AVM Fritz Card and capi

[Ian Clough]

I am on FC2 and have upgraded to 2.6.8 - 521

I am trying to get my passive ISDN card - AVM Fritz working with my 
application - Asterisk.

After some help from Alexander D. I changed /etc/sysconfig/isdncard
The line
MODULE=hisax
is changed to:
MODULE='hisax_fcpcipnp'
my card now appears to function although it starts two times
 In the log on boot up I see:-

Oct 15 07:12:36 vigor11 kernel: 0000:02:09.0: 3Com PCI 3c905C Tornado at 
0x3400. Vers LK1.1.19
Oct 15 07:12:36 vigor11 kernel: CSLIP: code copyright 1989 Regents of the 
University of California
Oct 15 07:12:36 vigor11 kernel: ISDN subsystem Rev: 
1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
Oct 15 07:12:36 vigor11 kernel: HiSax: Linux Driver for passive ISDN cards
Oct 15 07:12:36 vigor11 kernel: HiSax: Version 3.5 (module)
Oct 15 07:12:36 vigor11 kernel: HiSax: Layer1 Revision 2.46.2.5
Oct 15 07:12:36 vigor11 kernel: HiSax: Layer2 Revision 2.30.2.4
Oct 15 07:12:36 vigor11 kernel: HiSax: TeiMgr Revision 2.20.2.3
Oct 15 07:12:36 vigor11 kernel: HiSax: Layer3 Revision 2.22.2.3
Oct 15 07:12:36 vigor11 kernel: HiSax: LinkLayer Revision 2.59.2.4
Oct 15 07:12:36 vigor11 kernel: hisax_isac: ISAC-S/ISAC-SX ISDN driver 
v0.1.0
Oct 15 07:12:36 vigor11 kernel: hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP 
ISDN driver v0.0.1
Oct 15 07:12:36 vigor11 kernel: HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0 
(0)
Oct 15 07:12:36 vigor11 kernel: HiSax: DSS1 Rev. 2.32.2.3
Oct 15 07:12:36 vigor11 kernel: HiSax: 2 channels added
Oct 15 07:12:36 vigor11 kernel: HiSax: MAX_WAITING_CALLS added
Oct 15 07:12:36 vigor11 kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 
(level, low) -> IRQ 5
Oct 15 07:12:36 vigor11 kernel: hisax_fcpcipnp: found adapter Fritz!Card PCI 
v2 at 0000:02:05.0
Oct 15 07:12:36 vigor11 kernel: HiSax module removed
Oct 15 07:12:36 vigor11 kernel: ISDN-subsystem unloaded
Oct 15 07:12:36 vigor11 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Oct 15 07:12:36 vigor11 kernel: CSLIP: code copyright 1989 Regents of the 
University of California
Oct 15 07:12:36 vigor11 kernel: ISDN subsystem Rev: 
1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
Oct 15 07:12:36 vigor11 kernel: HiSax: Linux Driver for passive ISDN cards
Oct 15 07:12:36 vigor11 kernel: HiSax: Version 3.5 (module)
Oct 15 07:12:36 vigor11 kernel: HiSax: Layer1 Revision 2.46.2.5
Oct 15 07:12:36 vigor11 kernel: HiSax: Layer2 Revision 2.30.2.4
Oct 15 07:12:36 vigor11 kernel: HiSax: TeiMgr Revision 2.20.2.3
Oct 15 07:12:36 vigor11 kernel: HiSax: Layer3 Revision 2.22.2.3
Oct 15 07:12:36 vigor11 kernel: HiSax: LinkLayer Revision 2.59.2.4
Oct 15 07:12:36 vigor11 kernel: hisax_isac: ISAC-S/ISAC-SX ISDN driver 
v0.1.0
Oct 15 07:12:36 vigor11 kernel: hisax_fcpcipnp: Unknown parameter `type'
Oct 15 07:12:37 vigor11 kernel: hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP 
ISDN driver v0.0.1
Oct 15 07:12:37 vigor11 kernel: HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0 
(0)
Oct 15 07:12:37 vigor11 kernel: HiSax: DSS1 Rev. 2.32.2.3
Oct 15 07:12:37 vigor11 kernel: HiSax: 2 channels added
Oct 15 07:12:37 vigor11 kernel: HiSax: MAX_WAITING_CALLS added
Oct 15 07:12:37 vigor11 kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 
(level, low) -> IRQ 5
Oct 15 07:12:37 vigor11 kernel: hisax_fcpcipnp: found adapter Fritz!Card PCI 
v2 at 0000:02:05.0
Oct 15 07:12:37 vigor11 kernel: Zapata Telephony Interface Registered on 
major 196
Oct 15 07:12:37 vigor11 kernel: Registered tone zone 0 (United States / 
North America)

The card functions a little because I see messages in the log:-

Oct 11 20:32:07 vigor11 kernel: isdn_tty: Incoming call without OAD, 
assuming '0'
Oct 11 20:32:07 vigor11 kernel: isdn_tty: call from 0 -> 693027 ignored

My problem is that I cannot use capi.
[root at Vigor11 log]# capiinit
ERROR: cannot load module kernelcapi

I then modprobe kernelcapi and capi but still see the same error message


[root at Vigor11 log]# modprobe kernelcapi
[root at Vigor11 log]# modprobe capi
[root at Vigor11 log]# capiinit
ERROR: cannot load module kernelcapi
[root at Vigor11 log]# lsmod | grep capi
capi                   13441  0
capifs                  4041  2 capi
kernelcapi             39393  1 capi
[root at Vigor11 log]#


Can anybody help?

Thanks

Ian