How do I mount this device?

[Paul Johnson]

Hi,

I'm using both vanilla FC3 and rawhide FC3 with an 8 in 1 drive on both
machines which is registered happily in /proc/bus/usb/devices (see
below).

Question is, how do I mount anything put into it - I can't see anything
obvious and I thought that FC3 was supposed to automount anything placed
into it.

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.9-1.667 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=55aa ProdID=b012 Rev= 1.01
S:  Manufacturer= 
S:  Product=8-in-2  
S:  SerialNumber=38C3EFFD8D
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-
storage
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms

/sbin/lsusb gives

Bus 004 Device 002: ID 55aa:b012 OnSpec Electronic, Inc. 
Bus 004 Device 001: ID 0000:0000  
Bus 003 Device 002: ID 04e8:3242 Samsung Electronics Co., Ltd 
Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 004: ID 0ac8:0301 Z-Star Microelectronics Corp. 
Bus 002 Device 002: ID 050d:0002 Belkin Components 
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000  

To me, this looks like there is a problem in udev with the manufacturer
name not being transfered and also in FC3 not mounting correctly. Any
ideas?

TTFN

Paul

-- 
"I'm gonna hit the highway like a battering ram with a Cilla Black fan on
the bike" - Meatloaf