but the results are
not in de daily logwatch reports.
Anyone knows how I can enter tripwire to logwatch?
grtz
--
Hans Scheffers
------------------------------
Message: 2
Date: Thu, 27 May 2004 13:56:22 +0200 (METDST)
From: Adam Antoniak <antonim at panda.bg.univ.gda.pl>
Subject: Audio CD
To: fedora-list at redhat.com
Message-ID:
<Pine.HPP.3.96L01AT.1040527135311.14006A-100000 at panda.bg.univ.gda.pl>
Content-Type: TEXT/PLAIN; charset=US-ASCII
Just moved from FC1 to FC2 and having solved problem with XP not booting
at all and encountered a new one. Whenewer I insert audio CD into my
drive, the audio player starts and seems to be working, but I can't hear
any sound. At the same time xmms plays mp3's correctly, so the sound
system seems to be ok.
Could anyone put me into right direction. I wanna enjoy music on my Fedora
box again.
Adam
------------------------------
Message: 3
Date: Thu, 27 May 2004 14:02:03 +0200
From: Fedora List <fedora-list at bluewise.co.za>
Subject: Mount NTFS partition
To: fedora-list at redhat.com
Message-ID: <1085659318.3410.42.camel at timon.bluewise.co.za>
Content-Type: text/plain
Hi list
I'm trying to mount an NTFS partition.
FC1 on hda and Winnie XP Pro (NTFS) on hdb.
I've RPM'ed the correct kernel-ntfs rpm.
cat /proc/filesystems reflects ntfs available.
I've created /mnt/hdb1
When trying to mount hdb1 error message:
...not a valid block device
I've run almost all conceivable combinations and permutations of mount
-auto etc
Is there anything I haven't done?
TIA
S2@
------------------------------
Message: 4
Date: Thu, 27 May 2004 14:03:00 +0200
From: Alexander Dalloz <alexander.dalloz at uni-bielefeld.de>
Subject: Re: New release
To: bmb9jrm at bmb.leeds.ac.uk, For users of Fedora Core releases
<fedora-list at redhat.com>
Message-ID: <1085659379.4717.495.camel at sirendipity.dogma.lan>
Content-Type: text/plain; charset="utf-8"
Am Do, den 27.05.2004 schrieb Jonathan Manning um 13:37:
> Bit of a newbie here, so apologies if I'm missing the obvious. I have
> FC1, and I've noticed that there is now FC2. Is it worthwhile to obtain
> the new distribution- what benefits are there above (a fully updated)
> FC1? I tried to find some release notes with changes etc without much
> luck.
http://download.fedora.redhat.com/pub/fedora/linux/core/2/i386/os/RELEASE-NOTES-en.html
> Also, is it possible to get an 'update' version, or is a complete
> replacement of the OS necessary?
Depends on you customization of your FC1 system. A complete fresh
install of FC2 while keeping your /home is maybe recommended. Digging
the list archive you will find that topic discussed. Some are lucky with
an upgrade (online or with CDs), others prefer a fresh new install.
> Jon
Alexander
--
Alexander Dalloz | Enger, Germany | GPG key 1024D/ED695653 1999-07-13
Fedora GNU/Linux Core 1 (Yarrow) on Athlon CPU kernel 2.4.22-1.2188.nptl
Sirendipity 13:59:38 up 4 days, 19:56, load average: 0.08, 0.15, 0.17
[ Γνωθι σ'αυτον - gnothi seauton ]
my life is a planetarium - and you are the stars
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Dies ist ein digital signierter Nachrichtenteil
Url : /archives/fedora-list/attachments/20040527/78f6cefd/attachment.bin
------------------------------
Message: 5
Date: Thu, 27 May 2004 08:09:21 -0400
From: Sy Beamont <sbeam at attbi.com>
Subject: ethereal gui and stuff
To: fedora-list at redhat.com
Message-ID: <200405270809.21815.sbeam at attbi.com>
Content-Type: text/plain; charset="us-ascii"
When I pass the -x option to tethereal I get a libc error:
# /usr/sbin/tethereal -i lo -d tcp.port==8087,http -x
Capturing on lo
0.000000 127.0.0.1 -> 127.0.0.1 TCP 36234 > 8087 [SYN] Seq=0
Ack=0 Win=32767 Len=0 MSS=16396 TSV=17555229 TSER=0 WS=0
** ERROR **: file print.c: line 691 (print_line): should not be reached
aborting...
Aborted
#
anyonw know what is up with that?
Also what happened to the ethereal gtk gui? There used to be one that
had a nice decoded ASCII and hex dump of all the packets in a pane.
'yum list *ether*' shows nothing.
-S
------------------------------
Message: 6
Date: Thu, 27 May 2004 07:10:14 -0500
From: Don Maxwell <don.maxwell at usa.net>
Subject: Re: kernel 2.6 and KVM's [Solution]
To: Fedora List <fedora-list at redhat.com>
Message-ID: <1085659813.11319.10.camel at triggerfish.tzo.com>
Content-Type: text/plain
On Wed, 2004-05-26 at 01:33, Don wrote:
> On Tue, 2004-05-18 at 05:50, Chadley Wilson wrote:
>
> > Date: Tue, 18 May 2004 11:28:02 +0200
> > From: Chadley Wilson <chadley at pinteq.co.za>
> >
> > On Mon, 2004-05-17 at 17:45, Vernon A. Fort wrote:
> > > Quick question, has anyone found either a hardware setup or a
> > > configuration tweek which will allow you to use the wheel mouse
> > > with a KVM device (Curently I use the Belkin SOHO 4port + audio) under
> > > the 2.6* kernels.
> > >
> > Hi Vernon
> > Strange that you should experience such a Problem. but I have to ask a
> > few Q's.
> > Does the scroll work if the mouse is plugged directly into the PC, (no
> > kvm)?
> > What model KVM is it?
> > Did you only experience the problem after migrating to the 2.6 kernel?
> > Which kernel is it?
> >
> > The reason I must ask is I have over 40 Kvms on the production Line here
> > and apart from dropping the mouse between switching we have never had
> > any troubles with the scroll
>
> Does anyone know if a resolution was ever found for the problem with the
> mouse losing sync with a Belkin 4-port KVM switch? This is my KVM
> switch as well. I can confirm that the mouse does lose sync in FC2 but
> was quite stable in FC1 when toggling between PCs.
>
> CTRL-ALT-F1 and back does not seem to help nor does CTRL-ALT-BKSPC.
>
> I am writing this from my old FC1 box as the new FC2 is unstable without
> a reboot.
>
> BTW, my Logitech scroll mouse DOES work.
A solution (of sorts) is found. The loss of mouse sync when using the
Belkin 4-Port KVM switch appears limited to the PS/2 style connection to
the mouse and keyboard ports. Switching to a USB keyboard/mouse
connection via the switch shows no loss of mouse sync.
------------------------------
Message: 7
Date: Thu, 27 May 2004 14:14:43 +0200
From: Ra?l Moratalla <raul.moratalla at ono.com>
Subject: Re: Problem compiling kernel 2.6 on FC2
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <40B5DBB3.70600 at ono.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Timothy Murphy escribió:
>Raúl Moratalla wrote:
>
>
>
>>I have created the directory but it has no modules and fails during the
>>boot process. I'm very frustrated with this version of Fedora, it has
>>(in my opinion) this and other silly and important bugs. Should this be
>>solved? What must I do for compile correctly the kernel and modules?
>>
>>
>
>I've compiled linux-2.6.6 under Fedora-2 without any problems,
>so I doubt if your difficulties are anything to do with FC-2.
>
>I wasn't clear what you were doing.
>The message seemed to be about a different /lib/modules/<version>
>to the version you were compiling.
>
>
Arrrg, sorry I've misspelled (is this the correct word?) the underscore
in: make modules_install
Thanks everybody for your help :)
>Do you have an /etc/modprobe.conf (used by 2.6 kernels)?
>Did you compile a 2.6 kernel on your machine before you installed FC-2?
>Maybe you need to install module-init-tools?
>(You can get this from www.kernel.org .)
>
>To compile the kernel I would get linux-2.6.6.tar.bz2
>from http://www.kernel.org
>un-tar it in /usr/src/linux-2.6.6
>go to this directory and say
>make oldconfig; make xconfig [or make menuconfig]
>Make sure the settings are correct for your machine, and say
>make bzImage; make modules
>and then (as root)
>make modules_install
>make install
>
>
>
>
>
------------------------------
Message: 8
Date: Thu, 27 May 2004 13:22:47 +0100
From: Simon Andrews <simon.andrews at bbsrc.ac.uk>
Subject: System-config-securitylevel breaks passive FTP
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <40B5DD97.6030102 at bbsrc.ac.uk>
Content-Type: text/plain; charset=us-ascii; format=flowed
During an upgrade from FC1 to FC2 I decided to add a firewall to one of
our servers. I used the system-config-securitylevel tool to enable the
firewall and allow through the services we need (ftp, http and ssh).
However, after enabling the firewall I found that ftp was broken. I
could connect, but could not get directory listings or transfer files.
Disabling the firewall caused everything to start working again.
Looking back through bugzilla I came across:
http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=111228
..which is exactly the problem I had, and enabling the ip_nat_ftp
iptables module caused everything to work through the firewall again.
My question therefore is why is this not considered a bug?? Surely if
someone selects to allow ftp traffic through their firewall then they
should not need to make additional (and distinctly non-obvious!) changes
to config files to actually allow it to work.
------------------------------
Message: 9
Date: Thu, 27 May 2004 08:25:03 -0400
From: "Christopher K. Johnson" <ckjohnson at gwi.net>
Subject: Re: ethereal gui and stuff
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <40B5DE1F.1060603 at gwi.net>
Content-Type: text/plain; charset=us-ascii; format=flowed
Sy Beamont wrote:
>Also what happened to the ethereal gtk gui? There used to be one that
>had a nice decoded ASCII and hex dump of all the packets in a pane.
>'yum list *ether*' shows nothing.
>
>
It is still in the ethereal-gnome package which is included in the FC2
distro.
--
-----------------------------------------------------------
"Spend less! Do more! Go Open Source..." -- Dirigo.net
Chris Johnson, RHCE #807000448202021
------------------------------
Message: 10
Date: 27 May 2004 14:28:34 +0200
From: Tarjei Knapstad <tarjei.knapstad at predichem.com>
Subject: Re: Asus P4P800 (was: New release)
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <1085660914.21607.3.camel at tarjei>
Content-Type: text/plain
On Thu, 2004-05-27 at 13:41, Jakub Kamecki wrote:
> Jonathan Manning wrote:
>
<snip>
>
> One critical problem is that it doesn't want to install on Asus P4p800
> motherboards (still unresolved?)
The problem was tracked down by Bob Arendt and Arjan's made a special
P4P800 boot iso available which contains a workaround:
http://people.redhat.com/arjanv/asusp4p800-boot.iso
Gory details:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121819
Cheers,
--
Tarjei
------------------------------
Message: 11
Date: Thu, 27 May 2004 05:38:23 -0700
From: Rick Lim <rick.lim at shaw.ca>
Subject: upgrading to Xwindows
To: Fedora List <fedora-list at redhat.com>
Message-ID: <EHEPLBNGGPEGJOAMFCHLGEGHDDAA.rick.lim at shaw.ca>
Content-Type: text/plain; charset=iso-8859-1
Hi there,
This question probably has been asked before but I can't find anything on
it.
I have upgraded a RH9.0 system (non Xwindows) to Fedora Core2, now I want to
upgrade to an Xwindows installation on the same machine without a complete
reinstall.
How would I go about this?
TIA
------------------------------
Message: 12
Date: Thu, 27 May 2004 13:41:00 +0100
From: James Wilkinson <james at westexe.demon.co.uk>
Subject: Re: rsyncing 79gb of data to 250gb drive
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <20040527124100.GA1976 at howells.westexe.demon.co.uk>
Content-Type: text/plain; charset=us-ascii
I recommended to Michael Mansour:
> You can also use
> cd /data01
> for i in * ; do du -sk "$i" "/data02/$i" ; done | more
Michael replied:
> Ok, I've tried this and the following is the result:
>
> [root at server data01]# for i in * ; do du -sk "$i"
> "/data02/$i" ; done |more
> 4 lost+found
> 12 /data02/lost+found
> 79596252 Software
> 123557857 /data02/Software
>
> Which seems to again confirm that the directories are
> exact copies of one another (which is what rsync is
> meant to do), but again with much different sizes.
Well, in that case, you could always try
cd /data01/Software
for i in * ; do du -sk "$i" "/data02/Software/$i" ; done | more
to see which of the directories inside Software have increased in size.
Then you can try similar drill-downs.
This will show you, basically, whether it's only part of the contents
which have increased requirements (in which case, you look more
closely at that data), or whether the storage requirements for
everything has increased (in which case, there's probably something
odd about one or other filesystem).
James.
--
E-mail address: james@ | Today Has Been Two Of Those Days.
westexe.demon.co.uk | -- Mike Andrews
------------------------------
Message: 13
Date: Thu, 27 May 2004 08:41:35 -0400 (EDT)
From: thorpe at cnidr.org (Steve Thorpe)
Subject: Re: GUI for firewall configuration
To: fedora-list at redhat.com
Message-ID: <200405271241.i4RCfZ300419 at postage1.cnidr.org>
Content-Type: text/plain; charset=us-ascii
> Mark Haney wrote:
> > Is there a gui for configuring the firewall other than the one in the
> > initial install? I guess I'm getting lazy because I'm tired of
> > configuring iptables by hand.
> >
> I've foud an excellent gui and very friendly program in firestarter.
> Bye
> Andrea
I like fwbuilder a lot. See http://www.fwbuilder.org/ for further info.
Steve
------------------------------
Message: 14
Date: Thu, 27 May 2004 08:44:08 -0400
From: Ed Gurski <ed at gurski.com>
Subject: Re: ATI Radeon 7000 and DRI
To: fedora-list at redhat.com
Message-ID: <1085661847.15345.24.camel at eagrhl02s.imf.org>
Content-Type: text/plain
On Thu, 2004-05-27 at 07:53, Alan wrote:
>
> > I have a Radeon 7000 card on an Athlon system with a SiS motherboard.
> >
> > I installed Fedora Core 2 on it. X worked all through the install.
> >
> > When I rebooted the system, the screen goes black and the system hangs.
> > (Or at least X goes into a state I cannot get out of without a hard
> > reboot.)
>
> Can't you get to a text console with Ctrl-Alt-F1 ?
>
> I'm interested because I have an ATI Rage Mobility P/M card
> in my Sony C1VFK which will only work at DefaultDepth 8.
> Otherwise I get a black screen gradually shrinking to a white screen -
> but I can always get to a text console.
>
> > If I comment out the dri line in /etc/X11/xorg.conf, it works fine, but
> > I do not get hardware acceleration.
>
> I tried this, but it had no effect in my case.
>
> It seems to me the Xorg "ati" driver is less than perfect.
>
>
>
I have a Dell Latitude with an ATI Mobility Radeon that has the same
problem. My workaround, is to get to a command prompt, logon as a user
and then issue the startx command. Then I get the GUI without problems.
I am not sure why this works, but it's a workaround.
I did try commenting out the dri line but still had the same issue.
This laptop had no problems with FC1
------------------------------
Message: 15
Date: Thu, 27 May 2004 14:37:26 +0200
From: Jakub Kamecki <mega_kafaro at gazeta.pl>
Subject: Re: Asus P4P800
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <40B5E106.4070605 at gazeta.pl>
Content-Type: text/plain; charset=us-ascii; format=flowed
Tarjei Knapstad wrote:
> The problem was tracked down by Bob Arendt and Arjan's made a special
> P4P800 boot iso available which contains a workaround:
>
> http://people.redhat.com/arjanv/asusp4p800-boot.iso
>
> Gory details:
>
> https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121819
>
> Cheers,
Cheers indeed! Thanks mate :-) Must've missed it.
I was on the brink of downloading Mandrake 10.
------------------------------
Message: 16
Date: Thu, 27 May 2004 08:49:15 -0400 (EDT)
From: "William Hooper" <whooperhsd3 at earthlink.net>
Subject: Re: Vncserver setup
To: fedora-list at redhat.com
Message-ID: <3103.12.29.16.103.1085662155.squirrel at 12.29.16.103>
Content-Type: text/plain;charset=iso-8859-1
Collen Blijenberg <MLHJ> said:
> I'm trying to setup a vncserver for fedora core 2
>
> it's working, if i use the "share desktop" thing within kde.
> but every time, when i try to setup a vnc session,
> this popup screen comes up, asking for confirmation
> to accept the session...
>
> it's quite difficult to hit the accept button, when the server is 4
> stores down.. !!?
Use the VNC module instead of KDE's desktop sharing.
http://www.realvnc.com/v4/x0.html
(Adjusting XFree86 -> Xorg as needed).
--
William Hooper
------------------------------
Message: 17
Date: Thu, 27 May 2004 14:52:30 +0200
From: Andrea Carotti <and.carotti at farmchim.uniba.it>
Subject: fschk at STARTUP
To: fedora-list at redhat.com
Message-ID: <1085662350.2824.8.camel at om7>
Content-Type: text/plain
Hi all,
there is the possibility to set by default the Y (5 seconds...) choice
after a not clean shutdown at the request of the control of the
filesystem during the startup?
TNX
Andrea
------------------------------
Message: 18
Date: Thu, 27 May 2004 08:53:16 -0400
From: Sy Beamont <sbeam at attbi.com>
Subject: Re: ethereal gui and stuff
To: For users of Fedora Core releases <fedora-list at redhat.com>
Message-ID: <200405270853.16799.sbeam at attbi.com>
Content-Type: text/plain; charset="iso-8859-1"
On Thursday 27 May 2004 08:25 am, Christopher K. Johnson wrote:
> Sy Beamont wrote:
> >Also what happened to the ethereal gtk gui? There used to be one
> > that had a nice decoded ASCII and hex dump of all the packets in a
> > pane. 'yum list *ether*' shows nothing.
>
> It is still in the ethereal-gnome package which is included in the
> FC2 distro.
Thanks but I am still on FC1. Yum couldn't find it (!) so I went to
ethereal.org and got their rpm's, works fine.
------------------------------
Message: 19
Date: Thu, 27 May 2004 08:53:46 -0400
From: "Neal D. Becker" <ndbecker2 at verizon.net>
Subject: bonobo-activation-server keeps running after logout??
To: fedora-list at redhat.com
Message-ID: <c94ocq$crp$1 at sea.gmane.org>
Content-Type: text/plain; charset=us-ascii
I'm noticing on a new FC2 x86_64 installation,
that /usr/libexec/bonobo-activation-server is running as each user that has
logged into the desktop, even after the user has logged out. The processes
are children of init. Is this normal?
------------------------------
Message: 20
Date: Thu, 27 May 2004 14:00:04 +0100
From: "Dylan Parry" <me at dylanparry.com>
Subject: Trash always full?
To: "fedora-list at redhat.com" <fedora-list at redhat.com>
Message-ID: <opr8ns2eh6p571i6 at localhost.localdomain>
Content-Type: text/plain; format=flowed; delsp=yes; charset=utf-8
Hi,
Is there a quick-fix for the trash always appearing full in KDE3.2 for FC2?
--
Dylan Parry
http://www.webpageworkshop.co.uk - FREE Web tutorials and references
------------------------------
Message: 21
Date: Thu, 27 May 2004 09:03:16 -0400 (EDT)
From: "William Hooper" <whooperhsd3 at earthlink.net>
Subject: Re: ATI Rage Mobility under FC2 (Re: Mozilla problem after
upgrading to FC2)
To: fedora-list at redhat.com
Message-ID: <3845.12.29.16.103.1085662996.squirrel at 12.29.16.103>
Content-Type: text/plain;charset=iso-8859-1
Please send replies to the list.
Charles E Taylor IV said:
> On Wed, 26 May 2004 20:53:35 -0400 (EDT)
> "William Hooper" <whooperhsd3 at earthlink.net> wrote:
>
>> Looking at my Xorg.0.log:
>>
>> (--) PCI:*(1:0:0) ATI Technologies Inc Rage Mobility P/M AGP 2x rev 100
>> [snip]
>> (==) ATI(0): Chipset: "ati".
>> (**) ATI(0): Depth 16, (--) framebuffer bpp 16
>>
>> I've got a Dell Latitude CPx.
>
> Do you have 3D acceleration with Fedora Core 2?
Haven't bothered to try.
--
William Hooper
------------------------------
--
fedora-list mailing list
fedora-list at redhat.com
http://www.redhat.com/mailman/listinfo/fedora-list
End of fedora-list Digest, Vol 3, Issue 459
*******************************************
More information about the fedora-list
mailing list