Re: Support Question:

[Edward Croft <ecroft OPENRATINGS com>]

On Mon, 2004-10-18 at 12:34 -0400, Jared Bloomer wrote:
> I am currently using Redhat 9 because I had trouble with FC1 not
> supporting my network card.
> 
> My Network card is : Xircom RBEM56G-100 NIC/56k modem
> 
> I was just curious if FC2 supports this card now, cus without it I have
> no way of getting online. 
> 
Jared, I did a google on this and after quite a few misses, came up with
this.

	[pcmcia-cs driver: tulip_cb] [x86,ppc]
	[2.4+ kernel driver: xircom_cb]
	[ ethernet only ]
	Silicom FEM56 Fast Ethernet
	[ Not recommended: support is experimental and unreliable ]
	IBM EtherJet CardBus with 56K Modem
	Xircom RBEM56G-100BTX, CBEM56G-100BTX, R2BEM56G-100

Note that it says it is experimental. It was from this page:
http://pcmcia-cs.sourceforge.net/ftp/SUPPORTED.CARDS
Last updated in July. 

You may want to scan that list for supported cards and maybe replace that card.



-- 
Edward M. Croft
Sr. Systems Engineer
Open Ratings, Inc.
200 West Street
Waltham, MA 02451-1121