network card : device not present

[fellons]

I Rodolfo.
What you said is really.

A new table ... some time ago, I have changed table of my pc and I
have plugged cable...

sorry, but Windows not lost configurations, I don't know this.

thans you too.

bye


On Wed, 6 Oct 2004 09:38:28 -0400, Rodolfo Alcázar
<rodolfo.alcazar at padep.org.bo> wrote:
> Hi, Im a newbie at all, but maybe this tips would help you. I came from a
> wingows environment, too, and've planned staying in linux.
> 
> 1. You mention you tried some interconnections. It sounds stupid, but maybe
> when you plugged the cable, you loose the card. Verify card connection to
> board. If the card has one, check if led works fine. Check cables. Be sure
> card works.
> 2. (you didnt mention it), if kudzu does not report the misconfig when
> booting, prbabily is some configuration issue.
> 3. Check your /etc/modules.conf file. If you are using a Realtek card, maybe
> you can try "alias eth0 8139too" or a 8139cp in /etc/modules.conf instead of
> 3c501.
> 4. Use dmesg command and check logs (in /var/log dir), maybe you can find
> some advice.
> 
> Rodolfo
> 
> 
> 
> ----- Original Message -----
> From: "fellons" <roberto.felloni at gmail.com>
> 
> > Hi to all.
> >
> > For the first, I wanna said thanks to who have reply me.
> > I don't answer at once becouse I think is better try the solutions
> > replied me, read some article, try to make ecc... and after, if my
> > problem never-ending ... then send new mail :)
> >
> > My network card don't work again  :((
> > anaconda (I think is it! who make boot) and "ifup eth0"said "device not
> > present"
> >
> > Some god man can help me, please ?
> >
> > I attach information result to my job :
> > - lspci found
> > 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> > RTL-8139/8139C/8139C+ (rev 10)
> >
> > - in /etc/modprobe.conf
> > alias eth0 3c501
> >
> > - lsmod not found nothing
> > lsmod not found some of eth0, 3c501 or some other with net do than
> > specify use of network card
> >
> > - dirver not found in /lib/modules ...
> >
> > - this is my ifcfg-eth0
> > DEVICE=eth0
> > BOOTPROTO=none
> > IPADDR=192.168.0.1
> > NETMASK=255.255.255.0
> > ONBOOT=yes
> > USERCTL=no
> > PEERDNS=no
> > TYPE=Ethernet
> > IPV6INIT=no (this I think is off becouse I have write "alias net-pf-10
> > off" on modprobe.conf - for a problem of SSHD)
> >
> > I prefer to work with terminal, but I have try to use once
> > system-config-network.
> > This prog know my card, but card is deactivated.
> > If I try to active card, this is the message returned:
> > "system-config-network:17917): Gtk-CRITICAL **: file gtktextbuffer.c: line
> > 557
> > (gtk_text_buffer_emit_insert): assertion `g_utf8_validate (text, len,
> > NULL)'
> > failed"
> >
> > This card work (if is not broken now!) before have worked on direct
> > connection onto 2 win2000 and also onto win2000 and redhat 7.3 (this
> > last not really sure to work well).
> >
> > Now I work with apache, write something for web, and apache on
> > 127.0.0.1 work well.
> >
> > My project is a domestic network, and this pc must become a server
> > machine (for what services I don't know now (DNS, MAIL, INTERNET ...))
> >
> > I come to Windows world, and Linux is to me hard to understand.
> >
> > NB
> > all operation are executed with root.
> >
> > Sorry for the long mail
> > Thank in advantage for any answer
> > and sorry for my english.
> >
> > bye by fellons
> >
> > --
> > fedora-list mailing list
> > fedora-list at redhat.com
> > To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
> 
>