Fedora driver or compatability with flash USB drive (iomega)
Edward
edward at tripled.iinet.net.au
Mon Sep 13 03:57:49 UTC 2004
Adam Boettiger wrote:
> Pasha wrote:
>
>> Look in /var/log/messages and see what device model name reported. Then
>> you can try to add match entry to /etc/updfstab.conf.default to mount
>> the device automatically.
>
>
> So here is what I believe to be the portion of the log that shows the
> detection of the Iomega drive.
>
> How and where do I "add match entry" to /etc/updfstab.conf.default ?
>
> --
>
> Sep 11 20:05:00 localhost kernel: spurious 8259A interrupt: IRQ7.
> Sep 11 20:44:03 localhost kernel: usb 1-3: new high speed USB device
> using address 2
> Sep 11 20:44:03 localhost kernel: Initializing USB Mass Storage driver...
> Sep 11 20:44:03 localhost kernel: scsi0 : SCSI emulation for USB Mass
> Storage devices
> Sep 11 20:44:04 localhost kernel: Vendor: I0MEGA Model:
> Mini512MB*IOM2A3 Rev: 4.70
> Sep 11 20:44:04 localhost kernel: Type: Direct-Access
> ANSI SCSI revision: 02
> Sep 11 20:44:04 localhost scsi.agent[3005]: disk at
> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/host0/0:0:0:0
> Sep 11 20:44:04 localhost kernel: usbcore: registered new driver
> usb-storage
> Sep 11 20:44:04 localhost kernel: USB Mass Storage support registered.
> Sep 11 20:44:04 localhost kernel: SCSI device sda: 1019392 512-byte hdwr
> sectors (522 MB)
> Sep 11 20:44:04 localhost kernel: sda: assuming Write Enabled
> Sep 11 20:44:04 localhost kernel: sda: assuming drive cache: write through
> Sep 11 20:44:04 localhost kernel: sda: sda1
> Sep 11 20:44:04 localhost kernel: Attached scsi removable disk sda at
> scsi0, channel 0, id 0, lun 0
> Sep 11 20:44:05 localhost kernel: inserting floppy driver for 2.6.5-1.358
> Sep 11 20:44:08 localhost kernel: floppy0: no floppy controllers found
> Sep 11 20:44:08 localhost modprobe: FATAL: Error inserting floppy
> (/lib/modules/2.6.5-1.358/kernel/drivers/block/floppy.ko): No such device
>
try mounting the device manually first, to make sure it is OK. As you
can tell from above, it's been installed at /dev/sda, so mount /dev/sda1.
Regards,
Ed.
More information about the fedora-list
mailing list