[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

2.6.11-1.7_FC3.x86_64 breaks on dual Opteron 244



2.6.11-1.7_FC3.x86_64 hangs somewhere during boot, after dumping CPU infos, before.
platform infos are attached, as long as a 'fine' dmesg of 2.6.10-1.770


PS: which is the correct list for testing kernels ??

regards

processor	: 0
vendor_id	: AuthenticAMD
cpu family	: 15
model		: 5
model name	: AMD Opteron(tm) Processor 244
stepping	: 10
cpu MHz		: 1792.530
cache size	: 1024 KB
fpu		: yes
fpu_exception	: yes
cpuid level	: 1
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 pni syscall nx mmxext lm 3dnowext 3dnow
bogomips	: 3522.56
TLB size	: 1088 4K pages
clflush size	: 64
cache_alignment	: 64
address sizes	: 40 bits physical, 48 bits virtual
power management: ts fid vid ttp

processor	: 1
vendor_id	: AuthenticAMD
cpu family	: 15
model		: 5
model name	: AMD Opteron(tm) Processor 244
stepping	: 10
cpu MHz		: 1792.530
cache size	: 1024 KB
fpu		: yes
fpu_exception	: yes
cpuid level	: 1
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 pni syscall nx mmxext lm 3dnowext 3dnow
bogomips	: 3579.90
TLB size	: 1088 4K pages
clflush size	: 64
cache_alignment	: 64
address sizes	: 40 bits physical, 48 bits virtual
power management: ts fid vid ttp

MemTotal:      2056668 kB
MemFree:        606164 kB
Buffers:        166492 kB
Cached:         945716 kB
SwapCached:          0 kB
Active:         345700 kB
Inactive:       785104 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:      2056668 kB
LowFree:        606164 kB
SwapTotal:     4096564 kB
SwapFree:      4096564 kB
Dirty:              20 kB
Writeback:           0 kB
Mapped:          27240 kB
Slab:           303136 kB
CommitLimit:   5124896 kB
Committed_AS:    69324 kB
PageTables:       2224 kB
VmallocTotal: 536870911 kB
VmallocUsed:      2800 kB
VmallocChunk: 536867947 kB
HugePages_Total:     0
HugePages_Free:      0
Hugepagesize:     2048 kB
PCI devices found:
  Bus  0, device   6, function  0:
    Class 0604: PCI device 1022:7460 (rev 7).
      Master Capable.  Latency=64.  Min Gnt=10.
  Bus  0, device   7, function  0:
    Class 0601: PCI device 1022:7468 (rev 5).
  Bus  0, device   7, function  1:
    Class 0101: PCI device 1022:7469 (rev 3).
      Master Capable.  Latency=32.  
      I/O at 0xffa0 [0xffaf].
  Bus  0, device   7, function  2:
    Class 0c05: PCI device 1022:746a (rev 2).
      IRQ 10.
      Master Capable.  Latency=64.  
      I/O at 0xcc00 [0xcc1f].
  Bus  0, device   7, function  3:
    Class 0680: PCI device 1022:746b (rev 5).
      Master Capable.  Latency=64.  
  Bus  0, device  10, function  0:
    Class 0604: PCI device 1022:7450 (rev 18).
      Master Capable.  Latency=64.  Min Gnt=5.
  Bus  0, device  10, function  1:
    Class 0800: PCI device 1022:7451 (rev 1).
      Non-prefetchable 64 bit memory at 0xfebff000 [0xfebfffff].
  Bus  0, device  11, function  0:
    Class 0604: PCI device 1022:7450 (rev 18).
      Master Capable.  Latency=64.  Min Gnt=5.
  Bus  0, device  11, function  1:
    Class 0800: PCI device 1022:7451 (rev 1).
      Non-prefetchable 64 bit memory at 0xfebfe000 [0xfebfefff].
  Bus  0, device  24, function  0:
    Class 0600: PCI device 1022:1100 (rev 0).
  Bus  0, device  24, function  1:
    Class 0600: PCI device 1022:1101 (rev 0).
  Bus  0, device  24, function  2:
    Class 0600: PCI device 1022:1102 (rev 0).
  Bus  0, device  24, function  3:
    Class 0600: PCI device 1022:1103 (rev 0).
  Bus  0, device  25, function  0:
    Class 0600: PCI device 1022:1100 (rev 0).
  Bus  0, device  25, function  1:
    Class 0600: PCI device 1022:1101 (rev 0).
  Bus  0, device  25, function  2:
    Class 0600: PCI device 1022:1102 (rev 0).
  Bus  0, device  25, function  3:
    Class 0600: PCI device 1022:1103 (rev 0).
  Bus  3, device   0, function  0:
    Class 0c03: PCI device 1022:7464 (rev 11).
      IRQ 209.
      Master Capable.  Latency=64.  Max Lat=80.
      Non-prefetchable 32 bit memory at 0xfeafc000 [0xfeafcfff].
  Bus  3, device   0, function  1:
    Class 0c03: PCI device 1022:7464 (rev 11).
      IRQ 209.
      Master Capable.  Latency=64.  Max Lat=80.
      Non-prefetchable 32 bit memory at 0xfeafd000 [0xfeafdfff].
  Bus  3, device   6, function  0:
    Class 0300: PCI device 1002:4752 (rev 39).
      IRQ 11.
      Master Capable.  Latency=64.  Min Gnt=8.
      Non-prefetchable 32 bit memory at 0xfd000000 [0xfdffffff].
      I/O at 0xb800 [0xb8ff].
      Non-prefetchable 32 bit memory at 0xfeaff000 [0xfeafffff].
  Bus  3, device   8, function  0:
    Class 0200: PCI device 8086:1229 (rev 16).
      IRQ 201.
      Master Capable.  Latency=64.  Min Gnt=8.Max Lat=56.
      Non-prefetchable 32 bit memory at 0xfeafb000 [0xfeafbfff].
      I/O at 0xbc00 [0xbc3f].
      Non-prefetchable 32 bit memory at 0xfeaa0000 [0xfeabffff].
  Bus  2, device   2, function  0:
    Class 0104: PCI device 13c1:1002 (rev 0).
      IRQ 177.
      Master Capable.  Latency=64.  Min Gnt=9.
      I/O at 0xa800 [0xa8ff].
      Non-prefetchable 64 bit memory at 0xfc9ffc00 [0xfc9ffcff].
      Prefetchable 64 bit memory at 0xfa800000 [0xfaffffff].
  Bus  2, device   9, function  0:
    Class 0200: PCI device 14e4:1648 (rev 3).
      IRQ 185.
      Master Capable.  Latency=64.  Min Gnt=64.
      Non-prefetchable 64 bit memory at 0xfc9a0000 [0xfc9affff].
      Non-prefetchable 64 bit memory at 0xfc990000 [0xfc99ffff].
  Bus  2, device   9, function  1:
    Class 0200: PCI device 14e4:1648 (rev 3).
      IRQ 193.
      Master Capable.  Latency=64.  Min Gnt=64.
      Non-prefetchable 64 bit memory at 0xfc9d0000 [0xfc9dffff].
      Non-prefetchable 64 bit memory at 0xfc9c0000 [0xfc9cffff].
  Bus  1, device   1, function  0:
    Class 0104: PCI device 13c1:1001 (rev 1).
      IRQ 169.
      Master Capable.  Latency=64.  Min Gnt=9.
      I/O at 0x9c00 [0x9c0f].
      Non-prefetchable 32 bit memory at 0xfc7ffc00 [0xfc7ffc0f].
      Non-prefetchable 32 bit memory at 0xfb800000 [0xfbffffff].
Bootdata ok (command line is ro root=LABEL=/)
Linux version 2.6.10-1.770_FC3smp (bhcompile dolly build redhat com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 SMP Thu Feb 24 18:36:43 EST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
 BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data)
 BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS)
 BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
Scanning NUMA topology in Northbridge 24
Number of nodes 2 (10)
Node 0 MemBase 0000000000000000 Limit 000000007fff0000
Skipping disabled node 1
Using node hash shift of 24
Bootmem setup node 0 0000000000000000-000000007fff0000
No mptable found.
On node 0 totalpages: 524272
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 520176 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
ACPI: RSDP (v000 ACPIAM                                ) @ 0x00000000000f6bc0
ACPI: RSDT (v001 A M I  OEMRSDT  0x02000525 MSFT 0x00000097) @ 0x000000007fff0000
ACPI: FADT (v001 A M I  OEMFACP  0x02000525 MSFT 0x00000097) @ 0x000000007fff0200
ACPI: MADT (v001 A M I  OEMAPIC  0x02000525 MSFT 0x00000097) @ 0x000000007fff0380
ACPI: OEMB (v001 A M I  OEMBIOS  0x02000525 MSFT 0x00000097) @ 0x000000007ffff040
ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x000000007fff34e0
ACPI: DSDT (v001  0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @ 0x0000000000000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfebff000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 17, address 0xfebff000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xfebfe000] gsi_base[28])
IOAPIC[2]: apic_id 4, version 17, address 0xfebfe000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Checking aperture...
CPU 0: aperture @ e0000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Built 2 zonelists
Kernel command line: ro root=LABEL=/ console=tty0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 1792.530 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 2056084k/2097088k available (2025k kernel code, 0k reserved, 1240k data, 208k init)
Calibrating delay loop... 3522.56 BogoMIPS (lpj=1761280)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Using local APIC NMI watchdog using perfctr0
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU0: AMD Opteron(tm) Processor 244 stepping 0a
per-CPU timeslice cutoff: 1024.00 usecs.
task migration cache decay timeout: 2 msecs.
Booting processor 1/1 rip 6000 rsp 1007ff85f58
Initializing CPU#1
Calibrating delay loop... 3579.90 BogoMIPS (lpj=1789952)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
AMD Opteron(tm) Processor 244 stepping 0a
Total of 2 processors activated (7102.46 BogoMIPS).
Using local APIC timer interrupts.
Detected 12.448 MHz APIC timer.
checking TSC synchronization across 2 CPUs: passed.
time.c: Using PIT/TSC based timekeeping.
Brought up 2 CPUs
checking if image is initramfs... it is
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to bjorn helgaas hp com
** so I can fix the driver.
PCI-DMA: Disabling IOMMU.
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1112805368.321:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key B36A0C3CDBFF4E02
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU1] (supports 8 throttling states)
Real Time Clock Driver v1.12
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD8111: IDE controller at PCI slot 0000:00:07.1
AMD8111: chipset revision 3
AMD8111: not 100% native mode: will probe irqs later
AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Logitech Mouse on isa0060/serio1
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.00.09e)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
ACPI wakeup devices: 
PCI1 USB0 USB1 PS2K PS2M UAR1 UAR2 GOLA GLAN GOLB SMBC AC97 MODM PWRB 
ACPI: (supports S0 S1 S4 S5)
CPU0:
 domain 0: span 01
  groups: 01
  domain 1: span 03
   groups: 01 02
   domain 2: span 03
    groups: 03
CPU1:
 domain 0: span 02
  groups: 02
  domain 1: span 03
   groups: 02 01
   domain 2: span 03
    groups: 03
Freeing unused kernel memory: 208k freed
SCSI subsystem initialized
3ware Storage Controller device driver for Linux v1.26.02.000.
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 29 (level, low) -> IRQ 169
scsi0 : 3ware Storage Controller
3w-xxxx: scsi0: Found a 3ware Storage Controller at 0x9c00, IRQ: 169.
  Vendor: 3ware     Model: Logical Disk 0    Rev: 1.2 
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sda: 160084480 512-byte hdwr sectors (81963 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 160084480 512-byte hdwr sectors (81963 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
3ware 9000 Storage Controller device driver for Linux v2.26.02.001.
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 26 (level, low) -> IRQ 177
scsi1 : 3ware 9000 Storage Controller
3w-9xxx: scsi1: Found a 3ware 9000 Storage Controller at 0xfc9ffc00, IRQ: 177.
3w-9xxx: scsi1: Firmware FE9X 2.02.00.012, BIOS BE9X 2.02.01.037, Ports: 8.
  Vendor: 3ware     Model: Logical Disk 00   Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sdb: 2929557504 512-byte hdwr sectors (1499933 MB)
SCSI device sdb: drive cache: write back, no read (daft)
SCSI device sdb: 2929557504 512-byte hdwr sectors (1499933 MB)
SCSI device sdb: drive cache: write back, no read (daft)
 sdb: sdb1
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security:  3 users, 4 roles, 320 types, 23 bools
security:  53 classes, 10921 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
tg3.c:v3.14 (November 15, 2004)
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 24 (level, low) -> IRQ 185
divert: allocating divert_blk for eth0
eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:2d:b6:9a
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
ACPI: PCI interrupt 0000:02:09.1[B] -> GSI 25 (level, low) -> IRQ 193
divert: allocating divert_blk for eth1
eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:2d:b6:9b
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
e100: Intel(R) PRO/100 Network Driver, 3.2.3-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI interrupt 0000:03:08.0[A] -> GSI 18 (level, low) -> IRQ 201
divert: allocating divert_blk for eth2
e100: eth2: e100_probe: addr 0xfeafb000, irq 201, MAC addr 00:E0:81:2D:B6:5D
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:03:00.0[D] -> GSI 19 (level, low) -> IRQ 209
ohci_hcd 0000:03:00.0: OHCI Host Controller
ohci_hcd 0000:03:00.0: irq 209, pci mem 0xfeafc000
ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:03:00.1[D] -> GSI 19 (level, low) -> IRQ 209
ohci_hcd 0000:03:00.1: OHCI Host Controller
ohci_hcd 0000:03:00.1: irq 209, pci mem 0xfeafd000
ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
EXT3 FS on sda2, internal journal
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel redhat com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda6, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda5, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdb1, type ext3), uses xattr
Adding 4096564k swap on /dev/sda3.  Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ieee1394: Initialized config rom entry `ip1394'
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
tg3: eth1: Link is up at 100 Mbps, full duplex.
tg3: eth1: Flow control is on for TX and on for RX.
ip_tables: (C) 2000-2002 Netfilter core team
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
lp: driver loaded but no devices found
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff803ecf40(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
Installing knfsd (copyright (C) 1996 okir monad swb de).
SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
3w-9xxx: scsi1: ERROR: (0x03:0x0104): SGL entry has illegal length:address=0x7A951000, length=0xFF, cmd=X.
eth1: no IPv6 routers present
SELinux: initialized (dev 0:27, type nfs), uses genfs_contexts
Disabled Privacy Extensions on device ffffffff803ecf40(lo)
ip_tables: (C) 2000-2002 Netfilter core team
tg3: eth1: Link is up at 100 Mbps, full duplex.
tg3: eth1: Flow control is on for TX and on for RX.
ip_tables: (C) 2000-2002 Netfilter core team
eth1: no IPv6 routers present
SELinux: initialized (dev 0:28, type nfs), uses genfs_contexts

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]