[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: ACPI PNP errors



Am So, den 17.04.2005 schrieb Marlon Bastida um 6:31:

>    Im using FC3 with lastest kernel:
> 2.6.11-1.14
> I have a PCI card (sound blaster live) and an onboard AC'97.
> My motherboard is a INTEL D845GRG. I have a GF4 MSI MX 440 too. With
> drivers 7167 working well.
>    My mboard have 2 options for ACPI, s1 state and s3 state. I tested
> with both but I get these messages again on dmesg.
> On Xp professional I didn't get any errors...

When did Windows® ever print out verbose and meaningful messages?

> I would like to know, How can I correct theses errors from dmesg
> output, related to ACPI and PNP??
> 
> Linux version 2.6.11-1.14_FC3 (bhcompile bugs build redhat com) (gcc
> version 3.4.3 20050227 (Red Hat 3.4.3-22)) #1 Thu Apr 7 19:23:49 EDT
> 2005
[ ... ]
> PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20050211
> ACPI: Interpreter enabled
> ACPI: Using PIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> PCI: Transparent bridge - 0000:00:1e.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> ACPI: Power Resource [URP1] (off)
> ACPI: Power Resource [FDDP] (off)
> ACPI: Power Resource [LPTP] (off)
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
>    ACPI-1138: *** Error: Method execution failed [\MCTH] (Node
> dff3ee40), AE_AML_BUFFER_LIMIT
>    ACPI-1138: *** Error: Method execution failed [\OSFL] (Node
> dff3ee60), AE_AML_BUFFER_LIMIT
>    ACPI-1138: *** Error: Method execution failed [\_SB_.SYSM._CRS]
> (Node c14de800), AE_AML_BUFFER_LIMIT
>    ACPI-0158: *** Error: Method execution failed [\_SB_.SYSM._CRS]
> (Node c14de800), AE_AML_BUFFER_LIMIT
> pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
> pnp: PnP ACPI: found 12 devices
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> ** PCI interrupts are no longer routed automatically.  If this
> ** causes a device to stop working, it is probably because the
> ** driver failed to call pci_enable_device().  As a temporary
> ** workaround, the "pci=routeirq" argument restores the old
> ** behavior.  If this argument makes the device work again,
> ** please email the output of "lspci" to bjorn helgaas hp com
> ** so I can fix the driver.

You tested what it says above?

>    ACPI-1138: *** Error: Method execution failed [\MCTH] (Node
> dff3ee40), AE_AML_BUFFER_LIMIT
>    ACPI-1138: *** Error: Method execution failed [\OSFL] (Node
> dff3ee60), AE_AML_BUFFER_LIMIT
>    ACPI-1138: *** Error: Method execution failed [\_SB_.SYSM._CRS]
> (Node c14de800), AE_AML_BUFFER_LIMIT
>    ACPI-0158: *** Error: Method execution failed [\_SB_.SYSM._CRS]
> (Node c14de800), AE_AML_BUFFER_LIMIT
> pnp: 00:0b: ioport range 0x400-0x47f could not be reserved
> pnp: 00:0b: ioport range 0x680-0x6ff has been reserved
> pnp: 00:0b: ioport range 0x480-0x4bf has been reserved
> apm: BIOS not found.

You see any misbehaviour of your system besides those messages?

Alexander


-- 
Alexander Dalloz | Enger, Germany | GPG http://pgp.mit.edu 0xB366A773
legal statement: http://www.uni-x.org/legal.html
Fedora Core 2 GNU/Linux on Athlon with kernel 2.6.11-1.14_FC2smp 
Serendipity 17:00:22 up 5 days, 13:40, load average: 0.19, 0.14, 0.10 

Attachment: signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]