[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Loading bttv module at boot?

On scanning your output, will look closer tonight when I have more
time, I see a lot of irq issues. Don't know if this is your problem,
but a good idea to reduce all errors in bootup, regardless of whether
it's related or not, just to avoid cross-effects.

I see:

PCI: IRQ 0 for device 0000:00:10.0 doesn't match PIRQ mask - try

numerous times.

Also once:

PCI: No IRQ known for interrupt pin A of device 0000:01:00.0. Please try
using pci=biosirq.

I don't know what these are, but they could be avenues of research.

On Apr 12, 2005 10:44 AM, John L. Pierce <bjjp kvnet org> wrote:
> On Tue, 2005-04-12 at 09:18 -0600, Guy Fraser wrote:
> > Check the man page for : mkinitrd
> >
> > I replace the standard initrd file whenever a new kernel comes
> > out for two reasons. The first is that i have an nVidia video
> > card, and I want to use the binary driver, and the second is to
> > automatically load the BTTV module at boot.
> >
> > I can't remember for sure because I wrote a shell script to
> > rebuild everything, but if I remember correctly you add :
> >
> > --with-module=bttv
> >
> > to the mkinitrd command line.
> >
> > There may be another way, but that way works for sure, and ensures
> > that if you have a usb web cam, it doesn't take /dev/video0. ;-)
> >
> > Good luck
> Thank you for your input.
> I replaced the initrd file with a new one, but still no luck with have
> the bttv driver load a boot.
> John
> --
> fedora-list mailing list
> fedora-list redhat com
> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]