[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: machine don't halt(continuing)!



Well,

I suppose that isn't a ACPI problem because I left the machine turned on
2 days, but without log in any user ... and it's halt.

When I log in the machine, left a lot of time on and try to halt I got a
kernel panic ... a lot of memory addresses rolls down in the screen.

I'm trying to turn off directly from gnome halt ... from the graphical
mode.

For that reasons, I suppose that there is a NFS problem, because without
logged in the machine turn off without problem.

I have tried: ACPI=off APM=on also, without success.

Actually the machine has ACPI=on and APM=off in the mode 5 startup.

Thanks again...

Erico.


Em Seg, 2004-10-11 às 09:40, Erico Augusto escreveu:
> Hi,
> 
> I've a machine that don't halt. Firstly i suppose that was a ACPI
> problem.But it isn't. Now, I suppose that there is some problem with
> NFS. The machine imports, from NFS,  the /home from a Fedora 2 Server
> with H.A.
> 
> Another information is that when the user logs out, some processes owned
> by this user are still running.
> 
> Anyone have a clue?
> 
> Thanks, and sorry by the previuos message, i got some confusion with the
> evolution shortcuts. :-)
> 
> below, the dmesg of the, machine:
> 
> Linux version 2.6.8-1.521-t1 (root marcelo) (gcc version 3.3.3 20040412 
> (Red Hat Linux 3.3.3-7)) #3 Fri Sep 24 12:05:55 BRT 2004
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 000000000ffec000 (usable)
>  BIOS-e820: 000000000ffec000 - 000000000ffef000 (ACPI data)
>  BIOS-e820: 000000000ffef000 - 000000000ffff000 (reserved)
>  BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
>  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> 255MB LOWMEM available.
> zapping low mappings.
> On node 0 totalpages: 65516
>   DMA zone: 4096 pages, LIFO batch:1
>   Normal zone: 61420 pages, LIFO batch:14
>   HighMem zone: 0 pages, LIFO batch:1
> DMI 2.3 present.
> ACPI: RSDP (v000 ASUS                                      ) @ 
> 0x000f7360
> ACPI: RSDT (v001 ASUS   TUV4X    0x30303031 MSFT 0x31313031) @ 
> 0x0ffec000
> ACPI: FADT (v001 ASUS   TUV4X    0x30303031 MSFT 0x31313031) @ 
> 0x0ffec080
> ACPI: BOOT (v001 ASUS   TUV4X    0x30303031 MSFT 0x31313031) @ 
> 0x0ffec040
> ACPI: DSDT (v001   ASUS TUV4X    0x00001000 MSFT 0x0100000b) @ 
> 0x00000000
> ACPI: PM-Timer IO Port: 0xe408
> Built 1 zonelists
> Kernel command line: ro root=LABEL=/ quiet
> Initializing CPU#0
> CPU 0 irqstacks, hard=c035e000 soft=c035d000
> PID hash table entries: 1024 (order 10: 8192 bytes)
> Detected 1102.886 MHz processor.
> Using tsc for high-res timesource
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Memory: 255980k/262064k available (1623k kernel code, 5364k reserved, 
> 623k data, 136k init, 0k highmem)
> Calibrating delay loop... 2162.68 BogoMIPS
> Security Scaffold v1.0.0 initialized
> SELinux:  Initializing.
> SELinux:  Starting in permissive mode
> There is already a security framework initialized, register_security 
> failed.
> selinux_register_security:  Registering secondary module capability
> Capability LSM initialized as secondary
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
> CPU: After vendor identify, caps:  0383f9ff 00000000 00000000 00000000
> CPU: L1 I cache: 16K, L1 D cache: 16K
> CPU: L2 cache: 256K
> CPU: After all inits, caps:        0383f1ff 00000000 00000000 00000040
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: Intel Pentium III (Coppermine) stepping 0a
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> checking if image is initramfs...it isn't (no cpio magic); looks like 
> an initrd
> Freeing initrd memory: 179k freed
> NET: Registered protocol family 16
> PCI: PCI BIOS revision 2.10 entry at 0xf0d20, last bus=1
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20040326
> ACPI: IRQ9 SCI: Edge set to Level Trigger.
> ACPI: Interpreter enabled
> ACPI: Using PIC for interrupt routing
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, 
> disabled.
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, 
> disabled.
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
> Linux Plug and Play Support v0.97 (c) Adam Belay
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> ACPI: PCI interrupt 0000:00:04.2[D] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI interrupt 0000:00:04.3[D] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
> ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 10 (level, low) -> IRQ 10
> ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 10 (level, low) -> IRQ 10
> vesafb: probe of vesafb0 failed with error -6
> Simple Boot Flag at 0x3a set to 0x1
> apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16ac)
> apm: overridden by ACPI.
> audit: initializing netlink socket (disabled)
> audit(1096457291.793:0): initialized
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> SELinux:  Registering netfilter hooks
> Initializing Cryptographic API
> ksign: Installing public key data
> Loading keyring
> - Added public key 5C40C2D2D7186B51
> - User ID: Red Hat, Inc. (Kernel Module GPG key)
> ksign: invalid packet (ctb=00)
> Unable to load default keyring: error=74
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> ACPI: Processor [CPU0] (supports C1 C2, 16 throttling states)
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Real Time Clock Driver v1.12
> Linux agpgart interface v0.100 (c) Dave Jones
> agpgart: Detected VIA Apollo Pro 133 chipset
> agpgart: Maximum main memory to use for agp memory: 203M
> agpgart: AGP aperture is 32M @ 0xfc000000
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing 
> enabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> divert: not allocating divert_blk for non-ethernet device lo
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with 
> idebus=xx
> VP_IDE: IDE controller at PCI slot 0000:00:04.1
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on 
> pci0000:00:04.1
>     ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
>     ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
> hda: ST320410A, ATA DISK drive
> Using cfq io scheduler
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hdc: ATAPI CD-ROM VER 1.0, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 128KiB
> hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, 
> UDMA(100)
>  hda: hda1 hda2 hda3 hda4
> ide-cd: cmd 0x5a timed out
> hdc: irq timeout: status=0xd0 { Busy }
> hdc: irq timeout: error=0x00
> hdc: DMA disabled
> hdc: ATAPI reset complete
> ide-cd: cmd 0x5a timed out
> hdc: irq timeout: status=0xc0 { Busy }
> hdc: irq timeout: error=0x00
> hdc: ATAPI reset complete
> ide-cd: cmd 0x5a timed out
> hdc: irq timeout: status=0xc0 { Busy }
> hdc: irq timeout: error=0x00
> hdc: ATAPI CD-ROM drive, 0kB Cache
> Uniform CD-ROM driver Revision: 3.20
> hdc: status timeout: status=0xc0 { Busy }
> hdc: status timeout: error=0x00
> hdc: drive not ready for command
> hdc: ATAPI reset complete
> ide-floppy driver 0.99.newide
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.0:USB HID core driver
> mice: PS/2 mouse device common for all mice
> serio: i8042 AUX port at 0x60,0x64 irq 12
> input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
> serio: i8042 KBD port at 0x60,0x64 irq 1
> input: AT Translated Set 2 keyboard on isa0060/serio0
> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> NET: Registered protocol family 2
> IP: routing cache hash table of 2048 buckets, 16Kbytes
> TCP: Hash tables configured (established 16384 bind 32768)
> Initializing IPsec netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> ACPI: (supports S0 S1 S4 S5)
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> RAMDISK: Compressed image found at block 0
> VFS: Mounted root (ext2 filesystem).
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> Freeing unused kernel memory: 136k freed
> SELinux:  Disabled at runtime.
> SELinux:  Unregistering netfilter hooks
> ACPI: Power Button (FF) [PWRF]
> USB Universal Host Controller Interface driver v2.2
> ACPI: PCI interrupt 0000:00:04.2[D] -> GSI 11 (level, low) -> IRQ 11
> uhci_hcd 0000:00:04.2: UHCI Host Controller
> uhci_hcd 0000:00:04.2: irq 11, io base 0000d400
> uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> ACPI: PCI interrupt 0000:00:04.3[D] -> GSI 11 (level, low) -> IRQ 11
> uhci_hcd 0000:00:04.3: UHCI Host Controller
> uhci_hcd 0000:00:04.3: irq 11, io base 0000d000
> uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> EXT3 FS on hda4, internal journal
> device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm uk sistina com
> cdrom: open failed.
> Adding 524152k swap on /dev/hda3.  Priority:-1 extents:1
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS on hda1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS on hda2, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
> parport_pc: Via 686A parallel port: io=0x378
> SCSI subsystem initialized
> inserting floppy driver for 2.6.8-1.521-t1
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> 8139too Fast Ethernet driver 0.9.27
> ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 10 (level, low) -> IRQ 10
> divert: allocating divert_blk for eth0
> eth0: RealTek RTL8139 at 0xb800, 00:50:fc:41:6c:cf, IRQ 10
> eth0:  Identified 8139 chip type 'RTL-8139C'
> divert: freeing divert_blk for eth0
> ip_tables: (C) 2000-2002 Netfilter core team
> 8139too Fast Ethernet driver 0.9.27
> ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 10 (level, low) -> IRQ 10
> divert: allocating divert_blk for eth0
> eth0: RealTek RTL8139 at 0xb800, 00:50:fc:41:6c:cf, IRQ 10
> eth0:  Identified 8139 chip type 'RTL-8139C'
> ip_tables: (C) 2000-2002 Netfilter core team
> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
> parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
> parport_pc: Via 686A parallel port: io=0x378
> lp0: using parport0 (polling).
> lp0: console ready
> NET: Registered protocol family 10
> Disabled Privacy Extensions on device c02f4b80(lo)
> IPv6 over IPv4 tunneling driver
> divert: not allocating divert_blk for non-ethernet device sit0
> eth0: no IPv6 routers present
> ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]