ATI Rage 7000/AGP DUAL head with Sony 20" LCD and NEC MultiSync LCD 1720M on FC2

[Jason Monroe "JC"]

I have the following setup
ATI Rage 7000/AGP DUAL head with Sony 20" LCD and NEC MultiSync LCD
1720M on FC2 xorg 6.7.0-10.

I was looking for a xorg config that would work with 6.7.0-10 for
xinerama and my ATI 7000/AGP Dual Head setup. After googling I didn't
find anything that worked to well. I was playing recently and finally
came up on a config that worked.

Just in case any of you guys are interested you'll find the config
attached

Happy Turkey Day,


JC




-------------- next part --------------
# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "Multihead layout"
	Screen      0  "Screen 0" 0 0 
	Screen        "Screen 1" LeftOf "Screen 0"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
#	Option	    "Xinerama" "on"
#	Option	    "Clone" "off"
#	Option	    "Clone" "on"
EndSection

Section "ServerFlags"
	Option "Xinerama"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "Monitor"
	Identifier   "Sony LCD"
	VendorName   "Monitor Vendor"
	ModelName    "LCD Panel 1600x1200"
	HorizSync    28.0 - 90.0
	VertRefresh  60.0 - 60.0
	Option	    "dpms"
EndSection

Section "Monitor"
	Identifier   "NEC MultiSync LCD1720M"
	VendorName   "Monitor Vendor"
	ModelName    "LCD Panel 1280x1024"
	DisplaySize  410	310
	HorizSync    31.5 - 67.0
	VertRefresh  50.0 - 75.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "ATI Radeon-1"
	Driver      "radeon"
	BoardName   "ATI Radeon 7000"
	BusID	    "PCI:1:0:0"
	Screen	    0
EndSection

Section "Device"
	Identifier  "ATI Radeon-2"
	Driver      "radeon"
	BoardName   "ATI Radeon 7000"
	BusID       "PCI:1:0:0"
	Screen      1
EndSection

Section "Screen"
	Identifier "Screen 0"
	Device     "ATI Radeon-1"
	Monitor    "Sony LCD"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1600x1200" 
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen 1"
	Device     "ATI Radeon-2"
	Monitor    "NEC MultiSync LCD1720M"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1280x1024" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1280x1024" 
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection