Power off machine become halt only in FC3

Fri Nov 12 16:26:17 UTC 2004

On Fri, 12 Nov 2004 15:11:58 +0100, Mariusz W <gogers at poczta.onet.pl> wrote:
> James Wilkinson wrote:
> 
> 
> > Wong Kwok-hon wrote:
> >
> >>After I upgraded to FC3. I found that the poweroff option because halt
> >>only and failed to power off my PC..
> >>Is there some thing wrong on me or the kernel error ?
> >
> >
> > Works for me, but...
> >
> > What motherboard do you have? What chipset? How old is your BIOS?
> >
> > Do you have Hyperthreading enabled or multiple processors?
> >
> > Powering off implies BIOS support using either APM or ACPI. APM doesn't
> > work on SMP (including Hyperthreading) boards, and ACPI might be turned
> > off, either by a kernel option, or the kernel not liking your BIOS.
> >
> > Can you post the results of
> > grep -i ACPI /var/log/dmesg
> >
> > Thanks,
> >
> > James.
> > 
> I have the same problem with my ECS K7VTA3 motherboard. In FC2 power off
> worked fine but after upgrade to FC3 it only turns off disks and halt
> with "acpi_power_off called" message. (I upgraded with CD's, it isn't
> fresh install)
> There is result of "grep -i ACPI /var/log/dmesg":
> 
>   BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
>   BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
> ACPI: RSDP (v000 VIA694                                ) @ 0x000f6a20
> ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3000
> ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3040
> ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
> ACPI: PM-Timer IO Port: 0x4008
> ACPI: IRQ9 SCI: Level Trigger.
> ACPI: Subsystem revision 20040816
> ACPI: Interpreter enabled
> ACPI: Using PIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 *3 4 5 6 7 10 11 12 14 15)
> PCI: Using ACPI for IRQ routing
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
> ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
> ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 10 (level, low) -> IRQ 10
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
> ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 5 (level, low) -> IRQ 5
> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
> ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 3 (level, low) -> IRQ 3
> ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 5 (level, low) -> IRQ 5
> ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
> apm: overridden by ACPI.
> ACPI: Fan [FAN] (on)
> ACPI: Processor [CPU0] (supports C1 C2)
> ACPI: Thermal Zone [THRM] (47 C)
> ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11
> ACPI: (supports S0 S1 S4 S5)
> ACPI wakeup devices:
> ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
> ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 5 (level, low) -> IRQ 5
> ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 3 (level, low) -> IRQ 3
> ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 10 (level, low) -> IRQ 10
> ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 5 (level, low) -> IRQ 5
> ACPI: Power Button (FF) [PWRF]
> ACPI: Sleep Button (CM) [SLPB]
> 
> thanks for help

Hi!

This is my dmesg  and failed to power off just halt:

$ grep -i ACPI /var/log/dmesg

 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
ACPI: RSDP (v000 AOPEN                                 ) @ 0x000f6200
ACPI: RSDT (v001 AOPEN  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 AOPEN  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: DSDT (v001 AOPEN  AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
apm: overridden by ACPI.
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports C1, 2 throttling states)
ACPI: Thermal Zone [THRM] (45 C)
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: Power Button (FF) [PWRF]