[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

About Montavista IPMI modules included in Fedora...



	Hi there,

	I was trying to use the, may be, "existing" support in FC3 for IPMI.

	I've seen that there are several modules in /lib/modules/2.6.9-1.667
[smp]/kernel/drivers/char/ipmi that seem to be related with th OpenIPMI
project. There are also the three headers in /lib/modules/2.6.9-1.667
[smp]/build/include/linux ipmi.h, ipmi_msgdefs.h, ipmi_si.h.

	However, trying to run this modules by doing:

	insmod ipmi_msghandler.ko
	insmod ipmi_devintf.ko
	insmod ipmi_watchdog.ko
	insmod ipmi_poweroff.ko
	insmod ipmi_si.ko

seems to work half the way, as the last command complains of not finding
the device with the following messages in dmesg:

IPMI System Interface driver version v33, KCS version v33, SMIC version
v33, BT version v33
ACPI: System description tables not found
ipmi_si: Found SMBIOS-specified state machine at I/O address 0xca9
Trying to free free IRQ4
ipmi_si: Unable to find any System Interface(s)

even so, the device appears in /proc/devices with major 254 just loading
the ipmi_msghandler.ko module, but any attempt to open it (after being
created with mknod) gives the EINVAL error..

	So, I would like to know if FC3 supports natively IPMI and under which
conditions. If it doesn't, what are the modules ipmi_* for?.

	Should I use the Montavista kernel patches in order to get support for
IPMI in FC3?

David.

Linux version 2.6.9-1.667 (bhcompile tweety build redhat com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Tue Nov 2 14:41:25 EST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
 BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
512MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 131072
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126976 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: Unable to locate RSDP
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet ipmi_si=smic,p0xCA9,nodefaults ipmi_smb=0,0x20
mapped 4G/4G trampoline to ffff4000.
Initializing CPU#0
CPU 0 irqstacks, hard=023d5000 soft=023d4000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2194.780 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 515144k/524288k available (2068k kernel code, 8588k reserved, 647k data, 144k init, 0k highmem)
Calibrating delay loop... 4308.99 BogoMIPS (lpj=2154496)
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000
CPU: After vendor identify, caps:  bfebf9ff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps:        bfebf1ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 385k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd9ff, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
PCI: Discovered peer bus 01
PCI: Discovered primary peer bus 03 [IRQ]
PCI: Using IRQ router ServerWorks [1166/0201] at 0000:00:0f.0
cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available.
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1113387572.201:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 6ECDA687281A73E5
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1
SvrWks CSB5: chipset revision 147
SvrWks CSB5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1040-0x1047, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x1048-0x104f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
ide0: Wait for ready failed before probe !
Probing IDE interface ide1...
hdc: HITACHI_DK23DA-10, ATA DISK drive
Using cfq io scheduler
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide0...
ide0: Wait for ready failed before probe !
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hdc: max request size: 128KiB
hdc: 19640880 sectors (10056 MB) w/2048KiB Cache, CHS=19485/16/63, UDMA(100)
hdc: cache flushes supported
 hdc: hdc1 hdc2
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 131072 bind 37449)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 144k freed
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security:  3 users, 4 roles, 280 types, 16 bools
security:  53 classes, 5494 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev hdc1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SCSI subsystem initialized
PCI: Found IRQ 11 for device 0000:01:03.0
sym0: <1010-66> rev 0x1 at pci 0000:01:03.0 irq 11
sym0: using 64 bit DMA addressing
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18j
inserting floppy driver for 2.6.9-1.667
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Intel(R) PRO/1000 Network Driver - version 5.7.6-NAPI
Copyright (c) 1999-2004 Intel Corporation.
PCI: Found IRQ 10 for device 0000:00:04.0
divert: allocating divert_blk for eth0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
PCI: Found IRQ 12 for device 0000:01:02.0
divert: allocating divert_blk for eth1
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
PCI: Found IRQ 9 for device 0000:01:02.1
divert: allocating divert_blk for eth2
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
scb2_flash: warning - can't reserve rom window, continuing
CFI: Found no SCB2 BIOS Flash device at location zero
scb2_flash: flash probe failed!
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Found IRQ 9 for device 0000:00:0f.2
ohci_hcd 0000:00:0f.2: OHCI Host Controller
ohci_hcd 0000:00:0f.2: irq 9, pci mem 22880000
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 1-1: new low speed USB device using address 2
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:0f.2-1
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
Disabled Privacy Extensions on device 02369a00(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
EXT3 FS on hdc1, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm uk sistina com
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2474000k swap on /dev/hdc2.  Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
i2c /dev entries driver
eth0: no IPv6 routers present
eth1: no IPv6 routers present
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
ipmi message handler version v33
ipmi device interface version v33
IPMI System Interface driver version v33, KCS version v33, SMIC version v33, BT version v33
ACPI: System description tables not found
ipmi_si: Found SMBIOS-specified state machine at I/O address 0xca9
Trying to free free IRQ4
ipmi_si: Unable to find any System Interface(s)

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]