AVM Fritz Card and capi
Ian Clough
ianhome at intech.co.uk
Sun Oct 17 09:37:38 UTC 2004
Thanks again Alexander
>You are using HiSaX as well as trying CAPI. You can't use both at same
>time. If you want to use CAPI then you have to avoid the loading of any
>HiSaX module. You too have to get the CAPI closed source tarball from
>the AVM ftp server.
>I have no Fritz PCI card, so I can't test it myself on FC2. Following is
>the list of CAPI related modules I have on another system:
>capidrv 27188 2
>isdn 130048 2 [capidrv]
>fcclassic 584256 4
>capi 19936 6
>capifs 5036 1 [capi]
>kernelcapi 33248 6 [capidrv fcclassic capi]
>capiutil 24544 0 [capidrv kernelcapi]
>You don't need necessarily capidrv, and fcclassic is the module for my
>old ISA Fritz card.
>Alexander
I downloaded the tarball from AVM and ran ./install which reported:-
[root at Vigor11 fritz]# ./install
Welcome to the FRITZ!Card PCI driver installation!
Generating FRITZ!Card PCI driver for kernel 2.6.8-1.521...
Copying FRITZ!Card PCI driver...
src/fcpci.ko to /lib/modules/2.6.8-1.521/extra/fcpci.ko
The driver files have been copied.
Ready
[root at Vigor11 fritz]#
I then changed /etc/sysconf/isdncard to:-
RESOURCES='protocol=2 type=27 id=HiSax'
NAME='AVM PCI (Fritz!PCI)'
MODULE=fcpci
VENDOR_ID=1244
FIRMWARE=
I guess that this is not correct - how do I find the correct settings?
When I reboot my log says:-
Oct 17 09:36:20 vigor11 kernel: CAPI Subsystem Rev 1.1.2.8
Oct 17 09:36:20 vigor11 kernel: fcpci: module license 'Proprietary' taints
kernel.
Oct 17 09:36:20 vigor11 kernel: fcpci: Unknown parameter `protocol'
Oct 17 09:36:20 vigor11 kernel: fcpci: AVM FRITZ!Card PCI driver, revision
0.6.2
Oct 17 09:36:20 vigor11 kernel: fcpci: (fcpci built on Oct 17 2004 at
09:31:17)
Oct 17 09:36:20 vigor11 kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5
(level, low) -> IRQ 5
Oct 17 09:36:20 vigor11 kernel: fcpci: AVM FRITZ!Card PCI found: port
0x3000, irq 5
Oct 17 09:36:20 vigor11 kernel: fcpci: Loading...
Oct 17 09:36:20 vigor11 kernel: fcpci: Driver 'fcpci' attached to stack.
(152)
Oct 17 09:36:20 vigor11 kernel: fcpci: Stack version 3.11-02
Oct 17 09:36:20 vigor11 kernel: kcapi: Controller 1: fcpci-3000-05 attached
Oct 17 09:36:20 vigor11 kernel: kcapi: card 1 "fcpci-3000-05" ready.
Oct 17 09:36:20 vigor11 kernel: fcpci: Loaded.
Oct 17 09:36:20 vigor11 kernel: fcpci: Removing...
Oct 17 09:36:20 vigor11 kernel: kcapi: card 1 down.
Oct 17 09:36:21 vigor11 kernel: kcapi: Controller 1: fcpci-3000-05
unregistered
Oct 17 09:36:21 vigor11 kernel: fcpci: Removed.
Oct 17 09:36:21 vigor11 kernel: fcpci: Driver 'fcpci' detached
Any ideas
I also cannot find the capiutil module
Ian
More information about the fedora-list
mailing list