Fedora and Intel EM64T Xeon Processor based machine

[fabiano]

>
> If the server has a raid controller you should be able to configure 
> the hardware array using the config utility - something like ctrl + a 
> (Look for instructions just after you switch the machine on). Once you 
> have configured an array, you should be able to boot from a Fedora CD 
> and the array should show up as a single scsi disk in the partioning 
> screen (probably sda).

I'm agree if your hardware raid is active you'll see only one disk, and 
install/work like you have only 1 disk inside.
IN my experience with low cost Asus