sony clie tj37

[sergio]

Thanks John. Still no joy :(
However got this from tail -f /var/log/messages after /sbin/modprobe 
visor and started sync from palm:

Sep  1 23:36:47 athos kernel: hub.c: new USB device 00:02.2-1.2, 
assigned address 11
Sep  1 23:36:47 athos kernel: usb.c: USB device 11 (vend/prod 
0x54c/0x169) is not claimed by any active driver.

I hope this can narrow down the options.
By the way I'm with kernel 2.4.22-1.2199.nptl on AMD processor.

John Thompson wrote:

> sergio wrote:
>
>
>> I know about j-pilot but it asks for /dev/pilot - what's this ?
>
>
> /dev/pilot is a link to the device file your Clie connects through, e.g.:
>
> [john at starfleet john]$ ls -l /dev/pilot
> lrwxrwxrwx  1 root root 12 Feb 25  2004 /dev/pilot -> /dev/ttyUSB0
>
>> I don't know what visor is.
>
>
> "visor" is the kernel module that allows your Clie to communicate with 
> your computer.  It needs to be loaded in order for this communication 
> to occur.  Ideally hotplug should load it automatically when the Clie 
> connects.
>
>> I think the problem is that some kind of driver is missing for fedora to
>> recognize my palm.
>
>
> Check that the visor module is loading, e.g. "lsmod|grep visor"
>
> If it isn't, load it manually with "modprobe visor" and try again.
>