[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Fedora Core 2 Upgraded Kernel Won't Boot



Help me Obiwan Kenobi

I've just built a new system, and installed FC2 on it.

Installation went smoothly in general, although I ran into a problem when I updated the kernel. I can't get any kernel to boot other than the kernel that was installed during the initial system installation ( kernel-2.6.5-1.358 ).

I'm not booting with quiet or rhgb flags, and I don't use XP or anything else on this box, and no other OS has ever been installed on any of this hardware.

I went through the last several thousand posts on gmane and didn't find anyone with a similar problem.

Running yum update updated my whole system, including the kernel which went to "kernel-2.6.8-1.521", however when I reboot I can't get 2.6.8 to boot. 2.6.5 still boots fine. I compiled my own kernel (I'm no guru but I'm not a noob - been doing Linux since the 0.99 kernels) but that didn't boot either. Kernel's freeze immediately before the uncompress message starts, right after grub prints out what it's arguments are (kernel, initrd). I can get the specifics if they are useful.

The config below is somewhat complicated (software RAID + reiserfs), but I reproduced the same problem with a plain install to /dev/hda with just ext3.

Hoping someone has some ideas?

Thank you in advance,

- Dave

Hardware:

   ASUS A7N8X-E Deluxe Motherboard w 1800MHz Duron BIOS Rev 1011 nForce
   2 Motherboard
   1GB RAM
   G-Force Video Card
   6x WDC 200GB Hard Disks

       2x on motherboard IDE
       2x on Promise 133TX2
       2x on 2nd Promise 133TX2

1x DVD+-RW


The motherboard includes 2 SATA ports but I'm not using those [yet].


Here's what's loaded

   kernel-2.6.5-1.358
   kernel-source-2.6.5-1.358
   kernel-2.6.8-1.521
   kernel-utils-2.4-9.1.131
   grub-0.94-5


Here's my grub.conf


   default=1
   timeout=10
   splashimage=(hd0,0)/grub/splash.xpm.gz

   title Fedora Core (2.6.8-1.521)
           root (hd0,0)
           kernel /vmlinuz-2.6.8-1.521 ro root=/dev/md1
           initrd /initrd-2.6.8-1.521.img

   title Fedora Core (2.6.5-1.358)
           root (hd0,0)
           kernel /vmlinuz-2.6.5-1.358 ro root=/dev/md1 hdm=noprobe
   hdo=noprobe
           initrd /initrd-2.6.5-1.358.img


Here's my fstab


/dev/md1 / reiserfs
defaults 1 1
/dev/md0 /boot ext3 defaults 1 2
none /dev/pts devpts gid=5,mode=620 0 0
none /dev/shm tmpfs size=256M,defaults 0 0
/dev/md2 /mnt/data1 reiserfs
defaults 1 2
none /proc proc defaults 0 0
none /sys sysfs defaults 0 0
/dev/md3 swap swap defaults 0 0
/dev/md4 swap swap defaults 0 0
/dev/cdrom /mnt/cdrom udf,iso9660
noauto,owner,kudzu,ro 0 0


Here's my disk setup

/dev/hda settings

name value min max mode
---- ----- --- --- ----
acoustic 0 0 254 rw
address 1 0 2 rw
bios_cyl 24321 0 65535 rw
bios_head 255 0 255 rw
bios_sect 63 0 63 rw
bswap 0 0 1 r
current_speed 69 0 70 rw
failures 0 0 65535 rw
init_speed 12 0 70 rw
io_32bit 1 0 3 rw
keepsettings 0 0 1 rw
lun 0 0 7 rw
max_failures 1 0 65535 rw
multcount 16 0 16 rw
nice1 1 0 1 rw
nowerr 0 0 1 rw
number 0 0 3 rw
pio_mode write-only 0 255 w
unmaskirq 1 0 1 rw
using_dma 1 0 1 rw
wcache 0 0 1 rw


/dev/hdb settings

name value min max mode
---- ----- --- --- ----
acoustic 0 0 254 rw
address 1 0 2 rw
bios_cyl 24321 0 65535 rw
bios_head 255 0 255 rw
bios_sect 63 0 63 rw
bswap 0 0 1 r
current_speed 69 0 70 rw
failures 0 0 65535 rw
init_speed 12 0 70 rw
io_32bit 1 0 3 rw
keepsettings 0 0 1 rw
lun 0 0 7 rw
max_failures 1 0 65535 rw
multcount 16 0 16 rw
nice1 1 0 1 rw
nowerr 0 0 1 rw
number 1 0 3 rw
pio_mode write-only 0 255 w
unmaskirq 1 0 1 rw
using_dma 1 0 1 rw
wcache 0 0 1 rw




Here's my bootup dmesg

Linux version 2.6.5-1.358 (bhcompile bugs build redhat com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Sat May 8 09:04:50 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
1023MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 262128
 DMA zone: 4096 pages, LIFO batch:1
 Normal zone: 258032 pages, LIFO batch:16
 HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 Nvidia                                    ) @ 0x000f75e0
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7640
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Kernel command line: ro root=/dev/md1 hdm=noprobe hdo=noprobe
ide_setup: hdm=noprobe
ide_setup: hdo=noprobe
mapped 4G/4G trampoline to ffff3000.
Initializing CPU#0
CPU 0 irqstacks, hard=02345000 soft=02344000
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 1804.207 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Memory: 1036448k/1048512k available (1540k kernel code, 11292k reserved, 599k data, 144k init, 0k highmem)
Calibrating delay loop... 3571.71 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
Failure registering capabilities with the kernel
selinux_register_security:  Registering secondary module capability
Capability LSM initialized
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU:     After all inits, caps: 0383f3ff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Duron(tm) processor stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16)
ACPI: PCI Interrupt Link [APC2] (IRQs *17)
ACPI: PCI Interrupt Link [APC3] (IRQs *18)
ACPI: PCI Interrupt Link [APC4] (IRQs *19)
ACPI: PCI Interrupt Link [APC5] (IRQs 16)
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 5
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 9
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 5
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 9
ACPI: PCI Interrupt Link [LAPU] enabled at IRQ 9
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 5
ACPI: PCI Interrupt Link [LFIR] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1097920528.012:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 32M @ 0xe8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
   ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
   ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD2000JB-00EVA0, ATA DISK drive
hdb: WDC WD2000JB-00EVA0, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: OPTORITEDVD RW DD1203, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
PDC20269: IDE controller at PCI slot 0000:01:08.0
PDC20269: chipset revision 2
PDC20269: 100% native mode on irq 11
   ide2: BM-DMA at 0x9400-0x9407, BIOS settings: hde:pio, hdf:pio
   ide3: BM-DMA at 0x9408-0x940f, BIOS settings: hdg:pio, hdh:pio
hde: WDC WD2000JB-00GVA0, ATA DISK drive
hdf: WDC WD2000JB-00EVA0, ATA DISK drive
ide2 at 0x8400-0x8407,0x8802 on irq 11
PDC20269: IDE controller at PCI slot 0000:01:09.0
PDC20269: chipset revision 2
PDC20269: 100% native mode on irq 5
   ide4: BM-DMA at 0xa800-0xa807, BIOS settings: hdi:pio, hdj:pio
   ide5: BM-DMA at 0xa808-0xa80f, BIOS settings: hdk:pio, hdl:pio
hdi: WDC WD2000JB-00EVA0, ATA DISK drive
hdj: WDC WD2000JB-00EVA0, ATA DISK drive
ide4 at 0x9800-0x9807,0x9c02 on irq 5
SiI3112 Serial ATA: IDE controller at PCI slot 0000:01:0b.0
SiI3112 Serial ATA: chipset revision 2
SiI3112 Serial ATA: 100% native mode on irq 11
   ide6: MMIO-DMA , BIOS settings: hdm:pio, hdn:pio
   ide7: MMIO-DMA , BIOS settings: hdo:pio, hdp:pio
hda: max request size: 1024KiB
hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hda: hda1 hda2 hda3 hda4 < hda5 >
hdb: max request size: 1024KiB
hdb: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 >
hde: max request size: 1024KiB
hde: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hde: hde1 hde2 hde3 hde4 < hde5 >
hdf: max request size: 1024KiB
hdf: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hdf: hdf1 hdf2 hdf3 hdf4 < hdf5 >
hdi: max request size: 1024KiB
hdi: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hdi: hdi1 hdi2 hdi3 hdi4 < hdi5 >
hdj: max request size: 1024KiB
hdj: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hdj: hdj1 hdj2 hdj3 hdj4 < hdj5 >
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow: PowerNOW! Technology present. Can scale: nothing.
ACPI: (supports S0 S1 S3 S4 S4bios S5)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 295k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: considering hdj5 ...
md:  adding hdj5 ...
md: hdj3 has different UUID to hdj5
md: hdj2 has different UUID to hdj5
md: hdj1 has different UUID to hdj5
md:  adding hdi5 ...
md: hdi3 has different UUID to hdj5
md: hdi2 has different UUID to hdj5
md: hdi1 has different UUID to hdj5
md:  adding hdf5 ...
md: hdf3 has different UUID to hdj5
md: hdf2 has different UUID to hdj5
md: hdf1 has different UUID to hdj5
md:  adding hde5 ...
md: hde3 has different UUID to hdj5
md: hde2 has different UUID to hdj5
md: hde1 has different UUID to hdj5
md:  adding hdb5 ...
md: hdb3 has different UUID to hdj5
md: hdb2 has different UUID to hdj5
md: hdb1 has different UUID to hdj5
md:  adding hda5 ...
md: hda3 has different UUID to hdj5
md: hda2 has different UUID to hdj5
md: hda1 has different UUID to hdj5
md: created md2
md: bind<hda5>
md: bind<hdb5>
md: bind<hde5>
md: bind<hdf5>
md: bind<hdi5>
md: bind<hdj5>
md: running: <hdj5><hdi5><hdf5><hde5><hdb5><hda5>
md: personality 4 is not loaded!
md :do_md_run() returned -22
md: md2 stopped.
md: unbind<hdj5>
md: export_rdev(hdj5)
md: unbind<hdi5>
md: export_rdev(hdi5)
md: unbind<hdf5>
md: export_rdev(hdf5)
md: unbind<hde5>
md: export_rdev(hde5)
md: unbind<hdb5>
md: export_rdev(hdb5)
md: unbind<hda5>
md: export_rdev(hda5)
md: considering hdj3 ...
md:  adding hdj3 ...
md: hdj2 has different UUID to hdj3
md: hdj1 has different UUID to hdj3
md:  adding hdi3 ...
md: hdi2 has different UUID to hdj3
md: hdi1 has different UUID to hdj3
md:  adding hdf3 ...
md: hdf2 has different UUID to hdj3
md: hdf1 has different UUID to hdj3
md:  adding hde3 ...
md: hde2 has different UUID to hdj3
md: hde1 has different UUID to hdj3
md:  adding hdb3 ...
md: hdb2 has different UUID to hdj3
md: hdb1 has different UUID to hdj3
md:  adding hda3 ...
md: hda2 has different UUID to hdj3
md: hda1 has different UUID to hdj3
md: created md4
md: bind<hda3>
md: bind<hdb3>
md: bind<hde3>
md: bind<hdf3>
md: bind<hdi3>
md: bind<hdj3>
md: running: <hdj3><hdi3><hdf3><hde3><hdb3><hda3>
md: personality 4 is not loaded!
md :do_md_run() returned -22
md: md4 stopped.
md: unbind<hdj3>
md: export_rdev(hdj3)
md: unbind<hdi3>
md: export_rdev(hdi3)
md: unbind<hdf3>
md: export_rdev(hdf3)
md: unbind<hde3>
md: export_rdev(hde3)
md: unbind<hdb3>
md: export_rdev(hdb3)
md: unbind<hda3>
md: export_rdev(hda3)
md: considering hdj2 ...
md:  adding hdj2 ...
md: hdj1 has different UUID to hdj2
md:  adding hdi2 ...
md: hdi1 has different UUID to hdj2
md:  adding hdf2 ...
md: hdf1 has different UUID to hdj2
md:  adding hde2 ...
md: hde1 has different UUID to hdj2
md:  adding hdb2 ...
md: hdb1 has different UUID to hdj2
md:  adding hda2 ...
md: hda1 has different UUID to hdj2
md: created md1
md: bind<hda2>
md: bind<hdb2>
md: bind<hde2>
md: bind<hdf2>
md: bind<hdi2>
md: bind<hdj2>
md: running: <hdj2><hdi2><hdf2><hde2><hdb2><hda2>
md: personality 4 is not loaded!
md :do_md_run() returned -22
md: md1 stopped.
md: unbind<hdj2>
md: export_rdev(hdj2)
md: unbind<hdi2>
md: export_rdev(hdi2)
md: unbind<hdf2>
md: export_rdev(hdf2)
md: unbind<hde2>
md: export_rdev(hde2)
md: unbind<hdb2>
md: export_rdev(hdb2)
md: unbind<hda2>
md: export_rdev(hda2)
md: considering hdj1 ...
md:  adding hdj1 ...
md:  adding hdi1 ...
md:  adding hdf1 ...
md:  adding hde1 ...
md: hdb1 has different UUID to hdj1
md: hda1 has different UUID to hdj1
md: created md3
md: bind<hde1>
md: bind<hdf1>
md: bind<hdi1>
md: bind<hdj1>
md: running: <hdj1><hdi1><hdf1><hde1>
md: personality 4 is not loaded!
md :do_md_run() returned -22
md: md3 stopped.
md: unbind<hdj1>
md: export_rdev(hdj1)
md: unbind<hdi1>
md: export_rdev(hdi1)
md: unbind<hdf1>
md: export_rdev(hdf1)
md: unbind<hde1>
md: export_rdev(hde1)
md: considering hdb1 ...
md:  adding hdb1 ...
md:  adding hda1 ...
md: created md0
md: bind<hda1>
md: bind<hdb1>
md: running: <hdb1><hda1>
md: personality 3 is not loaded!
md :do_md_run() returned -22
md: md0 stopped.
md: unbind<hdb1>
md: export_rdev(hdb1)
md: unbind<hda1>
md: export_rdev(hda1)
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
SCSI subsystem initialized
libata version 1.02 loaded.
md: raid1 personality registered as nr 3
raid5: measuring checksumming speed
  8regs     :  2736.000 MB/sec
  8regs_prefetch:  2484.000 MB/sec
  32regs    :  1980.000 MB/sec
  32regs_prefetch:  1496.000 MB/sec
  pIII_sse  :  4864.000 MB/sec
  pII_mmx   :  4876.000 MB/sec
  p5_mmx    :  5816.000 MB/sec
raid5: using function: pIII_sse (4864.000 MB/sec)
md: raid5 personality registered as nr 4
md: Autodetecting RAID arrays.
md: autorun ...
md: considering hda1 ...
md:  adding hda1 ...
md:  adding hdb1 ...
md: hde1 has different UUID to hda1
md: hdf1 has different UUID to hda1
md: hdi1 has different UUID to hda1
md: hdj1 has different UUID to hda1
md: hda2 has different UUID to hda1
md: hdb2 has different UUID to hda1
md: hde2 has different UUID to hda1
md: hdf2 has different UUID to hda1
md: hdi2 has different UUID to hda1
md: hdj2 has different UUID to hda1
md: hda3 has different UUID to hda1
md: hdb3 has different UUID to hda1
md: hde3 has different UUID to hda1
md: hdf3 has different UUID to hda1
md: hdi3 has different UUID to hda1
md: hdj3 has different UUID to hda1
md: hda5 has different UUID to hda1
md: hdb5 has different UUID to hda1
md: hde5 has different UUID to hda1
md: hdf5 has different UUID to hda1
md: hdi5 has different UUID to hda1
md: hdj5 has different UUID to hda1
md: created md0
md: bind<hdb1>
md: bind<hda1>
md: running: <hda1><hdb1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: considering hde1 ...
md:  adding hde1 ...
md:  adding hdf1 ...
md:  adding hdi1 ...
md:  adding hdj1 ...
md: hda2 has different UUID to hde1
md: hdb2 has different UUID to hde1
md: hde2 has different UUID to hde1
md: hdf2 has different UUID to hde1
md: hdi2 has different UUID to hde1
md: hdj2 has different UUID to hde1
md: hda3 has different UUID to hde1
md: hdb3 has different UUID to hde1
md: hde3 has different UUID to hde1
md: hdf3 has different UUID to hde1
md: hdi3 has different UUID to hde1
md: hdj3 has different UUID to hde1
md: hda5 has different UUID to hde1
md: hdb5 has different UUID to hde1
md: hde5 has different UUID to hde1
md: hdf5 has different UUID to hde1
md: hdi5 has different UUID to hde1
md: hdj5 has different UUID to hde1
md: created md3
md: bind<hdj1>
md: bind<hdi1>
md: bind<hdf1>
md: bind<hde1>
md: running: <hde1><hdf1><hdi1><hdj1>
raid5: device hde1 operational as raid disk 0
raid5: device hdf1 operational as raid disk 1
raid5: device hdi1 operational as raid disk 2
raid5: device hdj1 operational as raid disk 3
raid5: allocated 4191kB for md3
raid5: raid level 5 set md3 active with 4 out of 4 devices, algorithm 0
RAID5 conf printout:
--- rd:4 wd:4 fd:0
disk 0, o:1, dev:hde1
disk 1, o:1, dev:hdf1
disk 2, o:1, dev:hdi1
disk 3, o:1, dev:hdj1
md: considering hda2 ...
md:  adding hda2 ...
md:  adding hdb2 ...
md:  adding hde2 ...
md:  adding hdf2 ...
md:  adding hdi2 ...
md:  adding hdj2 ...
md: hda3 has different UUID to hda2
md: hdb3 has different UUID to hda2
md: hde3 has different UUID to hda2
md: hdf3 has different UUID to hda2
md: hdi3 has different UUID to hda2
md: hdj3 has different UUID to hda2
md: hda5 has different UUID to hda2
md: hdb5 has different UUID to hda2
md: hde5 has different UUID to hda2
md: hdf5 has different UUID to hda2
md: hdi5 has different UUID to hda2
md: hdj5 has different UUID to hda2
md: created md1
md: bind<hdj2>
md: bind<hdi2>
md: bind<hdf2>
md: bind<hde2>
md: bind<hdb2>
md: bind<hda2>
md: running: <hda2><hdb2><hde2><hdf2><hdi2><hdj2>
raid5: device hda2 operational as raid disk 0
raid5: device hdb2 operational as raid disk 1
raid5: device hde2 operational as raid disk 2
raid5: device hdf2 operational as raid disk 3
raid5: device hdi2 operational as raid disk 4
raid5: device hdj2 operational as raid disk 5
raid5: allocated 6269kB for md1
raid5: raid level 5 set md1 active with 6 out of 6 devices, algorithm 0
RAID5 conf printout:
--- rd:6 wd:6 fd:0
disk 0, o:1, dev:hda2
disk 1, o:1, dev:hdb2
disk 2, o:1, dev:hde2
disk 3, o:1, dev:hdf2
disk 4, o:1, dev:hdi2
disk 5, o:1, dev:hdj2
md: considering hda3 ...
md:  adding hda3 ...
md:  adding hdb3 ...
md:  adding hde3 ...
md:  adding hdf3 ...
md:  adding hdi3 ...
md:  adding hdj3 ...
md: hda5 has different UUID to hda3
md: hdb5 has different UUID to hda3
md: hde5 has different UUID to hda3
md: hdf5 has different UUID to hda3
md: hdi5 has different UUID to hda3
md: hdj5 has different UUID to hda3
md: created md4
md: bind<hdj3>
md: bind<hdi3>
md: bind<hdf3>
md: bind<hde3>
md: bind<hdb3>
md: bind<hda3>
md: running: <hda3><hdb3><hde3><hdf3><hdi3><hdj3>
raid5: device hda3 operational as raid disk 0
raid5: device hdb3 operational as raid disk 1
raid5: device hde3 operational as raid disk 2
raid5: device hdf3 operational as raid disk 3
raid5: device hdi3 operational as raid disk 4
raid5: device hdj3 operational as raid disk 5
raid5: allocated 6269kB for md4
raid5: raid level 5 set md4 active with 6 out of 6 devices, algorithm 0
RAID5 conf printout:
--- rd:6 wd:6 fd:0
disk 0, o:1, dev:hda3
disk 1, o:1, dev:hdb3
disk 2, o:1, dev:hde3
disk 3, o:1, dev:hdf3
disk 4, o:1, dev:hdi3
disk 5, o:1, dev:hdj3
md: considering hda5 ...
md:  adding hda5 ...
md:  adding hdb5 ...
md:  adding hde5 ...
md:  adding hdf5 ...
md:  adding hdi5 ...
md:  adding hdj5 ...
md: created md2
md: bind<hdj5>
md: bind<hdi5>
md: bind<hdf5>
md: bind<hde5>
md: bind<hdb5>
md: bind<hda5>
md: running: <hda5><hdb5><hde5><hdf5><hdi5><hdj5>
raid5: device hda5 operational as raid disk 0
raid5: device hdb5 operational as raid disk 1
raid5: device hde5 operational as raid disk 2
raid5: device hdf5 operational as raid disk 3
raid5: device hdi5 operational as raid disk 4
raid5: device hdj5 operational as raid disk 5
raid5: allocated 6269kB for md2
raid5: raid level 5 set md2 active with 6 out of 6 devices, algorithm 0
RAID5 conf printout:
--- rd:6 wd:6 fd:0
disk 0, o:1, dev:hda5
disk 1, o:1, dev:hdb5
disk 2, o:1, dev:hde5
disk 3, o:1, dev:hdf5
disk 4, o:1, dev:hdi5
disk 5, o:1, dev:hdj5
md: ... autorun DONE.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
found reiserfs format "3.6" with standard journal
reiserfs: using ordered data mode
Reiserfs journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (md1) for (md1)
reiserfs: replayed 16 transactions in 1 seconds
Using r5 hash to sort names
Freeing unused kernel memory: 144k freed
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
ACPI: Power Button (FF) [PWRF]
ehci_hcd 0000:00:02.2: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 5, pci mem 428ac000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 11, pci mem 428b6000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:02.1: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 9, pci mem 428b8000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
Removing [153 31664 0x0 SD]..done
Removing [110 5622 0x0 SD]..done
Removing [151 4653 0x0 SD]..done
Removing [110 4598 0x0 SD]..done
There were 4 uncompleted unlinks/truncates. Completed
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm uk sistina com
cdrom: open failed.
Adding 312568k swap on /dev/md3.  Priority:-1 extents:1
Adding 2609912k swap on /dev/md4.  Priority:-2 extents:1
cdrom: open failed.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
found reiserfs format "3.6" with standard journal
reiserfs: using ordered data mode
Reiserfs journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (md2) for (md2)
Using r5 hash to sort names


test



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]