AVM Fritz Card and capi
Alexander Dalloz
alexander.dalloz at uni-bielefeld.de
Sun Oct 17 14:12:44 UTC 2004
Am So, den 17.10.2004 schrieb Ian Clough um 11:37:
> I downloaded the tarball from AVM and ran ./install which reported:-
> [root at Vigor11 fritz]# ./install
>
> Welcome to the FRITZ!Card PCI driver installation!
>
> Generating FRITZ!Card PCI driver for kernel 2.6.8-1.521...
> Copying FRITZ!Card PCI driver...
> src/fcpci.ko to /lib/modules/2.6.8-1.521/extra/fcpci.ko
>
> The driver files have been copied.
>
> Ready
Ok, good so far.
> [root at Vigor11 fritz]#
>
> I then changed /etc/sysconf/isdncard to:-
> RESOURCES='protocol=2 type=27 id=HiSax'
> NAME='AVM PCI (Fritz!PCI)'
> MODULE=fcpci
> VENDOR_ID=1244
> FIRMWARE=
>
> I guess that this is not correct - how do I find the correct settings?
You have to remove the whole file. Best is to move it to a safe place
where you could get it back later, if you need to.
> When I reboot my log says:-
> Oct 17 09:36:20 vigor11 kernel: CAPI Subsystem Rev 1.1.2.8
> Oct 17 09:36:20 vigor11 kernel: fcpci: module license 'Proprietary' taints
> kernel.
> Oct 17 09:36:20 vigor11 kernel: fcpci: Unknown parameter `protocol'
> Oct 17 09:36:20 vigor11 kernel: fcpci: AVM FRITZ!Card PCI driver, revision
> 0.6.2
> Oct 17 09:36:20 vigor11 kernel: fcpci: (fcpci built on Oct 17 2004 at
> 09:31:17)
> Oct 17 09:36:20 vigor11 kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5
> (level, low) -> IRQ 5
> Oct 17 09:36:20 vigor11 kernel: fcpci: AVM FRITZ!Card PCI found: port
> 0x3000, irq 5
> Oct 17 09:36:20 vigor11 kernel: fcpci: Loading...
> Oct 17 09:36:20 vigor11 kernel: fcpci: Driver 'fcpci' attached to stack.
> (152)
> Oct 17 09:36:20 vigor11 kernel: fcpci: Stack version 3.11-02
> Oct 17 09:36:20 vigor11 kernel: kcapi: Controller 1: fcpci-3000-05 attached
> Oct 17 09:36:20 vigor11 kernel: kcapi: card 1 "fcpci-3000-05" ready.
> Oct 17 09:36:20 vigor11 kernel: fcpci: Loaded.
> Oct 17 09:36:20 vigor11 kernel: fcpci: Removing...
> Oct 17 09:36:20 vigor11 kernel: kcapi: card 1 down.
> Oct 17 09:36:21 vigor11 kernel: kcapi: Controller 1: fcpci-3000-05
> unregistered
> Oct 17 09:36:21 vigor11 kernel: fcpci: Removed.
> Oct 17 09:36:21 vigor11 kernel: fcpci: Driver 'fcpci' detached
> Any ideas
I don't know why it unloads again. Be sure no HiSaX module is loaded.
> I also cannot find the capiutil module
The module might not be necessary. Maybe have a look at the kernel
documentation or help page for the module. The code is in the FC2 kernel
source, though the module is not build.
> Ian
If you run capiinit, does it now works? And what about capiinfo?
There is http://www.friendglow.net/ with some information about running
AVM cards on Fedora as well some packages. Might be helpful reading a
bit there. Feel free to ask again.
Alexander
--
Alexander Dalloz | Enger, Germany | GPG key 1024D/ED695653 1999-07-13
Fedora GNU/Linux Core 2 (Tettnang) kernel 2.6.8-1.521smp
Serendipity 16:04:27 up 3 days, 11:15, load average: 0.53, 0.42, 0.24
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: Dies ist ein digital signierter Nachrichtenteil
URL: <http://listman.redhat.com/archives/fedora-list/attachments/20041017/9a2f472f/attachment-0001.sig>
More information about the fedora-list
mailing list