AVM Fritz ISDN Card Problem

Ian Clough ianhome at intech.co.uk
Sat Sep 11 06:14:53 UTC 2004


----- Original Message ----- 
From: "Alexander Dalloz" <alexander.dalloz at uni-bielefeld.de>
To: "For users of Fedora Core releases" <fedora-list at redhat.com>
Sent: Friday, September 10, 2004 8:06 PM
Subject: Re: AVM Fritz ISDN Card Problem
Am Fr, den 10.09.2004 schrieb Ian Clough um 20:26:

> I need to - 'modprobe hisax'  and then  'modprobe hisax_fcpcipnp'

No, you don't need to.

$ grep hisax_fcpcipnp /lib/modules/2.6.8-1.521smp/modules.dep
/lib/modules/2.6.8-1.521smp/kernel/drivers/isdn/hisax/hisax_fcpcipnp.ko:
/lib/modules/2.6.8-1.521smp/kernel/drivers/isdn/hisax/hisax_isac.ko
/lib/modules/2.6.8-1.521smp/kernel/drivers/isdn/hisax/hisax.ko
/lib/modules/2.6.8-1.521smp/kernel/lib/crc-ccitt.ko
/lib/modules/2.6.8-1.521smp/kernel/drivers/isdn/i4l/isdn.ko
/lib/modules/2.6.8-1.521smp/kernel/drivers/net/slhc.ko

"modprobing" hisax_fcpcipnp will automatically load the hisax module.
That is the sense of using modprobe.



> Sep 10 19:21:02 Vigor11 kernel: hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP
> ISDN dr
> iver v0.0.1
> Sep 10 19:21:02 Vigor11 kernel: HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0
> (0)
> Sep 10 19:21:02 Vigor11 kernel: HiSax: DSS1 Rev. 2.32.2.3
> Sep 10 19:21:02 Vigor11 kernel: HiSax: 2 channels added
> Sep 10 19:21:02 Vigor11 kernel: HiSax: MAX_WAITING_CALLS added
> Sep 10 19:21:02 Vigor11 kernel: hisax_fcpcipnp: found adapter Fritz!Card 
> PCI
> v2
> at 0000:02:05.0

> Does this mean i'm now OK?

Yes, now the card recognized.

> I guess I need to add the modprobe to the isdn service in init.d ?

No, that should be done different.

What is the content of /etc/sysconfig/isdncard? There should be
something in like

/etc/sysconfig/isdncard steht folgendes:

RESOURCES='protocol=2'
NAME='AVM PCI (FRITZ!PCI)'
MODULE='hisax_fcpcipnp'
VENDOR_ID='1244'
DEVICE_ID='0e00'
FIRMWARE=

Important is the MODULE line.

Thanks again Alexander

I changed isdncard from MODULE='hisax' to MODULE='hisax_fcpcipcn'
When I reboot:-
Sep 11 06:48:15 Vigor11 kernel: ISDN subsystem Rev: 
1.1.2.3/1.1.2.3/1.1.2.2/1.1.
2.3/1.1.2.2/1.1.2.2 loaded
Sep 11 06:48:15 Vigor11 kernel: HiSax: Linux Driver for passive ISDN cards
Sep 11 06:48:15 Vigor11 kernel: HiSax: Version 3.5 (module)
Sep 11 06:48:15 Vigor11 kernel: HiSax: Layer1 Revision 2.46.2.5
Sep 11 06:48:15 Vigor11 kernel: HiSax: Layer2 Revision 2.30.2.4
Sep 11 06:48:15 Vigor11 kernel: HiSax: TeiMgr Revision 2.20.2.3
Sep 11 06:48:15 Vigor11 kernel: HiSax: Layer3 Revision 2.22.2.3
Sep 11 06:48:15 Vigor11 kernel: HiSax: LinkLayer Revision 2.59.2.4
Sep 11 06:48:15 Vigor11 kernel: hisax_isac: ISAC-S/ISAC-SX ISDN driver 
v0.1.0
Sep 11 06:48:15 Vigor11 kernel: hisax_fcpcipnp: Unknown parameter `type'
Sep 11 06:48:15 Vigor11 kernel: HiSax module removed
Sep 11 06:48:15 Vigor11 kernel: ISDN-subsystem unloaded

Before the reboot if I enter
modprobe hisax_fcpcipnp I get the mesage unknown module and I needed to 
enter modprobe hisax first

After changing isdncard fron 'hisax' ti 'hisax_fcpcipnp'  and after a reboot 
modprobe 'hisax_fcpcipcn' now is OK

My grep show one line less than yours:-
[root at Vigor11 2.6.5-1.358]# grep hisax_fcpcipnp modules.dep
/lib/modules/2.6.5-1.358/kernel/drivers/isdn/hisax/hisax_fcpcipnp.ko: 
/lib/modules/2.6.5-1.358/kernel/drivers/isdn/hisax/hisax_isac.ko 
/lib/modules/2.6.5-1.358/kernel/drivers/isdn/hisax/hisax.ko 
/lib/modules/2.6.5-1.358/kernel/drivers/isdn/i4l/isdn.ko 
/lib/modules/2.6.5-1.358/kernel/drivers/net/slhc.ko
[root at Vigor11 2.6.5-1.358]#

with crc-ccitt.ko missing.

Is my modules.dep broken?

Thanks again

Ian



> Ian

Alexander


-- 
Alexander Dalloz | Enger, Germany | GPG key 1024D/ED695653 1999-07-13
Fedora GNU/Linux Core 2 (Tettnang) kernel 2.6.8-1.521smp
Serendipity 21:02:26 up 11 days, 18:19, load average: 0.62, 0.47, 0.38


> -- 
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
> 






More information about the fedora-list mailing list