Adaptec SCSI RAID Problems

[Alexander Dalloz]

Am Sa, den 13.11.2004 schrieb David Uzzell um 12:24:

> Just tring to install C3 on a server. Having challanges getting it to 
> recognise the SCSI RAID5 Array.
> 
> It is a Tyan S2518UGN motherboard with Dual PIII´s 1.4GHz and 3.5Gb of 
> Ram with 3 x 36Gb SCSI HDD´s and 2 x 40Gb ide HDD´s.
> 
> It is running an Adaptec AIC-7899W SCSI Controler onboard with a 
> Zero-Channel RAID 2000S Controler Card installed controling the raid.
> 
> I have created the raid array in the Raid controler so that is all 
> working correctly and I have tested the server and it can see the RAID 
> array using RH E3.0 or RH9 but using Fedora C3 it only sees the IDE HDD´s.

> David

Did you read the release notes? There are comments about the kind of
Adaptec RAID controller you use.

http://download.fedora.redhat.com/pub/fedora/linux/core/3/i386/os/RELEASE-NOTES-en.html

In the kernel section "I2O SCSI RAID adapters from manufacturers such as
Adaptec now use the i2o_block driver [ ... ] 
For more information about the new I2O device layer and Fedora
Core-specific notes, visit the I2O homepage:

http://i2o.shadowconnect.com/

Alexander


-- 
Alexander Dalloz | Enger, Germany | new address - new key: 0xB366A773
legal statement: http://www.uni-x.org/legal.html
Fedora GNU/Linux Core 2 (Tettnang) on Athlon kernel 2.6.8-1.521smp 
Serendipity 19:15:23 up 24 days, 16:54, load average: 0.78, 0.76, 0.51 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: Dies ist ein digital signierter Nachrichtenteil
URL: <http://listman.redhat.com/archives/fedora-list/attachments/20041113/75d62367/attachment-0001.sig>